updated

Signed-off-by: Robert Shaw <robshaw@redhat.com>

.buildkite/nightly-benchmarks/README.md

@@ -74,7 +74,7 @@ Here is an example of one test inside `latency-tests.json`:
 In this example:
 
 - The `test_name` attributes is a unique identifier for the test. In `latency-tests.json`, it must start with `latency_`.
-- The `parameters` attribute control the command line arguments to be used for `vllm bench latency`. Note that please use underline `_` instead of the dash `-` when specifying the command line arguments, and `run-performance-benchmarks.sh` will convert the underline to dash when feeding the arguments to `vllm bench latency`. For example, the corresponding command line arguments for `vllm bench latency` will be `--model meta-llama/Meta-Llama-3-8B --tensor-parallel-size 1 --load-format dummy --num-iters-warmup 5 --num-iters 15`
+- The `parameters` attribute control the command line arguments to be used for `benchmark_latency.py`. Note that please use underline `_` instead of the dash `-` when specifying the command line arguments, and `run-performance-benchmarks.sh` will convert the underline to dash when feeding the arguments to `benchmark_latency.py`. For example, the corresponding command line arguments for `benchmark_latency.py` will be `--model meta-llama/Meta-Llama-3-8B --tensor-parallel-size 1 --load-format dummy --num-iters-warmup 5 --num-iters 15`
 
 Note that the performance numbers are highly sensitive to the value of the parameters. Please make sure the parameters are set correctly.
 
@@ -82,13 +82,13 @@ WARNING: The benchmarking script will save json results by itself, so please do
 
 ### Throughput test
 
-The tests are specified in `throughput-tests.json`. The syntax is similar to `latency-tests.json`, except for that the parameters will be fed forward to `vllm bench throughput`.
+The tests are specified in `throughput-tests.json`. The syntax is similar to `latency-tests.json`, except for that the parameters will be fed forward to `benchmark_throughput.py`.
 
 The number of this test is also stable -- a slight change on the value of this number might vary the performance numbers by a lot.
 
 ### Serving test
 
-We test the throughput by using `vllm bench serve` with request rate = inf to cover the online serving overhead. The corresponding parameters are in `serving-tests.json`, and here is an example:
+We test the throughput by using `benchmark_serving.py` with request rate = inf to cover the online serving overhead. The corresponding parameters are in `serving-tests.json`, and here is an example:
 
 ```json
 [
@@ -118,8 +118,8 @@ Inside this example:
 
 - The `test_name` attribute is also a unique identifier for the test. It must start with `serving_`.
 - The `server-parameters` includes the command line arguments for vLLM server.
-- The `client-parameters` includes the command line arguments for `vllm bench serve`.
-- The `qps_list` controls the list of qps for test. It will be used to configure the `--request-rate` parameter in `vllm bench serve`
+- The `client-parameters` includes the command line arguments for `benchmark_serving.py`.
+- The `qps_list` controls the list of qps for test. It will be used to configure the `--request-rate` parameter in `benchmark_serving.py`
 
 The number of this test is less stable compared to the delay and latency benchmarks (due to randomized sharegpt dataset sampling inside `benchmark_serving.py`), but a large change on this number (e.g. 5% change) still vary the output greatly.
 

.buildkite/nightly-benchmarks/scripts/convert-results-json-to-markdown.py

@@ -100,7 +100,7 @@ if __name__ == "__main__":
             raw_result = json.loads(f.read())
 
         if "serving" in str(test_file):
-            # this result is generated via `vllm bench serve` command
+            # this result is generated via `benchmark_serving.py`
 
             # attach the benchmarking command to raw_result
             try:
@@ -120,7 +120,7 @@ if __name__ == "__main__":
             continue
 
         elif "latency" in f.name:
-            # this result is generated via `vllm bench latency` command
+            # this result is generated via `benchmark_latency.py`
 
             # attach the benchmarking command to raw_result
             try:
@@ -148,7 +148,7 @@ if __name__ == "__main__":
             continue
 
         elif "throughput" in f.name:
-            # this result is generated via `vllm bench throughput` command
+            # this result is generated via `benchmark_throughput.py`
 
             # attach the benchmarking command to raw_result
             try:

.buildkite/nightly-benchmarks/scripts/run-nightly-benchmarks.sh

@@ -73,7 +73,7 @@ get_current_llm_serving_engine() {
     echo "Container: vllm"
     # move to a completely irrelevant directory, to avoid import vllm from current folder
     export CURRENT_LLM_SERVING_ENGINE=vllm
-
+    
     return
   fi
 }
@@ -95,14 +95,12 @@ json2args() {
 }
 
 kill_gpu_processes() {
-  pkill -f '[p]ython'
-  pkill -f '[p]ython3'
-  pkill -f '[t]ritonserver'
-  pkill -f '[p]t_main_thread'
-  pkill -f '[t]ext-generation'
-  pkill -f '[l]mdeploy'
-  # vLLM now names the process with VLLM prefix after https://github.com/vllm-project/vllm/pull/21445
-  pkill -f '[V]LLM'
+  pkill -f python
+  pkill -f python3
+  pkill -f tritonserver
+  pkill -f pt_main_thread
+  pkill -f text-generation
+  pkill -f lmdeploy
 
   while [ "$(nvidia-smi --query-gpu=memory.used --format=csv,noheader,nounits | head -n 1)" -ge 1000 ]; do
     sleep 1
@@ -127,7 +125,7 @@ ensure_installed() {
 }
 
 run_serving_tests() {
-  # run serving tests using `vllm bench serve` command
+  # run serving tests using `benchmark_serving.py`
   # $1: a json file specifying serving test cases
 
   local serving_test_file
@@ -227,7 +225,7 @@ run_serving_tests() {
 
       if [[ "$dataset_name" = "sharegpt" ]]; then
 
-        client_command="vllm bench serve \
+        client_command="python3 benchmark_serving.py \
           --backend $backend \
           --tokenizer /tokenizer_cache \
           --model $model \
@@ -248,7 +246,7 @@ run_serving_tests() {
         sonnet_output_len=$(echo "$common_params" | jq -r '.sonnet_output_len')
         sonnet_prefix_len=$(echo "$common_params" | jq -r '.sonnet_prefix_len')
 
-        client_command="vllm bench serve \
+        client_command="python3 benchmark_serving.py \
           --backend $backend \
           --tokenizer /tokenizer_cache \
           --model $model \
@@ -267,13 +265,13 @@ run_serving_tests() {
           $client_args"
 
       else
-
+  
         echo "The dataset name must be either 'sharegpt' or 'sonnet'. Got $dataset_name."
         exit 1
 
       fi
 
-
+        
 
       echo "Running test case $test_name with qps $qps"
       echo "Client command: $client_command"
@@ -304,7 +302,7 @@ run_serving_tests() {
 }
 
 run_genai_perf_tests() {
-  # run genai-perf tests
+  # run genai-perf tests 
 
   # $1: a json file specifying genai-perf test cases
   local genai_perf_test_file
@@ -313,14 +311,14 @@ run_genai_perf_tests() {
   # Iterate over genai-perf tests
   jq -c '.[]' "$genai_perf_test_file" | while read -r params; do
     # get the test name, and append the GPU type back to it.
-    test_name=$(echo "$params" | jq -r '.test_name')
-
+    test_name=$(echo "$params" | jq -r '.test_name')    
+    
     # if TEST_SELECTOR is set, only run the test cases that match the selector
     if [[ -n "$TEST_SELECTOR" ]] && [[ ! "$test_name" =~ $TEST_SELECTOR ]]; then
       echo "Skip test case $test_name."
       continue
     fi
-
+    
     # prepend the current serving engine to the test name
     test_name=${CURRENT_LLM_SERVING_ENGINE}_${test_name}
 
@@ -371,10 +369,10 @@ run_genai_perf_tests() {
         qps=$num_prompts
         echo "now qps is $qps"
       fi
-
+    
       new_test_name=$test_name"_qps_"$qps
       backend=$CURRENT_LLM_SERVING_ENGINE
-
+      
       if [[ "$backend" == *"vllm"* ]]; then
         backend="vllm"
       fi
@@ -415,7 +413,7 @@ prepare_dataset() {
   do
     cat sonnet.txt >> sonnet_4x.txt
   done
-
+  
 }
 
 main() {

.buildkite/nightly-benchmarks/scripts/run-performance-benchmarks.sh

@@ -126,8 +126,7 @@ kill_gpu_processes() {
   ps -aux
   lsof -t -i:8000 | xargs -r kill -9
   pgrep python3 | xargs -r kill -9
-  # vLLM now names the process with VLLM prefix after https://github.com/vllm-project/vllm/pull/21445
-  pgrep VLLM | xargs -r kill -9
+
 
   # wait until GPU memory usage smaller than 1GB
   if command -v nvidia-smi; then
@@ -165,7 +164,7 @@ upload_to_buildkite() {
 }
 
 run_latency_tests() {
-  # run latency tests using `vllm bench latency` command
+  # run latency tests using `benchmark_latency.py`
   # $1: a json file specifying latency test cases
 
   local latency_test_file
@@ -206,7 +205,7 @@ run_latency_tests() {
       fi
     fi
 
-    latency_command=" $latency_envs vllm bench latency \
+    latency_command=" $latency_envs python3 benchmark_latency.py \
       --output-json $RESULTS_FOLDER/${test_name}.json \
       $latency_args"
 
@@ -232,7 +231,7 @@ run_latency_tests() {
 }
 
 run_throughput_tests() {
-  # run throughput tests using `vllm bench throughput`
+  # run throughput tests using `benchmark_throughput.py`
   # $1: a json file specifying throughput test cases
 
   local throughput_test_file
@@ -273,7 +272,7 @@ run_throughput_tests() {
       fi
     fi
 
-    throughput_command=" $throughput_envs vllm bench throughput \
+    throughput_command=" $throughput_envs python3 benchmark_throughput.py \
       --output-json $RESULTS_FOLDER/${test_name}.json \
       $throughput_args"
 
@@ -298,7 +297,7 @@ run_throughput_tests() {
 }
 
 run_serving_tests() {
-  # run serving tests using `vllm bench serve` command
+  # run serving tests using `benchmark_serving.py`
   # $1: a json file specifying serving test cases
 
   local serving_test_file
@@ -394,7 +393,7 @@ run_serving_tests() {
 
       # pass the tensor parallel size to the client so that it can be displayed
       # on the benchmark dashboard
-      client_command="vllm bench serve \
+      client_command="python3 benchmark_serving.py \
         --save-result \
         --result-dir $RESULTS_FOLDER \
         --result-filename ${new_test_name}.json \
@@ -448,7 +447,7 @@ main() {
   (which jq) || (apt-get update && apt-get -y install jq)
   (which lsof) || (apt-get update && apt-get install -y lsof)
 
-  # get the current IP address, required by `vllm bench serve` command
+  # get the current IP address, required by benchmark_serving.py
   export VLLM_HOST_IP=$(hostname -I | awk '{print $1}')
   # turn of the reporting of the status of each request, to clean up the terminal output
   export VLLM_LOGGING_LEVEL="WARNING"

.buildkite/scripts/hardware_ci/run-cpu-test.sh

@@ -13,9 +13,9 @@ NUMA_NODE=${NUMA_NODE:-1}
 export CMAKE_BUILD_PARALLEL_LEVEL=32
 
 # Setup cleanup
-remove_docker_container() {
-    set -e;
-    docker rm -f cpu-test-"$NUMA_NODE" cpu-test-"$NUMA_NODE"-avx2 || true;
+remove_docker_container() { 
+    set -e; 
+    docker rm -f cpu-test-"$NUMA_NODE" cpu-test-"$NUMA_NODE"-avx2 || true; 
 }
 trap remove_docker_container EXIT
 remove_docker_container
@@ -69,7 +69,7 @@ function cpu_tests() {
   docker exec cpu-test-"$NUMA_NODE" bash -c "
     set -e
     pytest -s -v \
-    tests/quantization/test_compressed_tensors.py::test_compressed_tensors_w8a8_logprobs[False-10-32-neuralmagic/Llama-3.2-1B-quantized.w8a8]"
+    tests/quantization/test_compressed_tensors.py::test_compressed_tensors_w8a8_logprobs[False-10-32-neuralmagic/Llama-3.2-1B-quantized.w8a8]" 
 
   # Note: disable it until supports V1
   # Run AWQ test
@@ -78,23 +78,23 @@ function cpu_tests() {
   #   VLLM_USE_V1=0 pytest -s -v \
   #   tests/quantization/test_ipex_quant.py"
 
-  # Run multi-lora tests
-  docker exec cpu-test-"$NUMA_NODE" bash -c "
-    set -e
-    pytest -s -v \
-    tests/lora/test_qwen2vl.py"
-
   # online serving
   docker exec cpu-test-"$NUMA_NODE" bash -c '
     set -e
     VLLM_CPU_OMP_THREADS_BIND=$E2E_OMP_THREADS VLLM_CPU_SGL_KERNEL=1 vllm serve meta-llama/Llama-3.2-3B-Instruct -tp=2 -pp=2 &
     timeout 600 bash -c "until curl localhost:8000/v1/models; do sleep 1; done" || exit 1
-    vllm bench serve \
+    python3 benchmarks/benchmark_serving.py \
       --backend vllm \
       --dataset-name random \
       --model meta-llama/Llama-3.2-3B-Instruct \
       --num-prompts 20 \
       --endpoint /v1/completions'
+
+  # Run multi-lora tests
+  docker exec cpu-test-"$NUMA_NODE" bash -c "
+    set -e
+    pytest -s -v \
+    tests/lora/test_qwen2vl.py"
 }
 
 # All of CPU tests are expected to be finished less than 40 mins.

.buildkite/scripts/hardware_ci/run-tpu-v1-test-part2.sh

@@ -1,166 +0,0 @@
-#!/bin/bash
-
-set -xu
-
-
-remove_docker_container() { 
-    docker rm -f tpu-test || true; 
-    docker rm -f vllm-tpu || true;
-}
-
-trap remove_docker_container EXIT
-
-# Remove the container that might not be cleaned up in the previous run.
-remove_docker_container
-
-# Build the docker image.
-docker build -f docker/Dockerfile.tpu -t vllm-tpu .
-
-# Set up cleanup.
-cleanup_docker() {
-  # Get Docker's root directory
-  docker_root=$(docker info -f '{{.DockerRootDir}}')
-  if [ -z "$docker_root" ]; then
-    echo "Failed to determine Docker root directory."
-    exit 1
-  fi
-  echo "Docker root directory: $docker_root"
-  # Check disk usage of the filesystem where Docker's root directory is located
-  disk_usage=$(df "$docker_root" | tail -1 | awk '{print $5}' | sed 's/%//')
-  # Define the threshold
-  threshold=70
-  if [ "$disk_usage" -gt "$threshold" ]; then
-    echo "Disk usage is above $threshold%. Cleaning up Docker images and volumes..."
-    # Remove dangling images (those that are not tagged and not used by any container)
-    docker image prune -f
-    # Remove unused volumes / force the system prune for old images as well.
-    docker volume prune -f && docker system prune --force --filter "until=72h" --all
-    echo "Docker images and volumes cleanup completed."
-  else
-    echo "Disk usage is below $threshold%. No cleanup needed."
-  fi
-}
-cleanup_docker
-
-# For HF_TOKEN.
-source /etc/environment
-
-docker run --privileged --net host --shm-size=16G -it \
-    -e "HF_TOKEN=$HF_TOKEN" --name tpu-test \
-    vllm-tpu /bin/bash -c '
-set -e # Exit immediately if a command exits with a non-zero status.
-set -u # Treat unset variables as an error.
-
-echo "--- Starting script inside Docker container ---"
-
-# Create results directory
-RESULTS_DIR=$(mktemp -d)
-# If mktemp fails, set -e will cause the script to exit.
-echo "Results will be stored in: $RESULTS_DIR"
-
-# Install dependencies
-echo "--- Installing Python dependencies ---"
-python3 -m pip install --progress-bar off git+https://github.com/thuml/depyf.git \
-    && python3 -m pip install --progress-bar off pytest pytest-asyncio tpu-info \
-    && python3 -m pip install --progress-bar off lm_eval[api]==0.4.4 \
-    && python3 -m pip install --progress-bar off hf-transfer
-echo "--- Python dependencies installed ---"
-export VLLM_USE_V1=1
-export VLLM_XLA_CHECK_RECOMPILATION=1
-export VLLM_XLA_CACHE_PATH=
-echo "Using VLLM V1"
-
-echo "--- Hardware Information ---"
-# tpu-info
-echo "--- Starting Tests ---"
-set +e
-overall_script_exit_code=0
-
-# --- Test Definitions ---
-# If a test fails, this function will print logs and will not cause the main script to exit.
-run_test() {
-    local test_num=$1
-    local test_name=$2
-    local test_command=$3
-    local log_file="$RESULTS_DIR/test_${test_num}.log"
-    local actual_exit_code
-
-    echo "--- TEST_$test_num: Running $test_name ---"
-    
-    # Execute the test command.
-    eval "$test_command" > >(tee -a "$log_file") 2> >(tee -a "$log_file" >&2)
-    actual_exit_code=$?
-
-    echo "TEST_${test_num}_COMMAND_EXIT_CODE: $actual_exit_code" # This goes to main log
-    echo "TEST_${test_num}_COMMAND_EXIT_CODE: $actual_exit_code" >> "$log_file" # Also to per-test log
-
-    if [ "$actual_exit_code" -ne 0 ]; then
-        echo "TEST_$test_num ($test_name) FAILED with exit code $actual_exit_code." >&2
-        echo "--- Log for failed TEST_$test_num ($test_name) ---" >&2
-        if [ -f "$log_file" ]; then
-            cat "$log_file" >&2
-        else
-            echo "Log file $log_file not found for TEST_$test_num ($test_name)." >&2
-        fi
-        echo "--- End of log for TEST_$test_num ($test_name) ---" >&2
-        return "$actual_exit_code" # Return the failure code
-    else
-        echo "TEST_$test_num ($test_name) PASSED."
-        return 0 # Return success
-    fi
-}
-
-# Helper function to call run_test and update the overall script exit code
-run_and_track_test() {
-    local test_num_arg="$1"
-    local test_name_arg="$2"
-    local test_command_arg="$3"
-
-    # Run the test
-    run_test "$test_num_arg" "$test_name_arg" "$test_command_arg"
-    local test_specific_exit_code=$?
-
-    # If the test failed, set the overall script exit code to 1
-    if [ "$test_specific_exit_code" -ne 0 ]; then
-        # No need for extra echo here, run_test already logged the failure.
-        overall_script_exit_code=1
-    fi
-}
-
-# --- Actual Test Execution ---
-run_and_track_test 1 "test_struct_output_generate.py" \
-    "HF_HUB_DISABLE_XET=1 python3 -m pytest -s -v /workspace/vllm/tests/v1/entrypoints/llm/test_struct_output_generate.py -k \"not test_structured_output_with_reasoning_matrices\""
-run_and_track_test 2 "test_moe_pallas.py" \
-    "python3 -m pytest -s -v /workspace/vllm/tests/tpu/test_moe_pallas.py"
-run_and_track_test 3 "test_lora.py" \
-    "VLLM_XLA_CHECK_RECOMPILATION=0 python3 -m pytest -s -v /workspace/vllm/tests/tpu/lora/test_lora.py"
-run_and_track_test 4 "test_tpu_qkv_linear.py" \
-    "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_tpu_qkv_linear.py"
-run_and_track_test 5 "test_spmd_model_weight_loading.py" \
-    "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_spmd_model_weight_loading.py"
-run_and_track_test 6 "test_kv_cache_update_kernel.py" \
-    "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_kv_cache_update_kernel.py"
-
-# After all tests have been attempted, exit with the overall status.
-if [ "$overall_script_exit_code" -ne 0 ]; then
-    echo "--- One or more tests FAILED. Overall script exiting with failure code 1. ---"
-else
-    echo "--- All tests have completed and PASSED. Overall script exiting with success code 0. ---"
-fi
-exit "$overall_script_exit_code"
-' # IMPORTANT: This is the closing single quote for the bash -c "..." command. Ensure it is present and correct.
-
-# Capture the exit code of the docker run command
-DOCKER_RUN_EXIT_CODE=$?
-
-# The trap will run for cleanup.
-# Exit the main script with the Docker run command's exit code.
-if [ "$DOCKER_RUN_EXIT_CODE" -ne 0 ]; then
-    echo "Docker run command failed with exit code $DOCKER_RUN_EXIT_CODE."
-    exit "$DOCKER_RUN_EXIT_CODE"
-else
-    echo "Docker run command completed successfully."
-    exit 0
-fi
-# TODO: This test fails because it uses RANDOM_SEED sampling
-# pytest -v -s /workspace/vllm/tests/tpu/test_custom_dispatcher.py \

.buildkite/scripts/hardware_ci/run-tpu-v1-test.sh

@@ -62,8 +62,7 @@ echo "Results will be stored in: $RESULTS_DIR"
 echo "--- Installing Python dependencies ---"
 python3 -m pip install --progress-bar off git+https://github.com/thuml/depyf.git \
     && python3 -m pip install --progress-bar off pytest pytest-asyncio tpu-info \
-    && python3 -m pip install --progress-bar off lm_eval[api]==0.4.4 \
-    && python3 -m pip install --progress-bar off hf-transfer
+    && python3 -m pip install --progress-bar off lm_eval[api]==0.4.4
 echo "--- Python dependencies installed ---"
 export VLLM_USE_V1=1
 export VLLM_XLA_CHECK_RECOMPILATION=1
@@ -135,7 +134,7 @@ run_and_track_test 1 "test_compilation.py" \
 run_and_track_test 2 "test_basic.py" \
     "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_basic.py"
 run_and_track_test 3 "test_accuracy.py::test_lm_eval_accuracy_v1_engine" \
-    "HF_HUB_DISABLE_XET=1 python3 -m pytest -s -v /workspace/vllm/tests/entrypoints/llm/test_accuracy.py::test_lm_eval_accuracy_v1_engine"
+    "python3 -m pytest -s -v /workspace/vllm/tests/entrypoints/llm/test_accuracy.py::test_lm_eval_accuracy_v1_engine"
 run_and_track_test 4 "test_quantization_accuracy.py" \
     "python3 -m pytest -s -v /workspace/vllm/tests/tpu/test_quantization_accuracy.py"
 run_and_track_test 5 "examples/offline_inference/tpu.py" \
@@ -150,6 +149,18 @@ run_and_track_test 9 "test_multimodal.py" \
     "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_multimodal.py"
 run_and_track_test 10 "test_pallas.py" \
     "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_pallas.py"
+run_and_track_test 11 "test_struct_output_generate.py" \
+    "python3 -m pytest -s -v /workspace/vllm/tests/v1/entrypoints/llm/test_struct_output_generate.py -k \"not test_structured_output_with_reasoning_matrices\""
+run_and_track_test 12 "test_moe_pallas.py" \
+    "python3 -m pytest -s -v /workspace/vllm/tests/tpu/test_moe_pallas.py"
+run_and_track_test 13 "test_lora.py" \
+    "VLLM_XLA_CHECK_RECOMPILATION=0 python3 -m pytest -s -v /workspace/vllm/tests/tpu/lora/test_lora.py"
+run_and_track_test 14 "test_tpu_qkv_linear.py" \
+    "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_tpu_qkv_linear.py"
+run_and_track_test 15 "test_spmd_model_weight_loading.py" \
+    "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_spmd_model_weight_loading.py"
+run_and_track_test 16 "test_kv_cache_update_kernel.py" \
+    "python3 -m pytest -s -v /workspace/vllm/tests/v1/tpu/test_kv_cache_update_kernel.py"
 
 # After all tests have been attempted, exit with the overall status.
 if [ "$overall_script_exit_code" -ne 0 ]; then

.buildkite/scripts/hardware_ci/run-xpu-test.sh

@@ -31,13 +31,4 @@ docker run \
     VLLM_USE_V1=1 python3 examples/offline_inference/basic/generate.py --model facebook/opt-125m --block-size 64 --enforce-eager -tp 2 --distributed-executor-backend mp
     cd tests
     pytest -v -s v1/core
-    pytest -v -s v1/engine
-    pytest -v -s v1/sample --ignore=v1/sample/test_logprobs.py --ignore=v1/sample/test_logprobs_e2e.py
-    pytest -v -s v1/worker --ignore=v1/worker/test_gpu_model_runner.py
-    pytest -v -s v1/structured_output
-    pytest -v -s v1/spec_decode --ignore=v1/spec_decode/test_max_len.py --ignore=v1/spec_decode/test_eagle.py
-    pytest -v -s v1/kv_connector/unit --ignore=v1/kv_connector/unit/test_multi_connector.py --ignore=v1/kv_connector/unit/test_nixl_connector.py
-    pytest -v -s v1/test_serial_utils.py
-    pytest -v -s v1/test_utils.py
-    pytest -v -s v1/test_metrics_reader.py
 '

.buildkite/scripts/run-benchmarks.sh

@@ -11,10 +11,10 @@ cd "$(dirname "${BASH_SOURCE[0]}")/../.."
 (which wget && which curl) || (apt-get update && apt-get install -y wget curl)
 
 # run python-based benchmarks and upload the result to buildkite
-vllm bench latency --output-json latency_results.json 2>&1 | tee benchmark_latency.txt
+python3 benchmarks/benchmark_latency.py --output-json latency_results.json 2>&1 | tee benchmark_latency.txt
 bench_latency_exit_code=$?
 
-vllm bench throughput --input-len 256 --output-len 256 --output-json throughput_results.json 2>&1 | tee benchmark_throughput.txt
+python3 benchmarks/benchmark_throughput.py --input-len 256 --output-len 256 --output-json throughput_results.json 2>&1 | tee benchmark_throughput.txt
 bench_throughput_exit_code=$?
 
 # run server-based benchmarks and upload the result to buildkite
@@ -24,7 +24,7 @@ wget https://huggingface.co/datasets/anon8231489123/ShareGPT_Vicuna_unfiltered/r
 
 # wait for server to start, timeout after 600 seconds
 timeout 600 bash -c 'until curl localhost:8000/v1/models; do sleep 1; done' || exit 1
-vllm bench serve \
+python3 benchmarks/benchmark_serving.py \
     --backend vllm \
     --dataset-name sharegpt \
     --dataset-path ./ShareGPT_V3_unfiltered_cleaned_split.json \

.buildkite/scripts/tpu/run_bm.sh

@@ -77,7 +77,7 @@ done
 echo "run benchmark test..."
 echo "logging to $BM_LOG"
 echo
-vllm bench serve \
+python benchmarks/benchmark_serving.py \
     --backend vllm \
     --model $MODEL  \
     --dataset-name sonnet \

.buildkite/test-pipeline.yaml

@@ -720,7 +720,6 @@ steps:
   - VLLM_USE_V1=0 CUDA_VISIBLE_DEVICES=0,1 pytest -v -s test_sharded_state_loader.py
   - VLLM_USE_V1=0 CUDA_VISIBLE_DEVICES=0,1 pytest -v -s kv_transfer/test_disagg.py
   - CUDA_VISIBLE_DEVICES=0,1 pytest -v -s v1/shutdown
-  - pytest -v -s models/multimodal/generation/test_maverick.py
 
 - label: Plugin Tests (2 GPUs) # 40min
   mirror_hardwares: [amdexperimental]

.github/CODEOWNERS

@@ -52,15 +52,3 @@ CMakeLists.txt @tlrmchlsmth @LucasWilkinson
 # Docs
 /docs @hmellor
 mkdocs.yaml @hmellor
-
-# CPU
-/vllm/v1/worker/^cpu @bigPYJ1151
-/csrc/cpu @bigPYJ1151
-/vllm/platforms/cpu.py @bigPYJ1151
-/cmake/cpu_extension.cmake @bigPYJ1151
-/docker/Dockerfile.cpu @bigPYJ1151
-
-# Intel GPU
-/vllm/v1/worker/^xpu @jikunshang
-/vllm/platforms/xpu.py @jikunshang
-/docker/Dockerfile.xpu @jikunshang

.github/workflows/lint-and-deploy.yaml

@@ -7,7 +7,7 @@ permissions:
 
 jobs:
   lint-and-deploy:
-    runs-on: ubuntu-24.04-arm
+    runs-on: ubuntu-latest
     steps:
       - name: Checkout
         uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2

CMakeLists.txt

@@ -635,7 +635,7 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
                      "in CUDA target architectures.")
     endif()
   endif()
-
+  
   cuda_archs_loose_intersection(SCALED_MM_ARCHS "10.0a" "${CUDA_ARCHS}")
   if(${CMAKE_CUDA_COMPILER_VERSION} VERSION_GREATER_EQUAL 12.8 AND SCALED_MM_ARCHS)
     set(SRCS "csrc/quantization/cutlass_w8a8/moe/blockwise_scaled_group_mm_sm100.cu")
@@ -768,14 +768,6 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   list(APPEND VLLM_MOE_EXT_SRC "csrc/moe/moe_wna16.cu")
 endif()
 
-if(VLLM_GPU_LANG STREQUAL "CUDA")
-  set(MOE_PERMUTE_SRC
-      "csrc/moe/permute_unpermute_kernels/moe_permute_unpermute_kernel.cu"
-      "csrc/moe/moe_permute_unpermute_op.cu")
-
-  list(APPEND VLLM_MOE_EXT_SRC "${MOE_PERMUTE_SRC}")
-endif()
-
 set_gencode_flags_for_srcs(
   SRCS "${VLLM_MOE_EXT_SRC}"
   CUDA_ARCHS "${CUDA_ARCHS}")
@@ -844,6 +836,17 @@ if(VLLM_GPU_LANG STREQUAL "CUDA")
   endif()
 endif()
 
+if(VLLM_GPU_LANG STREQUAL "CUDA")
+  set(MOE_PERMUTE_SRC
+      "csrc/moe/permute_unpermute_kernels/moe_permute_unpermute_kernel.cu"
+      "csrc/moe/moe_permute_unpermute_op.cu")
+
+  set_gencode_flags_for_srcs(
+    SRCS "${MARLIN_PERMUTE_SRC}"
+    CUDA_ARCHS "${MOE_PERMUTE_ARCHS}")
+
+  list(APPEND VLLM_MOE_EXT_SRC "${MOE_PERMUTE_SRC}")
+endif()
 message(STATUS "Enabling moe extension.")
 define_gpu_extension_target(
   _moe_C

benchmarks/README.md

@@ -98,7 +98,7 @@ Then run the benchmarking script
 ```bash
 # download dataset
 # wget https://huggingface.co/datasets/anon8231489123/ShareGPT_Vicuna_unfiltered/resolve/main/ShareGPT_V3_unfiltered_cleaned_split.json
-vllm bench serve \
+python3 vllm/benchmarks/benchmark_serving.py \
   --backend vllm \
   --model NousResearch/Hermes-3-Llama-3.1-8B \
   --endpoint /v1/completions \
@@ -111,25 +111,25 @@ If successful, you will see the following output
 
 ```
 ============ Serving Benchmark Result ============
-Successful requests:                     10
-Benchmark duration (s):                  5.78
-Total input tokens:                      1369
-Total generated tokens:                  2212
-Request throughput (req/s):              1.73
-Output token throughput (tok/s):         382.89
-Total Token throughput (tok/s):          619.85
+Successful requests:                     10        
+Benchmark duration (s):                  5.78      
+Total input tokens:                      1369      
+Total generated tokens:                  2212      
+Request throughput (req/s):              1.73      
+Output token throughput (tok/s):         382.89    
+Total Token throughput (tok/s):          619.85    
 ---------------Time to First Token----------------
-Mean TTFT (ms):                          71.54
-Median TTFT (ms):                        73.88
-P99 TTFT (ms):                           79.49
+Mean TTFT (ms):                          71.54     
+Median TTFT (ms):                        73.88     
+P99 TTFT (ms):                           79.49     
 -----Time per Output Token (excl. 1st token)------
-Mean TPOT (ms):                          7.91
-Median TPOT (ms):                        7.96
-P99 TPOT (ms):                           8.03
+Mean TPOT (ms):                          7.91      
+Median TPOT (ms):                        7.96      
+P99 TPOT (ms):                           8.03      
 ---------------Inter-token Latency----------------
-Mean ITL (ms):                           7.74
-Median ITL (ms):                         7.70
-P99 ITL (ms):                            8.39
+Mean ITL (ms):                           7.74      
+Median ITL (ms):                         7.70      
+P99 ITL (ms):                            8.39      
 ==================================================
 ```
 
@@ -141,7 +141,7 @@ If the dataset you want to benchmark is not supported yet in vLLM, even then you
 {"prompt": "What is the capital of India?"}
 {"prompt": "What is the capital of Iran?"}
 {"prompt": "What is the capital of China?"}
-```
+``` 
 
 ```bash
 # start server
@@ -150,7 +150,7 @@ VLLM_USE_V1=1 vllm serve meta-llama/Llama-3.1-8B-Instruct --disable-log-requests
 
 ```bash
 # run benchmarking script
-vllm bench serve --port 9001 --save-result --save-detailed \
+python3 benchmarks/benchmark_serving.py --port 9001 --save-result --save-detailed \
   --backend vllm \
   --model meta-llama/Llama-3.1-8B-Instruct \
   --endpoint /v1/completions \
@@ -174,7 +174,7 @@ vllm serve Qwen/Qwen2-VL-7B-Instruct --disable-log-requests
 ```
 
 ```bash
-vllm bench serve \
+python3 vllm/benchmarks/benchmark_serving.py \
   --backend openai-chat \
   --model Qwen/Qwen2-VL-7B-Instruct \
   --endpoint /v1/chat/completions \
@@ -194,7 +194,7 @@ VLLM_USE_V1=1 vllm serve meta-llama/Meta-Llama-3-8B-Instruct \
 ```
 
 ``` bash
-vllm bench serve \
+python3 benchmarks/benchmark_serving.py \
     --model meta-llama/Meta-Llama-3-8B-Instruct \
     --dataset-name hf \
     --dataset-path likaixin/InstructCoder \
@@ -210,7 +210,7 @@ vllm serve Qwen/Qwen2-VL-7B-Instruct --disable-log-requests
 **`lmms-lab/LLaVA-OneVision-Data`**
 
 ```bash
-vllm bench serve \
+python3 vllm/benchmarks/benchmark_serving.py \
   --backend openai-chat \
   --model Qwen/Qwen2-VL-7B-Instruct \
   --endpoint /v1/chat/completions \
@@ -224,7 +224,7 @@ vllm bench serve \
 **`Aeala/ShareGPT_Vicuna_unfiltered`**
 
 ```bash
-vllm bench serve \
+python3 vllm/benchmarks/benchmark_serving.py \
   --backend openai-chat \
   --model Qwen/Qwen2-VL-7B-Instruct \
   --endpoint /v1/chat/completions \
@@ -237,7 +237,7 @@ vllm bench serve \
 **`AI-MO/aimo-validation-aime`**
 
 ``` bash
-vllm bench serve \
+python3 vllm/benchmarks/benchmark_serving.py \
     --model Qwen/QwQ-32B \
     --dataset-name hf \
     --dataset-path AI-MO/aimo-validation-aime \
@@ -248,7 +248,7 @@ vllm bench serve \
 **`philschmid/mt-bench`**
 
 ``` bash
-vllm bench serve \
+python3 vllm/benchmarks/benchmark_serving.py \
     --model Qwen/QwQ-32B \
     --dataset-name hf \
     --dataset-path philschmid/mt-bench \
@@ -261,7 +261,7 @@ When using OpenAI-compatible backends such as `vllm`, optional sampling
 parameters can be specified. Example client command:
 
 ```bash
-vllm bench serve \
+python3 vllm/benchmarks/benchmark_serving.py \
   --backend vllm \
   --model NousResearch/Hermes-3-Llama-3.1-8B \
   --endpoint /v1/completions \
@@ -296,7 +296,7 @@ The following arguments can be used to control the ramp-up:
 <br/>
 
 ```bash
-vllm bench throughput \
+python3 vllm/benchmarks/benchmark_throughput.py \
   --model NousResearch/Hermes-3-Llama-3.1-8B \
   --dataset-name sonnet \
   --dataset-path vllm/benchmarks/sonnet.txt \
@@ -314,7 +314,7 @@ Total num output tokens:  1500
 **VisionArena Benchmark for Vision Language Models**
 
 ``` bash
-vllm bench throughput \
+python3 vllm/benchmarks/benchmark_throughput.py \
   --model Qwen/Qwen2-VL-7B-Instruct \
   --backend vllm-chat \
   --dataset-name hf \
@@ -336,7 +336,7 @@ Total num output tokens:  1280
 ``` bash
 VLLM_WORKER_MULTIPROC_METHOD=spawn \
 VLLM_USE_V1=1 \
-vllm bench throughput \
+python3 vllm/benchmarks/benchmark_throughput.py \
     --dataset-name=hf \
     --dataset-path=likaixin/InstructCoder \
     --model=meta-llama/Meta-Llama-3-8B-Instruct \
@@ -360,7 +360,7 @@ Total num output tokens:  204800
 **`lmms-lab/LLaVA-OneVision-Data`**
 
 ```bash
-vllm bench throughput \
+python3 vllm/benchmarks/benchmark_throughput.py \
   --model Qwen/Qwen2-VL-7B-Instruct \
   --backend vllm-chat \
   --dataset-name hf \
@@ -373,7 +373,7 @@ vllm bench throughput \
 **`Aeala/ShareGPT_Vicuna_unfiltered`**
 
 ```bash
-vllm bench throughput \
+python3 vllm/benchmarks/benchmark_throughput.py \
   --model Qwen/Qwen2-VL-7B-Instruct \
   --backend vllm-chat \
   --dataset-name hf \
@@ -385,7 +385,7 @@ vllm bench throughput \
 **`AI-MO/aimo-validation-aime`**
 
 ```bash
-vllm bench throughput \
+python3 benchmarks/benchmark_throughput.py \
   --model Qwen/QwQ-32B \
   --backend vllm \
   --dataset-name hf \
@@ -399,7 +399,7 @@ vllm bench throughput \
 ``` bash
 # download dataset
 # wget https://huggingface.co/datasets/anon8231489123/ShareGPT_Vicuna_unfiltered/resolve/main/ShareGPT_V3_unfiltered_cleaned_split.json
-vllm bench throughput \
+python3 vllm/benchmarks/benchmark_throughput.py \
   --model meta-llama/Llama-2-7b-hf \
   --backend vllm \
   --dataset_path <your data path>/ShareGPT_V3_unfiltered_cleaned_split.json \

benchmarks/auto_tune/README.md

@@ -39,7 +39,6 @@ You must set the following variables at the top of the script before execution.
 | `DOWNLOAD_DIR` | **Required.** Directory to download and load model weights from. | `""` (default download path) |
 | `INPUT_LEN` | **Required.** Request input length. | `4000` |
 | `OUTPUT_LEN` | **Required.** Request output length. | `16` |
-| `MAX_MODEL_LEN` | **Required.** Max model length. | `4096` |
 | `MIN_CACHE_HIT_PCT` | Prefix cache hit rate in percentage (0-100). Set to `0` to disable. | `60` |
 | `MAX_LATENCY_ALLOWED_MS` | The maximum allowed P99 end-to-end latency in milliseconds. Set to a very large number (e.g., `100000000000`) to effectively ignore the latency constraint. | `500` |
 | `NUM_SEQS_LIST` | A space-separated string of `max-num-seqs` values to test. | `"128 256"` |
@@ -70,7 +69,6 @@ Here are a few examples of how to configure the script for different goals:
 ```bash
 INPUT_LEN=1800
 OUTPUT_LEN=20
-MAX_MODEL_LEN=2048
 MIN_CACHE_HIT_PCT=0
 MAX_LATENCY_ALLOWED_MS=100000000000 # A very large number
 ```
@@ -82,7 +80,6 @@ MAX_LATENCY_ALLOWED_MS=100000000000 # A very large number
 ```bash
 INPUT_LEN=1800
 OUTPUT_LEN=20
-MAX_MODEL_LEN=2048
 MIN_CACHE_HIT_PCT=0
 MAX_LATENCY_ALLOWED_MS=500
 ```
@@ -94,7 +91,6 @@ MAX_LATENCY_ALLOWED_MS=500
 ```bash
 INPUT_LEN=1800
 OUTPUT_LEN=20
-MAX_MODEL_LEN=2048
 MIN_CACHE_HIT_PCT=60
 MAX_LATENCY_ALLOWED_MS=500
 ```
@@ -105,7 +101,7 @@ After the script finishes, you will find the results in a new, timestamped direc
 
 - **Log Files**: The directory (`$BASE/auto-benchmark/YYYY_MM_DD_HH_MM/`) contains detailed logs for each run:
     - `vllm_log_...txt`: The log output from the vLLM server for each parameter combination.
-    - `bm_log_...txt`: The log output from the `vllm bench serve` command for each benchmark run.
+    - `bm_log_...txt`: The log output from the `benchmark_serving.py` script for each benchmark run.
 
 - **Final Result Summary**: A file named `result.txt` is created in the log directory. It contains a summary of each tested combination and concludes with the overall best parameters found.
 

benchmarks/auto_tune/auto_tune.sh

@@ -1,18 +1,16 @@
 #!/bin/bash
 
-# This script aims to tune the best server parameter combinations to maximize throughput for given requirement.
+# This script aims to tune the best server parameter combinations to maximize throughput for given requirement. 
 # See details in README (benchmarks/auto_tune/README.md).
 
 TAG=$(date +"%Y_%m_%d_%H_%M")
-SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
-BASE="$SCRIPT_DIR/../../.."
+BASE=""
 MODEL="meta-llama/Llama-3.1-8B-Instruct"
 SYSTEM="TPU"
 TP=1
 DOWNLOAD_DIR=""
 INPUT_LEN=4000
 OUTPUT_LEN=16
-MAX_MODEL_LEN=4096
 MIN_CACHE_HIT_PCT=0
 MAX_LATENCY_ALLOWED_MS=100000000000
 NUM_SEQS_LIST="128 256"
@@ -38,13 +36,6 @@ current_hash=$(git rev-parse HEAD)
 echo "hash:$current_hash" >> "$RESULT"
 echo "current_hash: $current_hash"
 
-TOTAL_LEN=$((INPUT_LEN + OUTPUT_LEN))
-RED='\033[0;31m'
-if (( TOTAL_LEN > MAX_MODEL_LEN )); then
-    echo -e "${RED}FAILED: INPUT_LEN($INPUT_LEN) + OUTPUT_LEN($OUTPUT_LEN) = $TOTAL_LEN, which is > MAX_MODEL_LEN = $MAX_MODEL_LEN.\033[0m" >&2
-    exit 1
-fi
-
 best_throughput=0
 best_max_num_seqs=0
 best_num_batched_tokens=0
@@ -56,7 +47,7 @@ start_server() {
     local max_num_batched_tokens=$3
     local vllm_log=$4
     local profile_dir=$5
-
+    
     pkill -f vllm
 
     VLLM_USE_V1=1 VLLM_SERVER_DEV_MODE=1 VLLM_TORCH_PROFILER_DIR=$profile_dir vllm serve $MODEL \
@@ -69,13 +60,13 @@ start_server() {
         --enable-prefix-caching \
         --load-format dummy \
         --download-dir "$DOWNLOAD_DIR" \
-        --max-model-len $MAX_MODEL_LEN > "$vllm_log" 2>&1 &
+        --max-model-len $(( INPUT_LEN+OUTPUT_LEN )) > "$vllm_log" 2>&1 &
 
     # wait for 10 minutes...
     server_started=0
-    for i in {1..60}; do
+    for i in {1..60}; do  
         RESPONSE=$(curl -s -X GET "http://0.0.0.0:8004/health" -w "%{http_code}" -o /dev/stdout)
-        STATUS_CODE=$(echo "$RESPONSE" | tail -n 1)
+        STATUS_CODE=$(echo "$RESPONSE" | tail -n 1) 
         if [[ "$STATUS_CODE" -eq 200 ]]; then
             server_started=1
             break
@@ -98,10 +89,10 @@ update_best_profile() {
     selected_profile_file=
     if [[ "$SYSTEM" == "TPU" ]]; then
         selected_profile_file="${sorted_paths[$profile_index]}/*.xplane.pb"
-    fi
+    fi 
     if [[ "$SYSTEM" == "GPU" ]]; then
         selected_profile_file="${sorted_paths[$profile_index]}"
-    fi
+    fi 
     rm -f $PROFILE_PATH/*
     cp $selected_profile_file $PROFILE_PATH
 }
@@ -129,14 +120,14 @@ run_benchmark() {
         echo "server started."
     fi
     echo
-
+    
     echo "run benchmark test..."
     meet_latency_requirement=0
     # get a basic qps by using request-rate inf
     bm_log="$LOG_FOLDER/bm_log_${max_num_seqs}_${max_num_batched_tokens}_requestrate_inf.txt"
     prefix_len=$(( INPUT_LEN * MIN_CACHE_HIT_PCT / 100 ))
 adjusted_input_len=$(( INPUT_LEN - prefix_len ))
-    vllm bench serve \
+    python3 benchmarks/benchmark_serving.py \
         --backend vllm \
         --model $MODEL  \
         --dataset-name random \
@@ -169,7 +160,7 @@ adjusted_input_len=$(( INPUT_LEN - prefix_len ))
             curl -X POST http://0.0.0.0:8004/reset_prefix_cache
             sleep 5
             bm_log="$LOG_FOLDER/bm_log_${max_num_seqs}_${max_num_batched_tokens}_requestrate_${request_rate}.txt"
-            vllm bench serve \
+            python3 benchmarks/benchmark_serving.py \
                 --backend vllm \
                 --model $MODEL  \
                 --dataset-name random \
@@ -254,3 +245,4 @@ done
 echo "finish permutations"
 echo "best_max_num_seqs: $best_max_num_seqs, best_num_batched_tokens: $best_num_batched_tokens, best_throughput: $best_throughput, profile saved in: $PROFILE_PATH"
 echo "best_max_num_seqs: $best_max_num_seqs, best_num_batched_tokens: $best_num_batched_tokens, best_throughput: $best_throughput, profile saved in: $PROFILE_PATH" >> "$RESULT"
+

benchmarks/benchmark_latency.py

@@ -11,7 +11,6 @@ from typing import Any, Optional
 
 import numpy as np
 from tqdm import tqdm
-from typing_extensions import deprecated
 
 import vllm.envs as envs
 from benchmark_utils import convert_to_pytorch_benchmark_format, write_to_json
@@ -35,10 +34,6 @@ def save_to_pytorch_benchmark_format(
         write_to_json(pt_file, pt_records)
 
 
-@deprecated(
-    "benchmark_latency.py is deprecated and will be removed in a "
-    "future version. Please use 'vllm bench latency' instead.",
-)
 def main(args: argparse.Namespace):
     print(args)
 

benchmarks/benchmark_serving.py

@@ -38,7 +38,6 @@ from typing import Any, Literal, Optional
 import numpy as np
 from tqdm.asyncio import tqdm
 from transformers import PreTrainedTokenizerBase
-from typing_extensions import deprecated
 
 from backend_request_func import (
     ASYNC_REQUEST_FUNCS,
@@ -396,6 +395,20 @@ async def benchmark(
         tasks.append(asyncio.create_task(task))
     outputs: list[RequestFuncOutput] = await asyncio.gather(*tasks)
 
+    if profile:
+        print("Stopping profiler...")
+        profile_input = RequestFuncInput(
+            model=model_id,
+            prompt=test_prompt,
+            api_url=base_url + "/stop_profile",
+            prompt_len=test_prompt_len,
+            output_len=test_output_len,
+            logprobs=logprobs,
+        )
+        profile_output = await request_func(request_func_input=profile_input)
+        if profile_output.success:
+            print("Profiler stopped")
+
     if pbar is not None:
         pbar.close()
 
@@ -504,20 +517,6 @@ async def benchmark(
 
     print("=" * 50)
 
-    if profile:
-        print("Stopping profiler...")
-        profile_input = RequestFuncInput(
-            model=model_id,
-            prompt=test_prompt,
-            api_url=base_url + "/stop_profile",
-            prompt_len=test_prompt_len,
-            output_len=test_output_len,
-            logprobs=logprobs,
-        )
-        profile_output = await request_func(request_func_input=profile_input)
-        if profile_output.success:
-            print("Profiler stopped")
-
     return result
 
 
@@ -594,10 +593,6 @@ def save_to_pytorch_benchmark_format(
         write_to_json(pt_file, pt_records)
 
 
-@deprecated(
-    "benchmark_serving.py is deprecated and will be removed in a future "
-    "version. Please use 'vllm bench serve' instead.",
-)
 def main(args: argparse.Namespace):
     print(args)
     random.seed(args.seed)

benchmarks/benchmark_serving_structured_output.py

@@ -538,6 +538,20 @@ async def benchmark(
         )
     outputs: list[RequestFuncOutput] = await asyncio.gather(*tasks)
 
+    if profile:
+        print("Stopping profiler...")
+        profile_input = RequestFuncInput(
+            model=model_id,
+            prompt=test_request.prompt,
+            api_url=base_url + "/stop_profile",
+            prompt_len=test_request.prompt_len,
+            output_len=test_request.expected_output_len,
+            extra_body={test_request.structure_type: test_request.schema},
+        )
+        profile_output = await request_func(request_func_input=profile_input)
+        if profile_output.success:
+            print("Profiler stopped")
+
     if pbar is not None:
         pbar.close()
 
@@ -652,20 +666,6 @@ async def benchmark(
 
     print("=" * 50)
 
-    if profile:
-        print("Stopping profiler...")
-        profile_input = RequestFuncInput(
-            model=model_id,
-            prompt=test_request.prompt,
-            api_url=base_url + "/stop_profile",
-            prompt_len=test_request.prompt_len,
-            output_len=test_request.expected_output_len,
-            extra_body={test_request.structure_type: test_request.schema},
-        )
-        profile_output = await request_func(request_func_input=profile_input)
-        if profile_output.success:
-            print("Profiler stopped")
-
     return result, ret
 
 

benchmarks/benchmark_throughput.py

@@ -15,7 +15,6 @@ import torch
 import uvloop
 from tqdm import tqdm
 from transformers import AutoModelForCausalLM, AutoTokenizer, PreTrainedTokenizerBase
-from typing_extensions import deprecated
 
 from benchmark_dataset import (
     AIMODataset,
@@ -168,8 +167,7 @@ async def run_vllm_async(
     from vllm import SamplingParams
 
     async with build_async_engine_client_from_engine_args(
-        engine_args,
-        disable_frontend_multiprocessing=disable_frontend_multiprocessing,
+        engine_args, disable_frontend_multiprocessing
     ) as llm:
         model_config = await llm.get_model_config()
         assert all(
@@ -383,10 +381,6 @@ def get_requests(args, tokenizer):
     return dataset_cls(**common_kwargs).sample(**sample_kwargs)
 
 
-@deprecated(
-    "benchmark_throughput.py is deprecated and will be removed in a "
-    "future version. Please use 'vllm bench throughput' instead.",
-)
 def main(args: argparse.Namespace):
     if args.seed is None:
         args.seed = 0

benchmarks/disagg_benchmarks/disagg_overhead_benchmark.sh

@@ -3,7 +3,7 @@
 # benchmark the overhead of disaggregated prefill.
 # methodology:
 # - send all request to prefill vLLM instance. It will buffer KV cache.
-# - then send all request to decode instance.
+# - then send all request to decode instance. 
 # - The TTFT of decode instance is the overhead.
 
 set -ex
@@ -12,8 +12,6 @@ kill_gpu_processes() {
   # kill all processes on GPU.
   pgrep pt_main_thread | xargs -r kill -9
   pgrep python3 | xargs -r kill -9
-  # vLLM now names the process with VLLM prefix after https://github.com/vllm-project/vllm/pull/21445
-  pgrep VLLM | xargs -r kill -9
   sleep 10
 
   # remove vllm config file
@@ -63,7 +61,7 @@ benchmark() {
     --gpu-memory-utilization 0.6 \
     --kv-transfer-config \
     '{"kv_connector":"PyNcclConnector","kv_role":"kv_producer","kv_rank":0,"kv_parallel_size":2,"kv_buffer_size":5e9}' &
-
+    
 
   CUDA_VISIBLE_DEVICES=1 python3 \
     -m vllm.entrypoints.openai.api_server \
@@ -78,38 +76,38 @@ benchmark() {
   wait_for_server 8200
 
   # let the prefill instance finish prefill
-  vllm bench serve \
-    --backend vllm \
-    --model $model \
-    --dataset-name $dataset_name \
-    --dataset-path $dataset_path \
-    --sonnet-input-len $input_len \
-    --sonnet-output-len "$output_len" \
-    --sonnet-prefix-len $prefix_len \
-    --num-prompts $num_prompts \
-    --port 8100 \
-    --save-result \
-    --result-dir $results_folder \
-    --result-filename disagg_prefill_tp1.json \
-    --request-rate "inf"
+  python3 ../benchmark_serving.py \
+          --backend vllm \
+          --model $model \
+          --dataset-name $dataset_name \
+          --dataset-path $dataset_path \
+          --sonnet-input-len $input_len \
+          --sonnet-output-len "$output_len" \
+          --sonnet-prefix-len $prefix_len \
+          --num-prompts $num_prompts \
+          --port 8100 \
+          --save-result \
+          --result-dir $results_folder \
+          --result-filename disagg_prefill_tp1.json \
+          --request-rate "inf"
 
 
   # send the request to decode.
   # The TTFT of this command will be the overhead of disagg prefill impl.
-  vllm bench serve \
-    --backend vllm \
-    --model $model \
-    --dataset-name $dataset_name \
-    --dataset-path $dataset_path \
-    --sonnet-input-len $input_len \
-    --sonnet-output-len "$output_len" \
-    --sonnet-prefix-len $prefix_len \
-    --num-prompts $num_prompts \
-    --port 8200 \
-    --save-result \
-    --result-dir $results_folder \
-    --result-filename disagg_prefill_tp1_overhead.json \
-    --request-rate "$qps"
+  python3 ../benchmark_serving.py \
+          --backend vllm \
+          --model $model \
+          --dataset-name $dataset_name \
+          --dataset-path $dataset_path \
+          --sonnet-input-len $input_len \
+          --sonnet-output-len "$output_len" \
+          --sonnet-prefix-len $prefix_len \
+          --num-prompts $num_prompts \
+          --port 8200 \
+          --save-result \
+          --result-dir $results_folder \
+          --result-filename disagg_prefill_tp1_overhead.json \
+          --request-rate "$qps"
   kill_gpu_processes
 
 }

benchmarks/disagg_benchmarks/disagg_performance_benchmark.sh

@@ -18,8 +18,6 @@ kill_gpu_processes() {
   # kill all processes on GPU.
   pgrep pt_main_thread | xargs -r kill -9
   pgrep python3 | xargs -r kill -9
-  # vLLM now names the process with VLLM prefix after https://github.com/vllm-project/vllm/pull/21445
-  pgrep VLLM | xargs -r kill -9
   for port in 8000 8100 8200; do lsof -t -i:$port | xargs -r kill -9; done
   sleep 1
 }
@@ -60,7 +58,7 @@ launch_chunked_prefill() {
 
 
 launch_disagg_prefill() {
-  model="meta-llama/Meta-Llama-3.1-8B-Instruct"
+  model="meta-llama/Meta-Llama-3.1-8B-Instruct" 
   # disagg prefill
   CUDA_VISIBLE_DEVICES=0 python3 \
     -m vllm.entrypoints.openai.api_server \
@@ -99,20 +97,20 @@ benchmark() {
   output_len=$2
   tag=$3
 
-  vllm bench serve \
-    --backend vllm \
-    --model $model \
-    --dataset-name $dataset_name \
-    --dataset-path $dataset_path \
-    --sonnet-input-len $input_len \
-    --sonnet-output-len "$output_len" \
-    --sonnet-prefix-len $prefix_len \
-    --num-prompts $num_prompts \
-    --port 8000 \
-    --save-result \
-    --result-dir $results_folder \
-    --result-filename "$tag"-qps-"$qps".json \
-    --request-rate "$qps"
+  python3 ../benchmark_serving.py \
+          --backend vllm \
+          --model $model \
+          --dataset-name $dataset_name \
+          --dataset-path $dataset_path \
+          --sonnet-input-len $input_len \
+          --sonnet-output-len "$output_len" \
+          --sonnet-prefix-len $prefix_len \
+          --num-prompts $num_prompts \
+          --port 8000 \
+          --save-result \
+          --result-dir $results_folder \
+          --result-filename "$tag"-qps-"$qps".json \
+          --request-rate "$qps"
 
   sleep 2
 }

benchmarks/kernels/benchmark_moe_align_block_size.py

@@ -5,8 +5,9 @@ import itertools
 
 import torch
 
+from vllm import _custom_ops as ops
 from vllm.model_executor.layers.fused_moe.moe_align_block_size import (
-    moe_align_block_size,
+    moe_align_block_size_triton,
 )
 from vllm.triton_utils import triton
 
@@ -20,6 +21,60 @@ def get_topk_ids(num_tokens: int, num_experts: int, topk: int) -> torch.Tensor:
     )
 
 
+def check_correctness(num_tokens, num_experts=256, block_size=256, topk=8):
+    """
+    Verifies vllm vs. Triton
+    """
+    topk_ids = get_topk_ids(num_tokens, num_experts, topk)
+
+    # 1. malloc space for triton and vllm
+    # malloc enough space (max_num_tokens_padded) for the sorted ids
+    max_num_tokens_padded = topk_ids.numel() + num_experts * (block_size - 1)
+    sorted_ids_triton = torch.empty(
+        (max_num_tokens_padded,), dtype=torch.int32, device="cuda"
+    )
+    expert_ids_triton = torch.empty(
+        (max_num_tokens_padded // block_size,), dtype=torch.int32, device="cuda"
+    )
+    num_tokens_post_pad_triton = torch.empty((1,), dtype=torch.int32, device="cuda")
+
+    sorted_ids_vllm = torch.empty_like(sorted_ids_triton)
+    expert_ids_vllm = torch.empty_like(expert_ids_triton)
+    num_tokens_post_pad_vllm = torch.empty_like(num_tokens_post_pad_triton)
+
+    # 2. run implementations
+    moe_align_block_size_triton(
+        topk_ids,
+        num_experts,
+        block_size,
+        sorted_ids_triton,
+        expert_ids_triton,
+        num_tokens_post_pad_triton,
+    )
+
+    ops.moe_align_block_size(
+        topk_ids,
+        num_experts,
+        block_size,
+        sorted_ids_vllm,
+        expert_ids_vllm,
+        num_tokens_post_pad_vllm,
+    )
+    print(f"✅ VLLM implementation works with {num_experts} experts!")
+
+    # 3. compare results
+    if torch.allclose(expert_ids_triton, expert_ids_vllm) and torch.allclose(
+        num_tokens_post_pad_triton, num_tokens_post_pad_vllm
+    ):
+        print("✅ Triton and VLLM implementations match.")
+    else:
+        print("❌ Triton and VLLM implementations DO NOT match.")
+        print("Triton expert_ids:", expert_ids_triton)
+        print("VLLM expert_ids:", expert_ids_vllm)
+        print("Triton num_tokens_post_pad:", num_tokens_post_pad_triton)
+        print("VLLM num_tokens_post_pad:", num_tokens_post_pad_vllm)
+
+
 # test configurations
 num_tokens_range = [1, 16, 256, 4096]
 num_experts_range = [16, 64, 224, 256, 280, 512]
@@ -32,8 +87,8 @@ configs = list(itertools.product(num_tokens_range, num_experts_range, topk_range
         x_names=["num_tokens", "num_experts", "topk"],
         x_vals=configs,
         line_arg="provider",
-        line_vals=["vllm"],
-        line_names=["vLLM"],
+        line_vals=["vllm", "triton"],  # "triton"
+        line_names=["VLLM", "Triton"],  # "Triton"
         plot_name="moe-align-block-size-performance",
         args={},
     )
@@ -43,11 +98,36 @@ def benchmark(num_tokens, num_experts, topk, provider):
     block_size = 256
     topk_ids = get_topk_ids(num_tokens, num_experts, topk)
 
+    max_num_tokens_padded = topk_ids.numel() + num_experts * (block_size - 1)
+    sorted_ids = torch.empty((max_num_tokens_padded,), dtype=torch.int32, device="cuda")
+    max_num_m_blocks = max_num_tokens_padded // block_size
+    expert_ids = torch.empty((max_num_m_blocks,), dtype=torch.int32, device="cuda")
+    num_tokens_post_pad = torch.empty((1,), dtype=torch.int32, device="cuda")
+
     quantiles = [0.5, 0.2, 0.8]
 
     if provider == "vllm":
         ms, min_ms, max_ms = triton.testing.do_bench(
-            lambda: moe_align_block_size(topk_ids, block_size, num_experts),
+            lambda: ops.moe_align_block_size(
+                topk_ids,
+                num_experts,
+                block_size,
+                sorted_ids.clone(),
+                expert_ids.clone(),
+                num_tokens_post_pad.clone(),
+            ),
+            quantiles=quantiles,
+        )
+    elif provider == "triton":
+        ms, min_ms, max_ms = triton.testing.do_bench(
+            lambda: moe_align_block_size_triton(
+                topk_ids,
+                num_experts,
+                block_size,
+                sorted_ids.clone(),
+                expert_ids.clone(),
+                num_tokens_post_pad.clone(),
+            ),
             quantiles=quantiles,
         )
 
@@ -71,4 +151,6 @@ if __name__ == "__main__":
     )
     args = parser.parse_args()
 
+    print("Running correctness check...")
+    check_correctness(num_tokens=1024, num_experts=args.num_experts, topk=args.topk)
     benchmark.run(print_data=True, show_plots=True)

benchmarks/kernels/benchmark_moe_permute_unpermute.py

@@ -8,13 +8,12 @@ import ray
 import torch
 from transformers import AutoConfig
 
-from vllm.model_executor.layers.fused_moe.fused_moe import *
-from vllm.model_executor.layers.fused_moe.moe_permute_unpermute import (
+from vllm.model_executor.layers.fused_moe.deep_gemm_moe import (
     _moe_permute,
     _moe_unpermute_and_reduce,
-    moe_permute,
-    moe_unpermute,
 )
+from vllm.model_executor.layers.fused_moe.fused_moe import *
+from vllm.model_executor.layers.fused_moe.moe_permute_unpermute import *
 from vllm.model_executor.layers.fused_moe.utils import _fp8_quantize
 from vllm.platforms import current_platform
 from vllm.utils import FlexibleArgumentParser
@@ -64,19 +63,18 @@ def benchmark_permute(
 
     def run():
         if use_customized_permute:
-            (
-                permuted_hidden_states,
-                a1q_scale,
-                first_token_off,
-                inv_perm_idx,
-                m_indices,
-            ) = moe_permute(
-                qhidden_states,
-                a1q_scale=None,
-                topk_ids=topk_ids,
-                n_expert=num_experts,
-                expert_map=None,
-                align_block_size=align_block_size,
+            (permuted_hidden_states, first_token_off, inv_perm_idx, m_indices) = (
+                moe_permute(
+                    qhidden_states,
+                    topk_weights=topk_weights,
+                    topk_ids=topk_ids,
+                    token_expert_indices=token_expert_indices,
+                    topk=topk,
+                    n_expert=num_experts,
+                    n_local_expert=num_experts,
+                    expert_map=None,
+                    align_block_size=align_block_size,
+                )
             )
         else:
             (
@@ -152,19 +150,18 @@ def benchmark_unpermute(
 
     def prepare():
         if use_customized_permute:
-            (
-                permuted_hidden_states,
-                a1q_scale,
-                first_token_off,
-                inv_perm_idx,
-                m_indices,
-            ) = moe_permute(
-                qhidden_states,
-                a1q_scale=None,
-                topk_ids=topk_ids,
-                n_expert=num_experts,
-                expert_map=None,
-                align_block_size=align_block_size,
+            (permuted_hidden_states, first_token_off, inv_perm_idx, m_indices) = (
+                moe_permute(
+                    qhidden_states,
+                    topk_weights=topk_weights,
+                    topk_ids=topk_ids,
+                    token_expert_indices=token_expert_indices,
+                    topk=topk,
+                    n_expert=num_experts,
+                    n_local_expert=num_experts,
+                    expert_map=None,
+                    align_block_size=align_block_size,
+                )
             )
             # convert to fp16/bf16 as gemm output
             return (
@@ -194,19 +191,16 @@ def benchmark_unpermute(
 
     def run(input: tuple):
         if use_customized_permute:
-            (
-                permuted_hidden_states,
-                first_token_off,
-                inv_perm_idx,
-                m_indices,
-            ) = input
-            output = torch.empty_like(hidden_states)
+            (permuted_hidden_states, first_token_off, inv_perm_idx, m_indices) = input
             moe_unpermute(
-                output,
                 permuted_hidden_states,
                 topk_weights,
+                topk_ids,
                 inv_perm_idx,
                 first_token_off,
+                topk,
+                num_experts,
+                num_experts,
             )
         else:
             (
@@ -217,11 +211,7 @@ def benchmark_unpermute(
                 inv_perm,
             ) = input
             _moe_unpermute_and_reduce(
-                output_hidden_states,
-                permuted_hidden_states,
-                inv_perm,
-                topk_weights,
-                True,
+                output_hidden_states, permuted_hidden_states, inv_perm, topk_weights
             )
 
     # JIT compilation & warmup

cmake/cpu_extension.cmake

@@ -58,22 +58,6 @@ function (find_isa CPUINFO TARGET OUT)
     endif()
 endfunction()
 
-
-function(check_sysctl TARGET OUT)
-    execute_process(COMMAND sysctl -n "${TARGET}"
-                    RESULT_VARIABLE SYSCTL_RET
-                    OUTPUT_VARIABLE SYSCTL_INFO
-                    ERROR_QUIET
-                    OUTPUT_STRIP_TRAILING_WHITESPACE)
-    if(SYSCTL_RET EQUAL 0 AND
-      (SYSCTL_INFO STREQUAL "1" OR SYSCTL_INFO GREATER 0))
-        set(${OUT} ON PARENT_SCOPE)
-    else()
-        set(${OUT} OFF PARENT_SCOPE)
-    endif()
-endfunction()
-
-
 function (is_avx512_disabled OUT)
     set(DISABLE_AVX512 $ENV{VLLM_CPU_DISABLE_AVX512})
     if(DISABLE_AVX512 AND DISABLE_AVX512 STREQUAL "true")
@@ -86,10 +70,7 @@ endfunction()
 is_avx512_disabled(AVX512_DISABLED)
 
 if (MACOSX_FOUND AND CMAKE_SYSTEM_PROCESSOR STREQUAL "arm64")
-    message(STATUS "Apple Silicon Detected")
-    set(ENABLE_NUMA OFF)
-    check_sysctl(hw.optional.neon ASIMD_FOUND)
-    check_sysctl(hw.optional.arm.FEAT_BF16 ARM_BF16_FOUND)
+    set(APPLE_SILICON_FOUND TRUE)
 else()
     find_isa(${CPUINFO} "avx2" AVX2_FOUND)
     find_isa(${CPUINFO} "avx512f" AVX512_FOUND)
@@ -101,6 +82,7 @@ else()
     find_isa(${CPUINFO} "S390" S390_FOUND)
 endif()
 
+
 if (AVX512_FOUND AND NOT AVX512_DISABLED)
     list(APPEND CXX_COMPILE_FLAGS
         "-mavx512f"
@@ -167,6 +149,9 @@ elseif (ASIMD_FOUND)
         set(MARCH_FLAGS "-march=armv8.2-a+dotprod+fp16")  
     endif()
     list(APPEND CXX_COMPILE_FLAGS ${MARCH_FLAGS})     
+elseif(APPLE_SILICON_FOUND)
+    message(STATUS "Apple Silicon Detected")
+    set(ENABLE_NUMA OFF)
 elseif (S390_FOUND)
     message(STATUS "S390 detected")
     # Check for S390 VXE support

csrc/attention/attention_kernels.cuh

@@ -24,7 +24,7 @@
 
 #include "attention_dtypes.h"
 #include "attention_utils.cuh"
-#include "../cuda_compat.h"
+#include "cuda_compat.h"
 
 #ifdef USE_ROCM
   #include <hip/hip_bf16.h>

csrc/attention/paged_attention_v1.cu

@@ -16,8 +16,9 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
+
 #include "attention_kernels.cuh"
-#include "../cuda_compat.h"
+#include "cuda_compat.h"
 
 #define MAX(a, b) ((a) > (b) ? (a) : (b))
 #define MIN(a, b) ((a) < (b) ? (a) : (b))
@@ -74,7 +75,7 @@ void paged_attention_v1_launcher(
   const float* k_scale_ptr = reinterpret_cast<const float*>(k_scale.data_ptr());
   const float* v_scale_ptr = reinterpret_cast<const float*>(v_scale.data_ptr());
 
-  const int NUM_WARPS = NUM_THREADS / WARP_SIZE;
+  constexpr int NUM_WARPS = NUM_THREADS / WARP_SIZE;
   int padded_max_seq_len =
       DIVIDE_ROUND_UP(max_seq_len, BLOCK_SIZE) * BLOCK_SIZE;
   int logits_size = padded_max_seq_len * sizeof(float);

csrc/attention/paged_attention_v2.cu

@@ -16,8 +16,9 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
+
 #include "attention_kernels.cuh"
-#include "../cuda_compat.h"
+#include "cuda_compat.h"
 
 #define MAX(a, b) ((a) > (b) ? (a) : (b))
 #define MIN(a, b) ((a) < (b) ? (a) : (b))
@@ -78,7 +79,7 @@ void paged_attention_v2_launcher(
   const float* k_scale_ptr = reinterpret_cast<const float*>(k_scale.data_ptr());
   const float* v_scale_ptr = reinterpret_cast<const float*>(v_scale.data_ptr());
 
-  const int NUM_WARPS = NUM_THREADS / WARP_SIZE;
+  constexpr int NUM_WARPS = NUM_THREADS / WARP_SIZE;
   int max_num_partitions = DIVIDE_ROUND_UP(max_seq_len, PARTITION_SIZE);
   int logits_size = PARTITION_SIZE * sizeof(float);
   int outputs_size = (NUM_WARPS / 2) * head_size * sizeof(float);

csrc/cpu/torch_bindings.cpp

@@ -151,7 +151,7 @@ TORCH_LIBRARY_EXPAND(TORCH_EXTENSION_NAME, ops) {
   ops.impl("rotary_embedding", torch::kCPU, &rotary_embedding);
 
   // Quantization
-#if defined(__AVX512F__) || (defined(__aarch64__) && !defined(__APPLE__))
+#if defined(__AVX512F__) || defined(__aarch64__)
   at::Tag stride_tag = at::Tag::needs_fixed_stride_order;
 
   // Compute int8 quantized tensor for given scaling factor.

csrc/cuda_compat.h

@@ -4,35 +4,8 @@
   #include <hip/hip_runtime.h>
 #endif
 
-#ifdef USE_ROCM
-struct Utils {
-  static __host__ int get_warp_size() {
-    static bool is_cached = false;
-    static int result;
-
-    if (!is_cached) {
-      int device_id;
-      cudaDeviceProp deviceProp;
-      cudaGetDevice(&device_id);
-      cudaGetDeviceProperties(&deviceProp, device_id);
-
-      result = deviceProp.warpSize;
-      is_cached = true;
-    }
-
-    return result;
-  }
-
-  static __device__ constexpr int get_warp_size() {
-  #ifdef __GFX9__
-    return 64;
-  #else
-    return 32;
-  #endif
-  }
-};
-
-  #define WARP_SIZE Utils::get_warp_size()
+#if defined(USE_ROCM) && defined(__GFX9__)
+  #define WARP_SIZE 64
 #else
   #define WARP_SIZE 32
 #endif

csrc/moe/moe_permute_unpermute_op.cu

@@ -10,28 +10,32 @@
 
 void moe_permute(
     const torch::Tensor& input,                      // [n_token, hidden]
-    const torch::Tensor& topk_ids,                   // [n_token, topk]
+    const torch::Tensor& topk_weights,               //[n_token, topk]
+    torch::Tensor& topk_ids,                         // [n_token, topk]
     const torch::Tensor& token_expert_indices,       // [n_token, topk]
     const std::optional<torch::Tensor>& expert_map,  // [n_expert]
     int64_t n_expert, int64_t n_local_expert, int64_t topk,
     const std::optional<int64_t>& align_block_size,
-    torch::Tensor& permuted_input,             // [permuted_size, hidden]
+    torch::Tensor&
+        permuted_input,  // [topk * n_token/align_block_size_m, hidden]
     torch::Tensor& expert_first_token_offset,  // [n_local_expert + 1]
-    torch::Tensor& inv_permuted_idx,           // [n_token, topk]
-    torch::Tensor& permuted_idx,               // [permute_size]
+    torch::Tensor& src_row_id2dst_row_id_map,  // [n_token, topk]
     torch::Tensor& m_indices) {                // [align_expand_m]
+  TORCH_CHECK(topk_weights.scalar_type() == at::ScalarType::Float,
+              "topk_weights must be float32");
   TORCH_CHECK(expert_first_token_offset.scalar_type() == at::ScalarType::Long,
               "expert_first_token_offset must be int64");
   TORCH_CHECK(topk_ids.scalar_type() == at::ScalarType::Int,
               "topk_ids must be int32");
   TORCH_CHECK(token_expert_indices.scalar_type() == at::ScalarType::Int,
               "token_expert_indices must be int32");
-  TORCH_CHECK(inv_permuted_idx.scalar_type() == at::ScalarType::Int,
-              "inv_permuted_idx must be int32");
+  TORCH_CHECK(src_row_id2dst_row_id_map.scalar_type() == at::ScalarType::Int,
+              "src_row_id2dst_row_id_map must be int32");
   TORCH_CHECK(expert_first_token_offset.size(0) == n_local_expert + 1,
               "expert_first_token_offset shape != n_local_expert+1")
-  TORCH_CHECK(inv_permuted_idx.sizes() == token_expert_indices.sizes(),
-              "token_expert_indices shape must be same as inv_permuted_idx");
+  TORCH_CHECK(
+      src_row_id2dst_row_id_map.sizes() == token_expert_indices.sizes(),
+      "token_expert_indices shape must be same as src_row_id2dst_row_id_map");
   auto n_token = input.sizes()[0];
   auto n_hidden = input.sizes()[1];
   auto align_block_size_value =
@@ -42,9 +46,8 @@ void moe_permute(
   auto sort_workspace = torch::empty(
       {sorter_size},
       torch::dtype(torch::kInt8).device(torch::kCUDA).requires_grad(false));
-  auto copy_topk_ids = topk_ids.clone();  // copy topk_ids for preprocess
   auto permuted_experts_id = torch::empty_like(topk_ids);
-  auto sorted_row_idx = torch::empty_like(inv_permuted_idx);
+  auto dst_row_id2src_row_id_map = torch::empty_like(src_row_id2dst_row_id_map);
   auto align_expert_first_token_offset =
       torch::zeros_like(expert_first_token_offset);
 
@@ -64,22 +67,24 @@ void moe_permute(
     const int* expert_map_ptr = get_ptr<int>(expert_map.value());
     valid_num_ptr =
         get_ptr<int64_t>(expert_first_token_offset) + n_local_expert;
-    preprocessTopkIdLauncher(get_ptr<int>(copy_topk_ids), n_token * topk,
+    preprocessTopkIdLauncher(get_ptr<int>(topk_ids), n_token * topk,
                              expert_map_ptr, n_expert, stream);
   }
   // expert sort topk expert id and scan expert id get expert_first_token_offset
-  sortAndScanExpert(
-      get_ptr<int>(copy_topk_ids), get_ptr<int>(token_expert_indices),
-      get_ptr<int>(permuted_experts_id), get_ptr<int>(sorted_row_idx),
-      get_ptr<int64_t>(expert_first_token_offset), n_token, n_expert,
-      n_local_expert, topk, sorter, get_ptr<int>(sort_workspace), stream);
+  sortAndScanExpert(get_ptr<int>(topk_ids), get_ptr<int>(token_expert_indices),
+                    get_ptr<int>(permuted_experts_id),
+                    get_ptr<int>(dst_row_id2src_row_id_map),
+                    get_ptr<int64_t>(expert_first_token_offset), n_token,
+                    n_expert, n_local_expert, topk, sorter,
+                    get_ptr<int>(sort_workspace), stream);
 
   // dispatch expandInputRowsKernelLauncher
   MOE_DISPATCH(input.scalar_type(), [&] {
     expandInputRowsKernelLauncher<scalar_t>(
         get_ptr<scalar_t>(input), get_ptr<scalar_t>(permuted_input),
-        get_ptr<int>(permuted_experts_id), get_ptr<int>(sorted_row_idx),
-        get_ptr<int>(inv_permuted_idx), get_ptr<int>(permuted_idx),
+        get_ptr<float>(topk_weights), get_ptr<int>(permuted_experts_id),
+        get_ptr<int>(dst_row_id2src_row_id_map),
+        get_ptr<int>(src_row_id2dst_row_id_map),
         get_ptr<int64_t>(expert_first_token_offset), n_token, valid_num_ptr,
         n_hidden, topk, n_local_expert, align_block_size_value, stream);
   });
@@ -96,34 +101,32 @@ void moe_permute(
 }
 
 void moe_unpermute(
-    const torch::Tensor& permuted_hidden_states,  // [n_token * topk, hidden]
-    const torch::Tensor& topk_weights,            // [n_token, topk]
-    const torch::Tensor& inv_permuted_idx,        // [n_token, topk]
-    const std::optional<torch::Tensor>&
-        expert_first_token_offset,  // [n_local_expert+1]
-    int64_t topk,
+    const torch::Tensor& permuted_hidden_states,     // [n_token * topk, hidden]
+    const torch::Tensor& topk_weights,               //[n_token, topk]
+    const torch::Tensor& topk_ids,                   // [n_token, topk]
+    const torch::Tensor& src_row_id2dst_row_id_map,  // [n_token, topk]
+    const torch::Tensor& expert_first_token_offset,  // [n_local_expert+1]
+    int64_t n_expert, int64_t n_local_expert, int64_t topk,
     torch::Tensor& hidden_states  // [n_token, hidden]
 ) {
+  TORCH_CHECK(src_row_id2dst_row_id_map.sizes() == topk_ids.sizes(),
+              "topk_ids shape must be same as src_row_id2dst_row_id_map");
+  TORCH_CHECK(topk_ids.scalar_type() == at::ScalarType::Int,
+              "topk_ids must be int32");
   TORCH_CHECK(
       permuted_hidden_states.scalar_type() == hidden_states.scalar_type(),
-      "permuted_hidden_states dtype must be same as hidden_states");
+      "topk_ids dtype must be same as src_row_id2dst_row_id_map");
   auto n_token = hidden_states.size(0);
   auto n_hidden = hidden_states.size(1);
   auto stream = at::cuda::getCurrentCUDAStream().stream();
-
-  int64_t const* valid_ptr = nullptr;
-  if (expert_first_token_offset.has_value()) {
-    int n_local_expert = expert_first_token_offset.value().size(0) - 1;
-    valid_ptr =
-        get_ptr<int64_t>(expert_first_token_offset.value()) + n_local_expert;
-  }
-
+  const int64_t* valid_ptr =
+      get_ptr<int64_t>(expert_first_token_offset) + n_local_expert;
   MOE_DISPATCH(hidden_states.scalar_type(), [&] {
     finalizeMoeRoutingKernelLauncher<scalar_t, scalar_t>(
         get_ptr<scalar_t>(permuted_hidden_states),
         get_ptr<scalar_t>(hidden_states), get_ptr<float>(topk_weights),
-        get_ptr<int>(inv_permuted_idx), n_token, n_hidden, topk, valid_ptr,
-        stream);
+        get_ptr<int>(src_row_id2dst_row_id_map), get_ptr<int>(topk_ids),
+        n_token, n_hidden, topk, valid_ptr, stream);
   });
 }
 

csrc/moe/permute_unpermute_kernels/moe_permute_unpermute_kernel.cu

@@ -177,7 +177,7 @@ __global__ void getMIndicesKernel(int64_t* expert_first_token_offset,
   int tidx = threadIdx.x;
   extern __shared__ int64_t smem_expert_first_token_offset[];
   for (int i = tidx; i <= num_local_expert; i += blockDim.x) {
-    smem_expert_first_token_offset[i] = __ldg(expert_first_token_offset + i);
+    smem_expert_first_token_offset[tidx] = __ldg(expert_first_token_offset + i);
   }
   __syncthreads();
   auto last_token_offset = smem_expert_first_token_offset[eidx + 1];

csrc/moe/permute_unpermute_kernels/moe_permute_unpermute_kernel.h

@@ -57,19 +57,31 @@ void sortAndScanExpert(int* expert_for_source_row, const int* source_rows,
 
 template <typename T>
 void expandInputRowsKernelLauncher(
-    T const* unpermuted_input, T* permuted_output, int* sorted_experts,
+    T const* unpermuted_input, T* permuted_output,
+    const float* unpermuted_scales, int* sorted_experts,
     int const* expanded_dest_row_to_expanded_source_row,
-    int* expanded_source_row_to_expanded_dest_row, int* permuted_idx,
+    int* expanded_source_row_to_expanded_dest_row,
     int64_t* expert_first_token_offset, int64_t const num_rows,
     int64_t const* num_valid_tokens_ptr, int64_t const cols, int const k,
     int num_local_experts, const int& align_block_size, cudaStream_t stream);
 
+// Final kernel to unpermute and scale
+// This kernel unpermutes the original data, does the k-way reduction and
+// performs the final skip connection.
+template <typename T, typename OutputType, bool CHECK_SKIPPED>
+__global__ void finalizeMoeRoutingKernel(
+    T const* expanded_permuted_rows, OutputType* reduced_unpermuted_output,
+    float const* scales, int const* expanded_source_row_to_expanded_dest_row,
+    int const* expert_for_source_row, int64_t const orig_cols, int64_t const k,
+    int64_t const* num_valid_ptr);
+
 template <class T, class OutputType>
 void finalizeMoeRoutingKernelLauncher(
     T const* expanded_permuted_rows, OutputType* reduced_unpermuted_output,
     float const* scales, int const* expanded_source_row_to_expanded_dest_row,
-    int64_t const num_rows, int64_t const cols, int64_t const k,
-    int64_t const* num_valid_ptr, cudaStream_t stream);
+    int const* expert_for_source_row, int64_t const num_rows,
+    int64_t const cols, int64_t const k, int64_t const* num_valid_ptr,
+    cudaStream_t stream);
 
 void preprocessTopkIdLauncher(int* topk_id_ptr, int size,
                               const int* expert_map_ptr, int num_experts,

csrc/moe/permute_unpermute_kernels/moe_permute_unpermute_kernel.inl

@@ -2,9 +2,10 @@
 
 template <typename T, bool CHECK_SKIPPED, bool ALIGN_BLOCK_SIZE>
 __global__ void expandInputRowsKernel(
-    T const* unpermuted_input, T* permuted_output, int* sorted_experts,
+    T const* unpermuted_input, T* permuted_output,
+    const float* unpermuted_scales, int* sorted_experts,
     int const* expanded_dest_row_to_expanded_source_row,
-    int* expanded_source_row_to_expanded_dest_row, int* permuted_idx,
+    int* expanded_source_row_to_expanded_dest_row,
     int64_t* expert_first_token_offset, int64_t const num_rows,
     int64_t const* num_dest_rows, int64_t const cols, int64_t k,
     int num_local_experts, int align_block_size) {
@@ -53,10 +54,6 @@ __global__ void expandInputRowsKernel(
     assert(expanded_dest_row <= INT32_MAX);
     expanded_source_row_to_expanded_dest_row[expanded_source_row] =
         static_cast<int>(expanded_dest_row);
-    // skip non local expert token
-    if (!CHECK_SKIPPED || blockIdx.x < *num_dest_rows) {
-      permuted_idx[expanded_dest_row] = expanded_source_row;
-    }
   }
 
   if (!CHECK_SKIPPED || blockIdx.x < *num_dest_rows) {
@@ -65,7 +62,7 @@ __global__ void expandInputRowsKernel(
     using DataElem = cutlass::Array<T, ELEM_PER_THREAD>;
 
     // Duplicate and permute rows
-    int64_t const source_row = expanded_source_row / k;
+    int64_t const source_row = expanded_source_row % num_rows;
 
     auto const* source_row_ptr =
         reinterpret_cast<DataElem const*>(unpermuted_input + source_row * cols);
@@ -85,9 +82,10 @@ __global__ void expandInputRowsKernel(
 
 template <typename T>
 void expandInputRowsKernelLauncher(
-    T const* unpermuted_input, T* permuted_output, int* sorted_experts,
+    T const* unpermuted_input, T* permuted_output,
+    const float* unpermuted_scales, int* sorted_experts,
     int const* expanded_dest_row_to_expanded_source_row,
-    int* expanded_source_row_to_expanded_dest_row, int* permuted_idx,
+    int* expanded_source_row_to_expanded_dest_row,
     int64_t* expert_first_token_offset, int64_t const num_rows,
     int64_t const* num_valid_tokens_ptr, int64_t const cols, int const k,
     int num_local_experts, const int& align_block_size, cudaStream_t stream) {
@@ -107,11 +105,11 @@ void expandInputRowsKernelLauncher(
   int64_t smem_size = sizeof(int64_t) * (num_local_experts + 1);
 
   func<<<blocks, threads, smem_size, stream>>>(
-      unpermuted_input, permuted_output, sorted_experts,
+      unpermuted_input, permuted_output, unpermuted_scales, sorted_experts,
       expanded_dest_row_to_expanded_source_row,
-      expanded_source_row_to_expanded_dest_row, permuted_idx,
-      expert_first_token_offset, num_rows, num_valid_tokens_ptr, cols, k,
-      num_local_experts, align_block_size);
+      expanded_source_row_to_expanded_dest_row, expert_first_token_offset,
+      num_rows, num_valid_tokens_ptr, cols, k, num_local_experts,
+      align_block_size);
 }
 
 template <class T, class U>
@@ -130,9 +128,11 @@ template <typename T, typename OutputType, bool CHECK_SKIPPED>
 __global__ void finalizeMoeRoutingKernel(
     T const* expanded_permuted_rows, OutputType* reduced_unpermuted_output,
     float const* scales, int const* expanded_source_row_to_expanded_dest_row,
-    int64_t const orig_cols, int64_t const k, int64_t const* num_valid_ptr) {
+    int const* expert_for_source_row, int64_t const orig_cols, int64_t const k,
+    int64_t const* num_valid_ptr) {
   assert(orig_cols % 4 == 0);
   int64_t const original_row = blockIdx.x;
+  int64_t const num_rows = gridDim.x;
   auto const offset = original_row * orig_cols;
   OutputType* reduced_row_ptr = reduced_unpermuted_output + offset;
   int64_t const num_valid = *num_valid_ptr;
@@ -159,13 +159,14 @@ __global__ void finalizeMoeRoutingKernel(
     ComputeElem thread_output;
     thread_output.fill(0);
     for (int k_idx = 0; k_idx < k; ++k_idx) {
-      int64_t const expanded_original_row = original_row * k + k_idx;
+      int64_t const expanded_original_row = original_row + k_idx * num_rows;
       int64_t const expanded_permuted_row =
           expanded_source_row_to_expanded_dest_row[expanded_original_row];
 
       int64_t const k_offset = original_row * k + k_idx;
       float const row_scale = scales[k_offset];
 
+      // Check after row_rescale has accumulated
       if (CHECK_SKIPPED && expanded_permuted_row >= num_valid) {
         continue;
       }
@@ -188,8 +189,9 @@ template <class T, class OutputType>
 void finalizeMoeRoutingKernelLauncher(
     T const* expanded_permuted_rows, OutputType* reduced_unpermuted_output,
     float const* scales, int const* expanded_source_row_to_expanded_dest_row,
-    int64_t const num_rows, int64_t const cols, int64_t const k,
-    int64_t const* num_valid_ptr, cudaStream_t stream) {
+    int const* expert_for_source_row, int64_t const num_rows,
+    int64_t const cols, int64_t const k, int64_t const* num_valid_ptr,
+    cudaStream_t stream) {
   int64_t const blocks = num_rows;
   int64_t const threads = 256;
   bool const check_finished = num_valid_ptr != nullptr;
@@ -199,5 +201,6 @@ void finalizeMoeRoutingKernelLauncher(
   auto* const kernel = func_map[check_finished];
   kernel<<<blocks, threads, 0, stream>>>(
       expanded_permuted_rows, reduced_unpermuted_output, scales,
-      expanded_source_row_to_expanded_dest_row, cols, k, num_valid_ptr);
+      expanded_source_row_to_expanded_dest_row, expert_for_source_row, cols, k,
+      num_valid_ptr);
 }

csrc/moe/topk_softmax_kernels.cu

@@ -190,8 +190,8 @@ __launch_bounds__(TPB) __global__ void moeTopK(
   2) This implementation assumes k is small, but will work for any k.
 */
 
-template <int VPT, int NUM_EXPERTS, int WARPS_PER_CTA, int BYTES_PER_LDG, int WARP_SIZE_PARAM, typename IndType>
-__launch_bounds__(WARPS_PER_CTA* WARP_SIZE_PARAM) __global__
+template <int VPT, int NUM_EXPERTS, int WARPS_PER_CTA, int BYTES_PER_LDG, typename IndType>
+__launch_bounds__(WARPS_PER_CTA* WARP_SIZE) __global__
     void topkGatingSoftmax(const float* input, const bool* finished, float* output, const int num_rows, IndType* indices,
         int* source_rows, const int k, const int start_expert, const int end_expert)
 {
@@ -209,12 +209,12 @@ __launch_bounds__(WARPS_PER_CTA* WARP_SIZE_PARAM) __global__
 
     // Restrictions based on previous section.
     static_assert(VPT % ELTS_PER_LDG == 0, "The elements per thread must be a multiple of the elements per ldg");
-    static_assert(WARP_SIZE_PARAM % THREADS_PER_ROW == 0, "The threads per row must cleanly divide the threads per warp");
+    static_assert(WARP_SIZE % THREADS_PER_ROW == 0, "The threads per row must cleanly divide the threads per warp");
     static_assert(THREADS_PER_ROW == (THREADS_PER_ROW & -THREADS_PER_ROW), "THREADS_PER_ROW must be power of 2");
-    static_assert(THREADS_PER_ROW <= WARP_SIZE_PARAM, "THREADS_PER_ROW can be at most warp size");
+    static_assert(THREADS_PER_ROW <= WARP_SIZE, "THREADS_PER_ROW can be at most warp size");
 
     // We have NUM_EXPERTS elements per row. We specialize for small #experts
-    static constexpr int ELTS_PER_WARP = WARP_SIZE_PARAM * VPT;
+    static constexpr int ELTS_PER_WARP = WARP_SIZE * VPT;
     static constexpr int ROWS_PER_WARP = ELTS_PER_WARP / ELTS_PER_ROW;
     static constexpr int ROWS_PER_CTA = WARPS_PER_CTA * ROWS_PER_WARP;
 
@@ -393,51 +393,41 @@ __launch_bounds__(WARPS_PER_CTA* WARP_SIZE_PARAM) __global__
 namespace detail
 {
 // Constructs some constants needed to partition the work across threads at compile time.
-template <int EXPERTS, int BYTES_PER_LDG, int WARP_SIZE_PARAM>
+template <int EXPERTS, int BYTES_PER_LDG>
 struct TopkConstants
 {
     static constexpr int ELTS_PER_LDG = BYTES_PER_LDG / sizeof(float);
-    static_assert(EXPERTS / (ELTS_PER_LDG * WARP_SIZE_PARAM) == 0 || EXPERTS % (ELTS_PER_LDG * WARP_SIZE_PARAM) == 0, "");
-    static constexpr int VECs_PER_THREAD = MAX(1, EXPERTS / (ELTS_PER_LDG * WARP_SIZE_PARAM));
+    static_assert(EXPERTS / (ELTS_PER_LDG * WARP_SIZE) == 0 || EXPERTS % (ELTS_PER_LDG * WARP_SIZE) == 0, "");
+    static constexpr int VECs_PER_THREAD = MAX(1, EXPERTS / (ELTS_PER_LDG * WARP_SIZE));
     static constexpr int VPT = VECs_PER_THREAD * ELTS_PER_LDG;
     static constexpr int THREADS_PER_ROW = EXPERTS / VPT;
-    static const int ROWS_PER_WARP = WARP_SIZE_PARAM / THREADS_PER_ROW;
+    static constexpr int ROWS_PER_WARP = WARP_SIZE / THREADS_PER_ROW;
 };
 } // namespace detail
 
-template <int EXPERTS, int WARPS_PER_TB, int WARP_SIZE_PARAM, typename IndType>
+template <int EXPERTS, int WARPS_PER_TB, typename IndType>
 void topkGatingSoftmaxLauncherHelper(const float* input, const bool* finished, float* output, IndType* indices,
     int* source_row, const int num_rows, const int k, const int start_expert, const int end_expert, cudaStream_t stream)
 {
     static constexpr std::size_t MAX_BYTES_PER_LDG = 16;
 
     static constexpr int BYTES_PER_LDG = MIN(MAX_BYTES_PER_LDG, sizeof(float) * EXPERTS);
-    using Constants = detail::TopkConstants<EXPERTS, BYTES_PER_LDG, WARP_SIZE_PARAM>;
+    using Constants = detail::TopkConstants<EXPERTS, BYTES_PER_LDG>;
     static constexpr int VPT = Constants::VPT;
     static constexpr int ROWS_PER_WARP = Constants::ROWS_PER_WARP;
     const int num_warps = (num_rows + ROWS_PER_WARP - 1) / ROWS_PER_WARP;
     const int num_blocks = (num_warps + WARPS_PER_TB - 1) / WARPS_PER_TB;
 
-    dim3 block_dim(WARP_SIZE_PARAM, WARPS_PER_TB);
-    topkGatingSoftmax<VPT, EXPERTS, WARPS_PER_TB, BYTES_PER_LDG, WARP_SIZE_PARAM><<<num_blocks, block_dim, 0, stream>>>(
+    dim3 block_dim(WARP_SIZE, WARPS_PER_TB);
+    topkGatingSoftmax<VPT, EXPERTS, WARPS_PER_TB, BYTES_PER_LDG><<<num_blocks, block_dim, 0, stream>>>(
         input, finished, output, num_rows, indices, source_row, k, start_expert, end_expert);
 }
 
-#define LAUNCH_SOFTMAX(NUM_EXPERTS, WARPS_PER_TB)                                \
-    switch (warpSize) {                                                          \
-        case 32:                                                                 \
-            topkGatingSoftmaxLauncherHelper<NUM_EXPERTS, WARPS_PER_TB, 32>(      \
-                gating_output, nullptr, topk_weights, topk_indices,              \
-                token_expert_indices, num_tokens, topk, 0, num_experts, stream); \
-            break;                                                               \
-        case 64:                                                                 \
-            topkGatingSoftmaxLauncherHelper<NUM_EXPERTS, WARPS_PER_TB, 64>(      \
-                gating_output, nullptr, topk_weights, topk_indices,              \
-                token_expert_indices, num_tokens, topk, 0, num_experts, stream); \
-            break;                                                               \
-        default:                                                                 \
-            TORCH_CHECK(false, "Unsupported warp size: ", warpSize);             \
-    }
+#define LAUNCH_SOFTMAX(NUM_EXPERTS, WARPS_PER_TB)                       \
+    topkGatingSoftmaxLauncherHelper<NUM_EXPERTS, WARPS_PER_TB>(         \
+        gating_output, nullptr, topk_weights, topk_indices,            \
+        token_expert_indices, num_tokens, topk, 0, num_experts,         \
+        stream);
 
 template <typename IndType>
 void topkGatingSoftmaxKernelLauncher(
@@ -451,7 +441,6 @@ void topkGatingSoftmaxKernelLauncher(
     const int topk,
     cudaStream_t stream) {
     static constexpr int WARPS_PER_TB = 4;
-    auto warpSize = WARP_SIZE;
     switch (num_experts) {
         case 1:
             LAUNCH_SOFTMAX(1, WARPS_PER_TB);

csrc/moe/torch_bindings.cpp

@@ -56,17 +56,18 @@ TORCH_LIBRARY_EXPAND(TORCH_EXTENSION_NAME, m) {
       " -> Tensor");
 
   m.def(
-      "moe_permute(Tensor input, Tensor topk_ids,"
+      "moe_permute(Tensor input, Tensor topk_weight, Tensor! topk_ids,"
       "Tensor token_expert_indices, Tensor? expert_map, int n_expert,"
       "int n_local_expert,"
       "int topk, int? align_block_size,Tensor! permuted_input, Tensor! "
-      "expert_first_token_offset, Tensor! inv_permuted_idx, Tensor! "
-      "permuted_idx, Tensor! m_indices)->()");
+      "expert_first_token_offset, Tensor! src_row_id2dst_row_id_map, Tensor! "
+      "m_indices)->()");
 
   m.def(
       "moe_unpermute(Tensor permuted_hidden_states, Tensor topk_weights,"
-      "Tensor inv_permuted_idx, Tensor? expert_first_token_offset, "
-      "int topk, Tensor! hidden_states)->()");
+      "Tensor topk_ids,Tensor src_row_id2dst_row_id_map, Tensor "
+      "expert_first_token_offset, int n_expert, int n_local_expert,int "
+      "topk, Tensor! hidden_states)->()");
 
   m.def("moe_permute_unpermute_supported() -> bool");
   m.impl("moe_permute_unpermute_supported", &moe_permute_unpermute_supported);

csrc/ops.h

@@ -292,11 +292,6 @@ void per_token_group_quant_fp8(const torch::Tensor& input,
                                torch::Tensor& output_q, torch::Tensor& output_s,
                                int64_t group_size, double eps, double fp8_min,
                                double fp8_max, bool scale_ue8m0);
-
-void per_token_group_quant_int8(const torch::Tensor& input,
-                                torch::Tensor& output_q,
-                                torch::Tensor& output_s, int64_t group_size,
-                                double eps, double int8_min, double int8_max);
 #endif
 
 void static_scaled_int8_quant(torch::Tensor& out, torch::Tensor const& input,

csrc/quantization/activation_kernels.cu

@@ -4,7 +4,7 @@
 
 #include <cmath>
 #include "core/math.hpp"
-#include "../cuda_compat.h"
+#include "cuda_compat.h"
 #include "dispatch_utils.h"
 
 #include "quantization/fp8/common.cuh"

csrc/quantization/compressed_tensors/int8_quant_kernels.cu

@@ -1,8 +1,6 @@
 #include <ATen/cuda/CUDAContext.h>
 #include <torch/all.h>
 
-#include "../per_token_group_quant_8bit.h"
-
 #include <cmath>
 
 #include "../../dispatch_utils.h"
@@ -338,11 +336,3 @@ void dynamic_scaled_int8_quant(
         }
       });
 }
-
-void per_token_group_quant_int8(const torch::Tensor& input,
-                                torch::Tensor& output_q,
-                                torch::Tensor& output_s, int64_t group_size,
-                                double eps, double int8_min, double int8_max) {
-  per_token_group_quant_8bit(input, output_q, output_s, group_size, eps,
-                             int8_min, int8_max);
-}

csrc/quantization/cutlass_w8a8/moe/moe_data.cu

@@ -47,12 +47,13 @@ __global__ void compute_problem_sizes(const int32_t* __restrict__ topk_ids,
 
 __global__ void compute_expert_offsets(
     const int32_t* __restrict__ problem_sizes1, int32_t* expert_offsets,
-    int32_t* atomic_buffer, const int num_experts, const bool swap_ab) {
+    int32_t* atomic_buffer, const int num_experts, const int topk_length) {
   int32_t tot_offset = 0;
   expert_offsets[0] = 0;
   for (int i = 0; i < num_experts; ++i) {
     atomic_buffer[i] = tot_offset;
-    tot_offset += swap_ab ? problem_sizes1[i * 3 + 1] : problem_sizes1[i * 3];
+    tot_offset += topk_length > SWAP_AB_THRESHOLD ? problem_sizes1[i * 3]
+                                                  : problem_sizes1[i * 3 + 1];
     expert_offsets[i + 1] = tot_offset;
   }
 }
@@ -60,14 +61,15 @@ __global__ void compute_expert_offsets(
 __global__ void compute_expert_blockscale_offsets(
     const int32_t* __restrict__ problem_sizes1, int32_t* expert_offsets,
     int32_t* blockscale_offsets, int32_t* atomic_buffer, const int num_experts,
-    const bool swap_ab) {
+    const int topk_length) {
   int32_t tot_offset = 0;
   int32_t tot_offset_round = 0;
   expert_offsets[0] = 0;
   blockscale_offsets[0] = 0;
   for (int i = 0; i < num_experts; ++i) {
-    int32_t cur_offset =
-        swap_ab ? problem_sizes1[i * 3 + 1] : problem_sizes1[i * 3];
+    int32_t cur_offset = topk_length > SWAP_AB_THRESHOLD
+                             ? problem_sizes1[i * 3]
+                             : problem_sizes1[i * 3 + 1];
     atomic_buffer[i] = tot_offset;
     tot_offset += cur_offset;
     expert_offsets[i + 1] = tot_offset;
@@ -117,19 +119,15 @@ void get_cutlass_moe_mm_data_caller(
 
   int num_threads = min(THREADS_PER_EXPERT, topk_ids.numel());
 
-  // Swap-AB should be disabled for FP4 path
-  bool may_swap_ab = (!blockscale_offsets.has_value()) &&
-                     (topk_ids.numel() <= SWAP_AB_THRESHOLD);
-
-  if (may_swap_ab) {
-    compute_problem_sizes<true><<<num_experts, num_threads, 0, stream>>>(
+  if (topk_ids.numel() > SWAP_AB_THRESHOLD) {
+    compute_problem_sizes<false><<<num_experts, num_threads, 0, stream>>>(
         static_cast<const int32_t*>(topk_ids.data_ptr()),
         static_cast<int32_t*>(problem_sizes1.data_ptr()),
         static_cast<int32_t*>(problem_sizes2.data_ptr()),
         static_cast<int32_t*>(atomic_buffer.data_ptr()), topk_ids.numel(), n,
         k);
   } else {
-    compute_problem_sizes<false><<<num_experts, num_threads, 0, stream>>>(
+    compute_problem_sizes<true><<<num_experts, num_threads, 0, stream>>>(
         static_cast<const int32_t*>(topk_ids.data_ptr()),
         static_cast<int32_t*>(problem_sizes1.data_ptr()),
         static_cast<int32_t*>(problem_sizes2.data_ptr()),
@@ -138,19 +136,18 @@ void get_cutlass_moe_mm_data_caller(
   }
 
   if (blockscale_offsets.has_value()) {
-    // fp4 path
     compute_expert_blockscale_offsets<<<1, 1, 0, stream>>>(
         static_cast<const int32_t*>(problem_sizes1.data_ptr()),
         static_cast<int32_t*>(expert_offsets.data_ptr()),
         static_cast<int32_t*>(blockscale_offsets.value().data_ptr()),
         static_cast<int32_t*>(atomic_buffer.data_ptr()), num_experts,
-        may_swap_ab);
+        topk_ids.numel());
   } else {
     compute_expert_offsets<<<1, 1, 0, stream>>>(
         static_cast<const int32_t*>(problem_sizes1.data_ptr()),
         static_cast<int32_t*>(expert_offsets.data_ptr()),
         static_cast<int32_t*>(atomic_buffer.data_ptr()), num_experts,
-        may_swap_ab);
+        topk_ids.numel());
   }
   compute_arg_sorts<<<num_experts, num_threads, 0, stream>>>(
       static_cast<const int32_t*>(topk_ids.data_ptr()),

csrc/quantization/fp8/per_token_group_quant.cu

@@ -1,8 +1,6 @@
 #include <ATen/cuda/CUDAContext.h>
 #include <c10/util/Float8_e4m3fn.h>
 
-#include "../per_token_group_quant_8bit.h"
-
 #include <cmath>
 
 #include <cuda_fp16.h>
@@ -122,7 +120,7 @@ void per_token_group_quant_8bit(const torch::Tensor& input,
                                 torch::Tensor& output_q,
                                 torch::Tensor& output_s, int64_t group_size,
                                 double eps, double min_8bit, double max_8bit,
-                                bool scale_ue8m0) {
+                                bool scale_ue8m0 = false) {
   TORCH_CHECK(input.is_contiguous());
   TORCH_CHECK(output_q.is_contiguous());
 
@@ -200,8 +198,6 @@ void per_token_group_quant_8bit(const torch::Tensor& input,
       input.scalar_type(), "per_token_group_quant_8bit", ([&] {
         if (dst_type == at::ScalarType::Float8_e4m3fn) {
           LAUNCH_KERNEL(scalar_t, c10::Float8_e4m3fn);
-        } else if (dst_type == at::ScalarType::Char) {
-          LAUNCH_KERNEL(scalar_t, int8_t);
         }
       }));
 

csrc/quantization/gguf/gguf_kernel.cu

@@ -4,7 +4,7 @@
 #include <torch/all.h>
 #include <c10/cuda/CUDAGuard.h>
 
-#include "../../cuda_compat.h"
+#include "cuda_compat.h"
 #include "dispatch_utils.h"
 
 #include "ggml-common.h"

csrc/quantization/machete/machete_prepacked_layout.cuh

@@ -187,12 +187,8 @@ struct PrepackedLayoutBTemplate {
   CUTE_HOST_DEVICE static constexpr auto TVbNbKL_to_offset_copy(
       Shape_NKL shape_mkl) {
     auto layout = TVbNbKL_to_offset(shape_mkl);
-    // for 4-bit elements, having >= 64 values per column
-    // allows TMA to load full 32-byte sectors
-    auto inner_layout =
-        make_layout(make_shape(_256{}, size<0>(layout) / _256{}));
-
-    return make_layout(inner_layout, get<1>(layout), get<2>(layout));
+    return make_layout(coalesce(get<0>(layout)), get<1>(layout),
+                       get<2>(layout));
   }
 
   // ((BlockN, BlockK), (BlocksN, BlocksK), L) -> (storage_idx)

csrc/quantization/per_token_group_quant_8bit.h

@@ -1,10 +0,0 @@
-#pragma once
-#include <torch/all.h>
-
-// TODO(wentao): refactor the folder to 8bit, then includes fp8 and int8 folders
-// 8-bit per-token-group quantization helper used by both FP8 and INT8
-void per_token_group_quant_8bit(const torch::Tensor& input,
-                                torch::Tensor& output_q,
-                                torch::Tensor& output_s, int64_t group_size,
-                                double eps, double min_8bit, double max_8bit,
-                                bool scale_ue8m0 = false);

csrc/rocm/attention.cu

@@ -19,7 +19,7 @@
 #include <c10/cuda/CUDAGuard.h>
 #include <hip/hip_fp8.h>
 #include <hip/hip_bf16.h>
-#include "../cuda_compat.h"
+#include "cuda_compat.h"
 
 #include <algorithm>
 #include "../attention/dtype_fp8.cuh"

csrc/rocm/skinny_gemms.cu

@@ -9,7 +9,7 @@
 #include <stdexcept>
 #include <algorithm>
 
-#include "../cuda_compat.h"
+#include "cuda_compat.h"
 #include "dispatch_utils.h"
 #include "quantization/fp8/common.cuh"
 

csrc/torch_bindings.cpp

@@ -624,14 +624,6 @@ TORCH_LIBRARY_EXPAND(TORCH_EXTENSION_NAME, ops) {
   ops.impl("per_token_group_fp8_quant", torch::kCUDA,
            &per_token_group_quant_fp8);
 
-  // Compute per-token-group INT8 quantized tensor and scaling factor.
-  ops.def(
-      "per_token_group_quant_int8(Tensor input, Tensor! output_q, Tensor! "
-      "output_s, int group_size, float eps, float int8_min, float int8_max) -> "
-      "()");
-  ops.impl("per_token_group_quant_int8", torch::kCUDA,
-           &per_token_group_quant_int8);
-
   // reorder weight for AllSpark Ampere W8A16 Fused Gemm kernel
   ops.def(
       "rearrange_kn_weight_as_n32k16_order(Tensor b_qweight, Tensor b_scales, "

docker/Dockerfile

@@ -265,7 +265,7 @@ RUN if [ "$RUN_WHEEL_CHECK" = "true" ]; then \
 #################### EXTENSION Build IMAGE ####################
 
 #################### DEV IMAGE ####################
-FROM base AS dev
+FROM base as dev
 
 ARG PIP_INDEX_URL UV_INDEX_URL
 ARG PIP_EXTRA_INDEX_URL UV_EXTRA_INDEX_URL
@@ -276,6 +276,10 @@ ARG PYTORCH_CUDA_INDEX_BASE_URL
 ENV UV_HTTP_TIMEOUT=500
 ENV UV_INDEX_STRATEGY="unsafe-best-match"
 
+# Workaround for #17068
+RUN --mount=type=cache,target=/root/.cache/uv \
+    uv pip install --system --no-build-isolation "git+https://github.com/state-spaces/mamba@v2.2.4"
+
 COPY requirements/lint.txt requirements/lint.txt
 COPY requirements/test.txt requirements/test.txt
 COPY requirements/dev.txt requirements/dev.txt
@@ -386,7 +390,7 @@ RUN --mount=type=bind,from=build,src=/workspace/dist,target=/vllm-workspace/dist
 
 # Install FlashInfer from source
 ARG FLASHINFER_GIT_REPO="https://github.com/flashinfer-ai/flashinfer.git"
-ARG FLASHINFER_GIT_REF="v0.2.9rc1"
+ARG FLASHINFER_GIT_REF="v0.2.8rc1"
 RUN --mount=type=cache,target=/root/.cache/uv bash - <<'BASH'
   . /etc/environment
     git clone --depth 1 --recursive --shallow-submodules \
@@ -448,6 +452,10 @@ ARG PIP_EXTRA_INDEX_URL UV_EXTRA_INDEX_URL
 ENV UV_HTTP_TIMEOUT=500
 ENV UV_INDEX_STRATEGY="unsafe-best-match"
 
+# Workaround for #17068
+RUN --mount=type=cache,target=/root/.cache/uv \
+    uv pip install --system --no-build-isolation "git+https://github.com/state-spaces/mamba@v2.2.4"
+
 # install development dependencies (for testing)
 RUN --mount=type=cache,target=/root/.cache/uv \
     CUDA_MAJOR="${CUDA_VERSION%%.*}"; \

docker/Dockerfile.arm

@@ -0,0 +1,62 @@
+# This vLLM Dockerfile is used to construct an image that can build and run vLLM on ARM CPU platform.
+
+FROM ubuntu:22.04 AS cpu-test-arm
+
+ENV CCACHE_DIR=/root/.cache/ccache
+
+ENV CMAKE_CXX_COMPILER_LAUNCHER=ccache
+
+RUN --mount=type=cache,target=/var/cache/apt \
+    apt-get update -y \
+    && apt-get install -y curl ccache git wget vim numactl gcc-12 g++-12 python3 python3-pip libtcmalloc-minimal4 libnuma-dev \
+    && apt-get install -y ffmpeg libsm6 libxext6 libgl1 \
+    && update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-12 10 --slave /usr/bin/g++ g++ /usr/bin/g++-12
+
+# tcmalloc provides better memory allocation efficiency, e.g., holding memory in caches to speed up access of commonly-used objects.
+RUN --mount=type=cache,target=/root/.cache/pip \
+    pip install py-cpuinfo  # Use this to gather CPU info and optimize based on ARM Neoverse cores
+
+# Set LD_PRELOAD for tcmalloc on ARM
+ENV LD_PRELOAD="/usr/lib/aarch64-linux-gnu/libtcmalloc_minimal.so.4"
+
+RUN echo 'ulimit -c 0' >> ~/.bashrc
+
+WORKDIR /workspace
+
+ARG PIP_EXTRA_INDEX_URL="https://download.pytorch.org/whl/cpu"
+ENV PIP_EXTRA_INDEX_URL=${PIP_EXTRA_INDEX_URL}
+RUN --mount=type=cache,target=/root/.cache/pip \
+    --mount=type=bind,src=requirements/build.txt,target=requirements/build.txt \
+    pip install --upgrade pip && \
+    pip install -r requirements/build.txt
+
+FROM cpu-test-arm AS build
+
+WORKDIR /workspace/vllm
+
+RUN --mount=type=cache,target=/root/.cache/pip \
+    --mount=type=bind,src=requirements/common.txt,target=requirements/common.txt \
+    --mount=type=bind,src=requirements/cpu.txt,target=requirements/cpu.txt \
+    pip install -v -r requirements/cpu.txt
+
+COPY . .
+ARG GIT_REPO_CHECK=0
+RUN --mount=type=bind,source=.git,target=.git \
+    if [ "$GIT_REPO_CHECK" != 0 ]; then bash tools/check_repo.sh ; fi
+
+# Disabling AVX512 specific optimizations for ARM
+ARG VLLM_CPU_DISABLE_AVX512="true"
+ENV VLLM_CPU_DISABLE_AVX512=${VLLM_CPU_DISABLE_AVX512}
+
+RUN --mount=type=cache,target=/root/.cache/pip \
+    --mount=type=cache,target=/root/.cache/ccache \
+    --mount=type=bind,source=.git,target=.git \
+    VLLM_TARGET_DEVICE=cpu python3 setup.py bdist_wheel && \
+    pip install dist/*.whl && \
+    rm -rf dist
+
+WORKDIR /workspace/
+
+RUN ln -s /workspace/vllm/tests && ln -s /workspace/vllm/examples && ln -s /workspace/vllm/benchmarks
+
+ENTRYPOINT ["python3", "-m", "vllm.entrypoints.openai.api_server"]

docker/Dockerfile.cpu

@@ -1,11 +1,4 @@
-# This vLLM Dockerfile is used to build images that can run vLLM on both x86_64 and arm64 CPU platforms.
-#
-# Supported platforms:
-#   - linux/amd64 (x86_64)
-#   - linux/arm64 (aarch64)
-#
-# Use the `--platform` option with `docker buildx build` to specify the target architecture, e.g.:
-#   docker buildx build --platform=linux/arm64 -f docker/Dockerfile.cpu .
+# This vLLM Dockerfile is used to construct image that can build and run vLLM on x86 CPU platform.
 #
 # Build targets:
 #   vllm-openai (default): used for serving deployment
@@ -19,14 +12,16 @@
 #   VLLM_CPU_AVX512VNNI=false (default)|true
 #
 
-######################### COMMON BASE IMAGE #########################
-FROM ubuntu:22.04 AS base-common
+######################### BASE IMAGE #########################
+FROM ubuntu:22.04 AS base
 
 WORKDIR /workspace/
 
 ARG PYTHON_VERSION=3.12
 ARG PIP_EXTRA_INDEX_URL="https://download.pytorch.org/whl/cpu"
 
+ENV LD_PRELOAD=""
+
 # Install minimal dependencies and uv
 RUN --mount=type=cache,target=/var/cache/apt,sharing=locked \
     --mount=type=cache,target=/var/lib/apt,sharing=locked \
@@ -58,21 +53,7 @@ RUN --mount=type=cache,target=/root/.cache/uv \
     uv pip install --upgrade pip && \
     uv pip install -r requirements/cpu.txt
 
-ARG TARGETARCH
-ENV TARGETARCH=${TARGETARCH}
-
-######################### x86_64 BASE IMAGE #########################
-FROM base-common AS base-amd64
-
-ENV LD_PRELOAD="/usr/lib/x86_64-linux-gnu/libtcmalloc_minimal.so.4:/opt/venv/lib/libiomp5.so"
-
-######################### arm64 BASE IMAGE #########################
-FROM base-common AS base-arm64
-
-ENV LD_PRELOAD="/usr/lib/aarch64-linux-gnu/libtcmalloc_minimal.so.4"
-
-######################### BASE IMAGE #########################
-FROM base-${TARGETARCH} AS base
+ENV LD_PRELOAD="/usr/lib/x86_64-linux-gnu/libtcmalloc_minimal.so.4:/opt/venv/lib/libiomp5.so:$LD_PRELOAD"
 
 RUN echo 'ulimit -c 0' >> ~/.bashrc
 

docker/Dockerfile.tpu

@@ -1,4 +1,4 @@
-ARG NIGHTLY_DATE="20250724"
+ARG NIGHTLY_DATE="20250714"
 ARG BASE_IMAGE="us-central1-docker.pkg.dev/tpu-pytorch-releases/docker/xla:nightly_3.12_tpuvm_$NIGHTLY_DATE"
 
 FROM $BASE_IMAGE

docker/Dockerfile.xpu

@@ -47,7 +47,7 @@ FROM vllm-base AS vllm-openai
 
 # install additional dependencies for openai api server
 RUN --mount=type=cache,target=/root/.cache/pip \
-    pip install accelerate hf_transfer pytest pytest_asyncio lm_eval[api] modelscope
+    pip install accelerate hf_transfer pytest modelscope
 
 ENV VLLM_USAGE_SOURCE production-docker-image \
     TRITON_XPU_PROFILE 1

docs/api/README.md

@@ -14,6 +14,7 @@ API documentation for vLLM's configuration classes.
 - [vllm.config.DeviceConfig][]
 - [vllm.config.SpeculativeConfig][]
 - [vllm.config.LoRAConfig][]
+- [vllm.config.PromptAdapterConfig][]
 - [vllm.config.MultiModalConfig][]
 - [vllm.config.PoolerConfig][]
 - [vllm.config.DecodingConfig][]

docs/contributing/README.md

@@ -98,7 +98,7 @@ For additional features and advanced configurations, refer to the official [MkDo
 ??? console "Commands"
 
     ```bash
-    pip install -r requirements/common.txt -r requirements/dev.txt
+    pip install -r requirements/dev.txt
 
     # Linting, formatting and static type checking
     pre-commit install --hook-type pre-commit --hook-type commit-msg

docs/contributing/ci/update_pytorch_version.md

@@ -134,7 +134,7 @@ MAX_JOBS=16 uv pip install --system \
 
 ```bash
 uv pip install --system \
-    --no-build-isolation "git+https://github.com/state-spaces/mamba@v2.2.5"
+    --no-build-isolation "git+https://github.com/state-spaces/mamba@v2.2.4"
 ```
 
 ### causal-conv1d

docs/contributing/profiling.md

@@ -9,13 +9,10 @@ We support tracing vLLM workers using the `torch.profiler` module. You can enabl
 
 The OpenAI server also needs to be started with the `VLLM_TORCH_PROFILER_DIR` environment variable set.
 
-When using `vllm bench serve`, you can enable profiling by passing the `--profile` flag.
+When using `benchmarks/benchmark_serving.py`, you can enable profiling by passing the `--profile` flag.
 
 Traces can be visualized using <https://ui.perfetto.dev/>.
 
-!!! tip
-You can directly call bench module without installing vllm using `python -m vllm.entrypoints.cli.main bench`.
-
 !!! tip
     Only send a few requests through vLLM when profiling, as the traces can get quite large. Also, no need to untar the traces, they can be viewed directly.
 
@@ -38,10 +35,10 @@ VLLM_TORCH_PROFILER_DIR=./vllm_profile \
     --model meta-llama/Meta-Llama-3-70B
 ```
 
-vllm bench command:
+benchmark_serving.py:
 
 ```bash
-vllm bench serve \
+python benchmarks/benchmark_serving.py \
     --backend vllm \
     --model meta-llama/Meta-Llama-3-70B \
     --dataset-name sharegpt \
@@ -72,13 +69,13 @@ apt install nsight-systems-cli
 
 For basic usage, you can just append `nsys profile -o report.nsys-rep --trace-fork-before-exec=true --cuda-graph-trace=node` before any existing script you would run for offline inference.
 
-The following is an example using the `vllm bench latency` script:
+The following is an example using the `benchmarks/benchmark_latency.py` script:
 
 ```bash
 nsys profile -o report.nsys-rep \
     --trace-fork-before-exec=true \
     --cuda-graph-trace=node \
-vllm bench latency \
+    python benchmarks/benchmark_latency.py \
     --model meta-llama/Llama-3.1-8B-Instruct \
     --num-iters-warmup 5 \
     --num-iters 1 \
@@ -101,7 +98,7 @@ nsys profile -o report.nsys-rep \
     vllm serve meta-llama/Llama-3.1-8B-Instruct
 
 # client
-vllm bench serve \
+python benchmarks/benchmark_serving.py \
     --backend vllm \
     --model meta-llama/Llama-3.1-8B-Instruct \
     --num-prompts 1 \
@@ -135,7 +132,7 @@ You can view these profiles either as summaries in the CLI, using `nsys stats [p
     ...
     ** CUDA GPU Kernel Summary (cuda_gpu_kern_sum):
 
-    Time (%)  Total Time (ns)  Instances   Avg (ns)     Med (ns)    Min (ns)  Max (ns)   StdDev (ns)                                                  Name
+    Time (%)  Total Time (ns)  Instances   Avg (ns)     Med (ns)    Min (ns)  Max (ns)   StdDev (ns)                                                  Name                                                
     --------  ---------------  ---------  -----------  -----------  --------  ---------  -----------  ----------------------------------------------------------------------------------------------------
         46.3   10,327,352,338     17,505    589,965.9    144,383.0    27,040  3,126,460    944,263.8  sm90_xmma_gemm_bf16bf16_bf16f32_f32_tn_n_tilesize128x128x64_warpgroupsize1x1x1_execute_segment_k_of…
         14.8    3,305,114,764      5,152    641,520.7    293,408.0   287,296  2,822,716    867,124.9  sm90_xmma_gemm_bf16bf16_bf16f32_f32_tn_n_tilesize256x128x64_warpgroupsize2x1x1_execute_segment_k_of…
@@ -146,7 +143,7 @@ You can view these profiles either as summaries in the CLI, using `nsys stats [p
         2.6      587,283,113     37,824     15,526.7      3,008.0     2,719  2,517,756    139,091.1  std::enable_if<T2>(int)0&&vllm::_typeConvert<T1>::exists, void>::type vllm::fused_add_rms_norm_kern…
         1.9      418,362,605     18,912     22,121.5      3,871.0     3,328  2,523,870    175,248.2  void vllm::rotary_embedding_kernel<c10::BFloat16, (bool)1>(const long *, T1 *, T1 *, const T1 *, in…
         0.7      167,083,069     18,880      8,849.7      2,240.0     1,471  2,499,996    101,436.1  void vllm::reshape_and_cache_flash_kernel<__nv_bfloat16, __nv_bfloat16, (vllm::Fp8KVCacheDataType)0…
-    ...
+    ... 
     ```
 
 GUI example:

docs/design/v1/p2p_nccl_connector.md

@@ -3,14 +3,14 @@ An implementation of xPyD with dynamic scaling based on point-to-point communica
 # Detailed Design
 
 ## Overall Process
-As shown in Figure 1, the overall process of this **PD disaggregation** solution is described through a request flow:
+As shown in Figure 1, the overall process of this **PD disaggregation** solution is described through a request flow:  
 
-1. The client sends an HTTP request to the Proxy/Router's `/v1/completions` interface.
-2. The Proxy/Router selects a **1P1D (1 Prefill instance + 1 Decode instance)** through either through round-robin or random selection, generates a `request_id` (rules to be introduced later), modifies the `max_tokens` in the HTTP request message to **1**, and then forwards the request to the **P instance**.
-3. Immediately afterward, the Proxy/Router forwards the **original HTTP request** to the **D instance**.
-4. The **P instance** performs **Prefill** and then **actively sends the generated KV cache** to the D instance (using **PUT_ASYNC** mode). The D instance's `zmq_addr` can be resolved through the `request_id`.
-5. The **D instance** has a **dedicated thread** for receiving the KV cache (to avoid blocking the main process). The received KV cache is saved into the **GPU memory buffer**, the size of which is determined by the vLLM startup parameter `kv_buffer_size`. When the GPU buffer is full, the KV cache is stored in the **local Tensor memory pool**.
-6. During the **Decode**, the D instance's main process retrieves the KV cache (transmitted by the P instance) from either the **GPU buffer** or the **memory pool**, thereby **skipping Prefill**.
+1. The client sends an HTTP request to the Proxy/Router's `/v1/completions` interface.  
+2. The Proxy/Router selects a **1P1D (1 Prefill instance + 1 Decode instance)** through either through round-robin or random selection, generates a `request_id` (rules to be introduced later), modifies the `max_tokens` in the HTTP request message to **1**, and then forwards the request to the **P instance**.  
+3. Immediately afterward, the Proxy/Router forwards the **original HTTP request** to the **D instance**.  
+4. The **P instance** performs **Prefill** and then **actively sends the generated KV cache** to the D instance (using **PUT_ASYNC** mode). The D instance's `zmq_addr` can be resolved through the `request_id`.  
+5. The **D instance** has a **dedicated thread** for receiving the KV cache (to avoid blocking the main process). The received KV cache is saved into the **GPU memory buffer**, the size of which is determined by the vLLM startup parameter `kv_buffer_size`. When the GPU buffer is full, the KV cache is stored in the **local Tensor memory pool**.  
+6. During the **Decode**, the D instance's main process retrieves the KV cache (transmitted by the P instance) from either the **GPU buffer** or the **memory pool**, thereby **skipping Prefill**.  
 7. After completing **Decode**, the D instance returns the result to the **Proxy/Router**, which then forwards it to the **client**.
 
 ![image1](https://github.com/user-attachments/assets/fb01bde6-755b-49f7-ad45-48a94b1e10a7)
@@ -291,7 +291,7 @@ curl -X POST -s http://10.0.1.1:10001/v1/completions \
 ??? console "Command"
 
     ```shell
-    vllm bench serve \
+    python3 benchmark_serving.py \
         --backend vllm \
         --model base_model \
         --tokenizer meta-llama/Llama-3.1-8B-Instruct \

docs/features/compatibility_matrix.md

@@ -34,22 +34,23 @@ th:not(:first-child) {
 }
 </style>
 
-| Feature | [CP][chunked-prefill] | [APC](automatic_prefix_caching.md) | [LoRA](lora.md) | [SD](spec_decode.md) | CUDA graph | <abbr title="Pooling Models">pooling</abbr> | <abbr title="Encoder-Decoder Models">enc-dec</abbr> | <abbr title="Logprobs">logP</abbr> | <abbr title="Prompt Logprobs">prmpt logP</abbr> | <abbr title="Async Output Processing">async output</abbr> | multi-step | <abbr title="Multimodal Inputs">mm</abbr> | best-of | beam-search |
-|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
+| Feature | [CP][chunked-prefill] | [APC](automatic_prefix_caching.md) | [LoRA](lora.md) | <abbr title="Prompt Adapter">prmpt adptr</abbr> | [SD](spec_decode.md) | CUDA graph | <abbr title="Pooling Models">pooling</abbr> | <abbr title="Encoder-Decoder Models">enc-dec</abbr> | <abbr title="Logprobs">logP</abbr> | <abbr title="Prompt Logprobs">prmpt logP</abbr> | <abbr title="Async Output Processing">async output</abbr> | multi-step | <abbr title="Multimodal Inputs">mm</abbr> | best-of | beam-search |
+|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | [CP][chunked-prefill] | ✅ | | | | | | | | | | | | | | |
 | [APC](automatic_prefix_caching.md) | ✅ | ✅ | | | | | | | | | | | | | |
 | [LoRA](lora.md) | ✅ | ✅ | ✅ | | | | | | | | | | | | |
-| [SD](spec_decode.md) | ✅ | ✅ | ❌ | ✅ | | | | | | | | | | |
-| CUDA graph | ✅ | ✅ | ✅ | ✅ | ✅ | | | | | | | | | |
-| <abbr title="Pooling Models">pooling</abbr> | ❌ | ❌ | ❌ | ❌ | ❌ | ✅ | | | | | | | | |
-| <abbr title="Encoder-Decoder Models">enc-dec</abbr> | ❌ | [❌](gh-issue:7366) | ❌ | [❌](gh-issue:7366) | ✅ | ✅ | ✅ | | | | | | | |
-| <abbr title="Logprobs">logP</abbr> | ✅ | ✅ | ✅ | ✅ | ✅ | ❌ | ✅ | ✅ | | | | | | |
-| <abbr title="Prompt Logprobs">prmpt logP</abbr> | ✅ | ✅ | ✅ | ✅ | ✅ | ❌ | ✅ | ✅ | ✅ | | | | | |
-| <abbr title="Async Output Processing">async output</abbr> | ✅ | ✅ | ✅ | ❌ | ✅ | ❌ | ❌ | ✅ | ✅ | ✅ | | | | |
-| multi-step | ❌ | ✅ | ❌ | ❌ | ✅ | ❌ | ❌ | ✅ | ✅ | ✅ | ✅ | | | |
-| <abbr title="Multimodal Inputs">mm</abbr> | ✅ | [🟠](gh-pr:8348) | [🟠](gh-pr:4194) | ❔ | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ | ❔ | ✅ | | |
-| best-of | ✅ | ✅ | ✅ | [❌](gh-issue:6137) | ✅ | ❌ | ✅ | ✅ | ✅ | ❔ | [❌](gh-issue:7968) | ✅ | ✅ | |
-| beam-search | ✅ | ✅ | ✅ | [❌](gh-issue:6137) | ✅ | ❌ | ✅ | ✅ | ✅ | ❔ | [❌](gh-issue:7968) | ❔ | ✅ | ✅ |
+| <abbr title="Prompt Adapter">prmpt adptr</abbr> | ✅ | ✅ | ✅ | ✅ | | | | | | | | | | | |
+| [SD](spec_decode.md) | ✅ | ✅ | ❌ | ✅ | ✅ | | | | | | | | | | |
+| CUDA graph | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ | | | | | | | | | |
+| <abbr title="Pooling Models">pooling</abbr> | ❌ | ❌ | ❌ | ❌ | ❌ | ❌ | ✅ | | | | | | | | |
+| <abbr title="Encoder-Decoder Models">enc-dec</abbr> | ❌ | [❌](gh-issue:7366) | ❌ | ❌ | [❌](gh-issue:7366) | ✅ | ✅ | ✅ | | | | | | | |
+| <abbr title="Logprobs">logP</abbr> | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ | ❌ | ✅ | ✅ | | | | | | |
+| <abbr title="Prompt Logprobs">prmpt logP</abbr> | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ | ❌ | ✅ | ✅ | ✅ | | | | | |
+| <abbr title="Async Output Processing">async output</abbr> | ✅ | ✅ | ✅ | ✅ | ❌ | ✅ | ❌ | ❌ | ✅ | ✅ | ✅ | | | | |
+| multi-step | ❌ | ✅ | ❌ | ✅ | ❌ | ✅ | ❌ | ❌ | ✅ | ✅ | ✅ | ✅ | | | |
+| <abbr title="Multimodal Inputs">mm</abbr> | ✅ | [🟠](gh-pr:8348) | [🟠](gh-pr:4194) | ❔ | ❔ | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ | ❔ | ✅ | | |
+| best-of | ✅ | ✅ | ✅ | ✅ | [❌](gh-issue:6137) | ✅ | ❌ | ✅ | ✅ | ✅ | ❔ | [❌](gh-issue:7968) | ✅ | ✅ | |
+| beam-search | ✅ | ✅ | ✅ | ✅ | [❌](gh-issue:6137) | ✅ | ❌ | ✅ | ✅ | ✅ | ❔ | [❌](gh-issue:7968) | ❔ | ✅ | ✅ |
 
 [](){ #feature-x-hardware }
 
@@ -58,9 +59,10 @@ th:not(:first-child) {
 | Feature                                                   | Volta               | Turing    | Ampere    | Ada    | Hopper     | CPU                | AMD    | TPU |
 |-----------------------------------------------------------|---------------------|-----------|-----------|--------|------------|--------------------|--------|-----|
 | [CP][chunked-prefill]                                     | [❌](gh-issue:2729) | ✅        | ✅        | ✅     | ✅        | ✅                  | ✅     | ✅ |
-| [APC](automatic_prefix_caching.md)                        | [❌](gh-issue:3687) | ✅        | ✅        | ✅     | ✅        | ✅                  | ✅     | ✅ |
-| [LoRA](lora.md)                                           | ✅                  | ✅        | ✅        | ✅     | ✅        | ✅                  | ✅     | ✅ |
-| [SD](spec_decode.md)                                      | ✅                  | ✅        | ✅        | ✅     | ✅        | ✅                  | ✅     | ❌ |
+| [APC](automatic_prefix_caching.md)                           | [❌](gh-issue:3687) | ✅        | ✅        | ✅     | ✅        | ✅                  | ✅     | ✅ |
+| [LoRA](lora.md)                                      | ✅                  | ✅        | ✅        | ✅     | ✅        | ✅                  | ✅     | ✅ |
+| <abbr title="Prompt Adapter">prmpt adptr</abbr>           | ✅                  | ✅        | ✅        | ✅     | ✅        | [❌](gh-issue:8475) | ✅     | ❌ |
+| [SD](spec_decode.md)                                         | ✅                  | ✅        | ✅        | ✅     | ✅        | ✅                  | ✅     | ❌ |
 | CUDA graph                                                | ✅                  | ✅        | ✅        | ✅     | ✅        | ❌                  | ✅     | ❌ |
 | <abbr title="Pooling Models">pooling</abbr>               | ✅                  | ✅        | ✅        | ✅     | ✅        | ✅                  | ❔     | ❌ |
 | <abbr title="Encoder-Decoder Models">enc-dec</abbr>       | ✅                  | ✅        | ✅        | ✅     | ✅        | ✅                  | ❌     | ❌ |

docs/features/multimodal_inputs.md

@@ -177,70 +177,6 @@ Multi-image input can be extended to perform video captioning. We show this with
 You can pass a list of NumPy arrays directly to the `'video'` field of the multi-modal dictionary
 instead of using multi-image input.
 
-Instead of NumPy arrays, you can also pass `'torch.Tensor'` instances, as shown in this example using Qwen2.5-VL:
-
-??? code
-
-    ```python
-    from transformers import AutoProcessor
-    from vllm import LLM, SamplingParams
-    from qwen_vl_utils import process_vision_info
-
-    model_path = "Qwen/Qwen2.5-VL-3B-Instruct/"
-    video_path = "https://content.pexels.com/videos/free-videos.mp4"
-
-    llm = LLM(
-        model=model_path,
-        gpu_memory_utilization=0.8,
-        enforce_eager=True,
-        limit_mm_per_prompt={"video": 1},
-    )
-
-    sampling_params = SamplingParams(
-        max_tokens=1024,
-    )
-
-    video_messages = [
-        {"role": "system", "content": "You are a helpful assistant."},
-        {"role": "user", "content": [
-                {"type": "text", "text": "describe this video."},
-                {
-                    "type": "video",
-                    "video": video_path,
-                    "total_pixels": 20480 * 28 * 28,
-                    "min_pixels": 16 * 28 * 28
-                }
-            ]
-        },
-    ]
-
-    messages = video_messages
-    processor = AutoProcessor.from_pretrained(model_path)
-    prompt = processor.apply_chat_template(
-        messages,
-        tokenize=False,
-        add_generation_prompt=True,
-    )
-
-    image_inputs, video_inputs = process_vision_info(messages)
-    mm_data = {}
-    if video_inputs is not None:
-        mm_data["video"] = video_inputs
-
-    llm_inputs = {
-        "prompt": prompt,
-        "multi_modal_data": mm_data,
-    }
-
-    outputs = llm.generate([llm_inputs], sampling_params=sampling_params)
-    for o in outputs:
-        generated_text = o.outputs[0].text
-        print(generated_text)
-    ```
-
-    !!! note
-        'process_vision_info' is only applicable to Qwen2.5-VL and similar models.
-
 Full example: <gh-file:examples/offline_inference/vision_language.py>
 
 ### Audio Inputs
@@ -343,7 +279,7 @@ Here is a simple example using Phi-3.5-Vision.
 First, launch the OpenAI-compatible server:
 
 ```bash
-vllm serve microsoft/Phi-3.5-vision-instruct --runner generate \
+vllm serve microsoft/Phi-3.5-vision-instruct --task generate \
   --trust-remote-code --max-model-len 4096 --limit-mm-per-prompt '{"image":2}'
 ```
 
@@ -422,7 +358,7 @@ Instead of `image_url`, you can pass a video file via `video_url`. Here is a sim
 First, launch the OpenAI-compatible server:
 
 ```bash
-vllm serve llava-hf/llava-onevision-qwen2-0.5b-ov-hf --runner generate --max-model-len 8192
+vllm serve llava-hf/llava-onevision-qwen2-0.5b-ov-hf --task generate --max-model-len 8192
 ```
 
 Then, you can use the OpenAI client as follows:

docs/features/prompt_embeds.md

@@ -34,7 +34,7 @@ Prompt embeddings are passed in as base64 encoded torch tensors.
 First, launch the OpenAI-compatible server:
 
 ```bash
-vllm serve meta-llama/Llama-3.2-1B-Instruct --runner generate \
+vllm serve meta-llama/Llama-3.2-1B-Instruct --task generate \
   --max-model-len 4096 --enable-prompt-embeds
 ```
 

docs/features/quantization/README.md

@@ -6,7 +6,6 @@ Contents:
 
 - [Supported Hardware](supported_hardware.md)
 - [AutoAWQ](auto_awq.md)
-- [AutoRound](auto_round.md)
 - [BitsAndBytes](bnb.md)
 - [BitBLAS](bitblas.md)
 - [GGUF](gguf.md)

docs/features/quantization/auto_round.md

@@ -1,103 +0,0 @@
-# AutoRound
-
-[AutoRound](https://github.com/intel/auto-round) is Intel’s advanced quantization algorithm designed to produce highly efficient **INT2, INT3, INT4, and INT8**
-quantized large language models—striking an optimal balance between accuracy and deployment performance.
-
-AutoRound applies weight-only quantization to transformer-based models, enabling significant memory savings and faster
-inference while maintaining near-original accuracy. It supports a wide range of hardware platforms, including **CPUs,
-Intel GPUs, HPUs, and CUDA-enabled devices**.
-
-Please refer to the [AutoRound guide](https://github.com/intel/auto-round/blob/main/docs/step_by_step.md) for more details.
-
-Key Features:
-
-✅ **AutoRound, AutoAWQ, AutoGPTQ, and GGUF** are supported
-
-✅ **10+ vision-language models (VLMs)** are supported
-
-✅ **Per-layer mixed-bit quantization** for fine-grained control
-
-✅ **RTN (Round-To-Nearest) mode** for quick quantization with slight accuracy loss
-
-✅ **Multiple quantization recipes**: best, base, and light
-
-✅ Advanced utilities such as immediate packing and support for **10+ backends**
-
-## Installation
-
-```bash
-uv pip install auto-round
-```
-
-## Quantizing a model
-
-For VLMs, please change to `auto-round-mllm` in CLI usage and `AutoRoundMLLM` in API usage.
-
-### CLI usage
-
-```bash
-auto-round \
-    --model Qwen/Qwen3-0.6B \
-    --bits 4 \
-    --group_size 128 \
-    --format "auto_round" \
-    --output_dir ./tmp_autoround
-```
-
-```bash
-auto-round \
-    --model Qwen/Qwen3-0.6B \
-    --format "gguf:q4_k_m" \
-    --output_dir ./tmp_autoround
-```
-
-### API usage
-
-```python
-from transformers import AutoModelForCausalLM, AutoTokenizer
-from auto_round import AutoRound
-
-model_name = "Qwen/Qwen3-0.6B"
-model = AutoModelForCausalLM.from_pretrained(model_name, torch_dtype="auto")
-tokenizer = AutoTokenizer.from_pretrained(model_name)
-
-bits, group_size, sym = 4, 128, True
-autoround = AutoRound(model, tokenizer, bits=bits, group_size=group_size, sym=sym)
-
-# the best accuracy, 4-5X slower, low_gpu_mem_usage could save ~20G but ~30% slower
-# autoround = AutoRound(model, tokenizer, nsamples=512, iters=1000, low_gpu_mem_usage=True, bits=bits, group_size=group_size, sym=sym)
-
-# 2-3X speedup, slight accuracy drop at W4G128
-# autoround = AutoRound(model, tokenizer, nsamples=128, iters=50, lr=5e-3, bits=bits, group_size=group_size, sym=sym )
-
-output_dir = "./tmp_autoround"
-# format= 'auto_round'(default), 'auto_gptq', 'auto_awq'
-autoround.quantize_and_save(output_dir, format="auto_round")
-```
-
-## Running a quantized model with vLLM
-
-Here is some example code to run auto-round format in vLLM:
-
-```python
-from vllm import LLM, SamplingParams
-
-prompts = [
-    "Hello, my name is",
-]
-sampling_params = SamplingParams(temperature=0.6, top_p=0.95)
-model_name = "Intel/DeepSeek-R1-0528-Qwen3-8B-int4-AutoRound"
-llm = LLM(model=model_name)
-
-outputs = llm.generate(prompts, sampling_params)
-
-for output in outputs:
-    prompt = output.prompt
-    generated_text = output.outputs[0].text
-    print(f"Prompt: {prompt!r}, Generated text: {generated_text!r}")
-```
-
-# Acknowledgement
-
-Special thanks to open-source low precision libraries such as AutoGPTQ, AutoAWQ, GPTQModel, Triton, Marlin, and
-ExLLaMAV2 for providing low-precision CUDA kernels, which are leveraged in AutoRound.

docs/features/tool_calling.md

@@ -103,8 +103,7 @@ When tool_choice='required' is set, the model is guaranteed to generate one or m
 
 vLLM supports the `tool_choice='none'` option in the chat completion API. When this option is set, the model will not generate any tool calls and will respond with regular text content only, even if tools are defined in the request.
 
-!!! note
-    When tools are specified in the request, vLLM includes tool definitions in the prompt by default, regardless of the `tool_choice` setting. To exclude tool definitions when `tool_choice='none'`, use the `--exclude-tools-when-tool-choice-none` option.
+However, when `tool_choice='none'` is specified, vLLM includes tool definitions from the prompt.
 
 ## Automatic Function Calling
 

docs/getting_started/installation/cpu/arm.inc.md

@@ -33,7 +33,7 @@ Testing has been conducted on AWS Graviton3 instances for compatibility.
 # --8<-- [end:pre-built-images]
 # --8<-- [start:build-image-from-source]
 ```bash
-docker build -f docker/Dockerfile.cpu \
+docker build -f docker/Dockerfile.arm \
         --tag vllm-cpu-env .
 
 # Launching OpenAI server

docs/models/extensions/tensorizer.md

@@ -5,98 +5,9 @@ vLLM model tensors that have been serialized to disk, an HTTP/HTTPS endpoint, or
 at runtime extremely quickly directly to the GPU, resulting in significantly
 shorter Pod startup times and CPU memory usage. Tensor encryption is also supported.
 
-vLLM fully integrates Tensorizer in to its model loading machinery. The following will give a brief overview on how to get started with using Tensorizer on vLLM.
+For more information on CoreWeave's Tensorizer, please refer to
+[CoreWeave's Tensorizer documentation](https://github.com/coreweave/tensorizer). For more information on serializing a vLLM model, as well a general usage guide to using Tensorizer with vLLM, see
+the [vLLM example script](../../examples/others/tensorize_vllm_model.md).
 
-## Installing Tensorizer
-
-To install `tensorizer`, run `pip install vllm[tensorizer]`.
-
-## The basics
-
-To load a model using Tensorizer, the model first needs to be serialized by
-Tensorizer. [The example script](../../examples/others/tensorize_vllm_model.md) takes care of this process.
-
-Let's walk through a basic example by serializing `facebook/opt-125m` using the script, and then loading it for inference.
-
-## Serializing a vLLM model with Tensorizer
-
-To serialize a model with Tensorizer, call the example script with the necessary
-CLI arguments. The docstring for the script itself explains the CLI args
-and how to use it properly in great detail, and we'll use one of the examples from the docstring directly, assuming we want to serialize and save our model at our S3 bucket example `s3://my-bucket`:
-
-```bash
-python examples/others/tensorize_vllm_model.py \
-   --model facebook/opt-125m \
-   serialize \
-   --serialized-directory s3://my-bucket \
-   --suffix v1
-```
-
-This saves the model tensors at `s3://my-bucket/vllm/facebook/opt-125m/v1`. If you intend on applying a LoRA adapter to your tensorized model, you can pass the HF id of the LoRA adapter in the above command, and the artifacts will be saved there too:
-
-```bash
-python examples/others/tensorize_vllm_model.py \
-   --model facebook/opt-125m \
-   --lora-path <lora_id> \
-   serialize \
-   --serialized-directory s3://my-bucket \
-   --suffix v1
-```
-
-## Serving the model using Tensorizer
-
-Once the model is serialized where you want it, you can load the model using `vllm serve` or the `LLM` entrypoint. You can pass the directory where you saved the model to the `model` argument for `LLM()` and `vllm serve`. For example, to serve the tensorized model saved previously with the LoRA adapter, you'd do:
-
-```bash
-vllm serve s3://my-bucket/vllm/facebook/opt-125m/v1 \
-    --load-format tensorizer \
-    --enable-lora 
-```
-
-Or, with `LLM()`:
-
-```python
-from vllm import LLM
-llm = LLM(
-    "s3://my-bucket/vllm/facebook/opt-125m/v1", 
-    load_format="tensorizer",
-    enable_lora=True
-)
-```
-
-## Options for configuring Tensorizer
-
-`tensorizer`'s core objects that serialize and deserialize models are `TensorSerializer` and `TensorDeserializer` respectively. In order to pass arbitrary kwargs to these, which will configure the serialization and deserialization processes, you can provide them as keys to `model_loader_extra_config` with `serialization_kwargs` and `deserialization_kwargs` respectively. Full docstrings detailing all parameters for the aforementioned objects can be found in `tensorizer`'s [serialization.py](https://github.com/coreweave/tensorizer/blob/main/tensorizer/serialization.py) file.
-
-As an example, CPU concurrency can be limited when serializing with `tensorizer` via the `limit_cpu_concurrency` parameter in the initializer for `TensorSerializer`. To set `limit_cpu_concurrency` to some arbitrary value, you would do so like this when serializing:
-
-```bash
-python examples/others/tensorize_vllm_model.py \
-   --model facebook/opt-125m \
-   --lora-path <lora_id> \
-   serialize \
-   --serialized-directory s3://my-bucket \
-   --serialization-kwargs '{"limit_cpu_concurrency": 2}' \
-   --suffix v1
-```
-
-As an example when customizing the loading process via `TensorDeserializer`, you could limit the number of concurrency readers during deserialization with the `num_readers` parameter in the initializer via `model_loader_extra_config` like so:
-
-```bash
-vllm serve s3://my-bucket/vllm/facebook/opt-125m/v1 \
-    --load-format tensorizer \
-    --enable-lora \
-    --model-loader-extra-config '{"deserialization_kwargs": {"num_readers": 2}}'
-```
-
-Or with `LLM()`:
-
-```python
-from vllm import LLM
-llm = LLM(
-    "s3://my-bucket/vllm/facebook/opt-125m/v1", 
-    load_format="tensorizer",
-    enable_lora=True,
-    model_loader_extra_config={"deserialization_kwargs": {"num_readers": 2}}
-)
-```
+!!! note
+    Note that to use this feature you will need to install `tensorizer` by running `pip install vllm[tensorizer]`.

docs/models/generative_models.md

@@ -2,19 +2,12 @@
 
 vLLM provides first-class support for generative models, which covers most of LLMs.
 
-In vLLM, generative models implement the[VllmModelForTextGeneration][vllm.model_executor.models.VllmModelForTextGeneration] interface.
+In vLLM, generative models implement the [VllmModelForTextGeneration][vllm.model_executor.models.VllmModelForTextGeneration] interface.
 Based on the final hidden states of the input, these models output log probabilities of the tokens to generate,
 which are then passed through [Sampler][vllm.model_executor.layers.Sampler] to obtain the final text.
 
-## Configuration
-
-### Model Runner (`--runner`)
-
-Run a model in generation mode via the option `--runner generate`.
-
-!!! tip
-    There is no need to set this option in the vast majority of cases as vLLM can automatically
-    detect the model runner to use via `--runner auto`.
+For generative models, the only supported `--task` option is `"generate"`.
+Usually, this is automatically inferred so you don't have to specify it.
 
 ## Offline Inference
 

docs/models/pooling_models.md

@@ -1,9 +1,9 @@
 # Pooling Models
 
-vLLM also supports pooling models, such as embedding, classification and reward models.
+vLLM also supports pooling models, including embedding, reranking and reward models.
 
 In vLLM, pooling models implement the [VllmModelForPooling][vllm.model_executor.models.VllmModelForPooling] interface.
-These models use a [Pooler][vllm.model_executor.layers.pooler.Pooler] to extract the final hidden states of the input
+These models use a [Pooler][vllm.model_executor.layers.Pooler] to extract the final hidden states of the input
 before returning them.
 
 !!! note
@@ -11,39 +11,18 @@ before returning them.
     As shown in the [Compatibility Matrix](../features/compatibility_matrix.md), most vLLM features are not applicable to
     pooling models as they only work on the generation or decode stage, so performance may not improve as much.
 
-## Configuration
+If the model doesn't implement this interface, you can set `--task` which tells vLLM
+to convert the model into a pooling model.
 
-### Model Runner
+| `--task`   | Model type           | Supported pooling tasks       |
+|------------|----------------------|-------------------------------|
+| `embed`    | Embedding model      | `encode`, `embed`             |
+| `classify` | Classification model | `encode`, `classify`, `score` |
+| `reward`   | Reward model         | `encode`                      |
 
-Run a model in pooling mode via the option `--runner pooling`.
+## Pooling Tasks
 
-!!! tip
-    There is no need to set this option in the vast majority of cases as vLLM can automatically
-    detect the model runner to use via `--runner auto`.
-
-### Model Conversion
-
-vLLM can adapt models for various pooling tasks via the option `--convert <type>`.
-
-If `--runner pooling` has been set (manually or automatically) but the model does not implement the
-[VllmModelForPooling][vllm.model_executor.models.VllmModelForPooling] interface,
-vLLM will attempt to automatically convert the model according to the architecture names
-shown in the table below.
-
-| Architecture                                    | `--convert` | Supported pooling tasks       |
-|-------------------------------------------------|-------------|-------------------------------|
-| `*ForTextEncoding`, `*EmbeddingModel`, `*Model` | `embed`     | `encode`, `embed`             |
-| `*For*Classification`, `*ClassificationModel`   | `classify`  | `encode`, `classify`, `score` |
-| `*ForRewardModeling`, `*RewardModel`            | `reward`    | `encode`                      |
-
-!!! tip
-    You can explicitly set `--convert <type>` to specify how to convert the model.
-
-### Pooling Tasks
-
-Each pooling model in vLLM supports one or more of these tasks according to
-[Pooler.get_supported_tasks][vllm.model_executor.layers.pooler.Pooler.get_supported_tasks],
-enabling the corresponding APIs:
+In vLLM, we define the following pooling tasks and corresponding APIs:
 
 | Task       | APIs               |
 |------------|--------------------|
@@ -52,19 +31,11 @@ enabling the corresponding APIs:
 | `classify` | `classify`         |
 | `score`    | `score`            |
 
-\* The `score` API falls back to `embed` task if the model does not support `score` task.
+\*The `score` API falls back to `embed` task if the model does not support `score` task.
 
-### Pooler Configuration
+Each pooling model in vLLM supports one or more of these tasks according to [Pooler.get_supported_tasks][vllm.model_executor.layers.Pooler.get_supported_tasks].
 
-#### Predefined models
-
-If the [Pooler][vllm.model_executor.layers.pooler.Pooler] defined by the model accepts `pooler_config`,
-you can override some of its attributes via the `--override-pooler-config` option.
-
-#### Converted models
-
-If the model has been converted via `--convert` (see above),
-the pooler assigned to each task has the following attributes by default:
+By default, the pooler assigned to each task has the following attributes:
 
 | Task       | Pooling Type   | Normalization | Softmax |
 |------------|----------------|---------------|---------|
@@ -72,12 +43,20 @@ the pooler assigned to each task has the following attributes by default:
 | `embed`    | `LAST`         | ✅︎            | ❌      |
 | `classify` | `LAST`         | ❌            | ✅︎      |
 
+These defaults may be overridden by the model's implementation in vLLM.
+
 When loading [Sentence Transformers](https://huggingface.co/sentence-transformers) models,
-its Sentence Transformers configuration file (`modules.json`) takes priority over the model's defaults.
+we attempt to override the defaults based on its Sentence Transformers configuration file (`modules.json`),
+which takes priority over the model's defaults.
 
 You can further customize this via the `--override-pooler-config` option,
 which takes priority over both the model's and Sentence Transformers's defaults.
 
+!!! note
+
+    The above configuration may be disregarded if the model's implementation in vLLM defines its own pooler
+    that is not based on [PoolerConfig][vllm.config.PoolerConfig].
+
 ## Offline Inference
 
 The [LLM][vllm.LLM] class provides various methods for offline inference.
@@ -91,7 +70,7 @@ It returns the extracted hidden states directly, which is useful for reward mode
 ```python
 from vllm import LLM
 
-llm = LLM(model="Qwen/Qwen2.5-Math-RM-72B", runner="pooling")
+llm = LLM(model="Qwen/Qwen2.5-Math-RM-72B", task="reward")
 (output,) = llm.encode("Hello, my name is")
 
 data = output.outputs.data
@@ -106,7 +85,7 @@ It is primarily designed for embedding models.
 ```python
 from vllm import LLM
 
-llm = LLM(model="intfloat/e5-mistral-7b-instruct", runner="pooling")
+llm = LLM(model="intfloat/e5-mistral-7b-instruct", task="embed")
 (output,) = llm.embed("Hello, my name is")
 
 embeds = output.outputs.embedding
@@ -123,7 +102,7 @@ It is primarily designed for classification models.
 ```python
 from vllm import LLM
 
-llm = LLM(model="jason9693/Qwen2.5-1.5B-apeach", runner="pooling")
+llm = LLM(model="jason9693/Qwen2.5-1.5B-apeach", task="classify")
 (output,) = llm.classify("Hello, my name is")
 
 probs = output.outputs.probs
@@ -144,7 +123,7 @@ It is designed for embedding models and cross encoder models. Embedding models u
 ```python
 from vllm import LLM
 
-llm = LLM(model="BAAI/bge-reranker-v2-m3", runner="pooling")
+llm = LLM(model="BAAI/bge-reranker-v2-m3", task="score")
 (output,) = llm.score("What is the capital of France?",
                       "The capital of Brazil is Brasilia.")
 
@@ -196,7 +175,7 @@ You can change the output dimensions of embedding models that support Matryoshka
 from vllm import LLM, PoolingParams
 
 llm = LLM(model="jinaai/jina-embeddings-v3",
-          runner="pooling",
+          task="embed",
           trust_remote_code=True)
 outputs = llm.embed(["Follow the white rabbit."],
                     pooling_params=PoolingParams(dimensions=32))

docs/models/supported_models.md

@@ -1,6 +1,7 @@
 # Supported Models
 
 vLLM supports [generative](./generative_models.md) and [pooling](./pooling_models.md) models across various tasks.
+If a model supports more than one task, you can set the task via the `--task` argument.
 
 For each task, we list the model architectures that have been implemented in vLLM.
 Alongside each architecture, we include some popular models that use it.
@@ -23,7 +24,7 @@ To check if the modeling backend is Transformers, you can simply do this:
 
 ```python
 from vllm import LLM
-llm = LLM(model=...)  # Name or path of your model
+llm = LLM(model=..., task="generate")  # Name or path of your model
 llm.apply_model(lambda model: print(type(model)))
 ```
 
@@ -157,13 +158,13 @@ The [Transformers backend][transformers-backend] enables you to run models direc
     ```python
     from vllm import LLM
 
-    # For generative models (runner=generate) only
-    llm = LLM(model=..., runner="generate")  # Name or path of your model
+    # For generative models (task=generate) only
+    llm = LLM(model=..., task="generate")  # Name or path of your model
     output = llm.generate("Hello, my name is")
     print(output)
 
-    # For pooling models (runner=pooling) only
-    llm = LLM(model=..., runner="pooling")  # Name or path of your model
+    # For pooling models (task={embed,classify,reward,score}) only
+    llm = LLM(model=..., task="embed")  # Name or path of your model
     output = llm.encode("Hello, my name is")
     print(output)
     ```
@@ -280,13 +281,13 @@ And use with `trust_remote_code=True`.
 ```python
 from vllm import LLM
 
-llm = LLM(model=..., revision=..., runner=..., trust_remote_code=True)
+llm = LLM(model=..., revision=..., task=..., trust_remote_code=True)
 
-# For generative models (runner=generate) only
+# For generative models (task=generate) only
 output = llm.generate("Hello, my name is")
 print(output)
 
-# For pooling models (runner=pooling) only
+# For pooling models (task={embed,classify,reward,score}) only
 output = llm.encode("Hello, my name is")
 print(output)
 ```
@@ -311,6 +312,8 @@ See [this page](generative_models.md) for more information on how to use generat
 
 #### Text Generation
 
+Specified using `--task generate`.
+
 <style>
 th {
   white-space: nowrap;
@@ -336,7 +339,7 @@ th {
 | `DeepseekV2ForCausalLM` | DeepSeek-V2 | `deepseek-ai/DeepSeek-V2`, `deepseek-ai/DeepSeek-V2-Chat`, etc. | | ✅︎ | ✅︎ |
 | `DeepseekV3ForCausalLM` | DeepSeek-V3 | `deepseek-ai/DeepSeek-V3-Base`, `deepseek-ai/DeepSeek-V3`, etc. | | ✅︎ | ✅︎ |
 | `Dots1ForCausalLM` | dots.llm1 | `rednote-hilab/dots.llm1.base`, `rednote-hilab/dots.llm1.inst`, etc. | | ✅︎ | ✅︎ |
-| `Ernie4_5ForCausalLM` | Ernie4.5 | `baidu/ERNIE-4.5-0.3B-PT`, etc. | ✅︎ | ✅︎ | ✅︎ |
+| `Ernie4_5_ForCausalLM` | Ernie4.5 | `baidu/ERNIE-4.5-0.3B-PT`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `Ernie4_5_MoeForCausalLM` | Ernie4.5MoE | `baidu/ERNIE-4.5-21B-A3B-PT`, `baidu/ERNIE-4.5-300B-A47B-PT`, etc. |✅︎| ✅︎ | ✅︎ |
 | `ExaoneForCausalLM` | EXAONE-3 | `LGAI-EXAONE/EXAONE-3.0-7.8B-Instruct`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `Exaone4ForCausalLM` | EXAONE-4 | `LGAI-EXAONE/EXAONE-4.0-32B`, etc. | ✅︎ | ✅︎ | ✅︎ |
@@ -362,7 +365,6 @@ th {
 | `Grok1ModelForCausalLM` | Grok1 | `hpcai-tech/grok-1`. | ✅︎ | ✅︎ | ✅︎ |
 | `HunYuanDenseV1ForCausalLM` | Hunyuan-7B-Instruct-0124 | `tencent/Hunyuan-7B-Instruct-0124` | ✅︎ | | ✅︎ |
 | `HunYuanMoEV1ForCausalLM` | Hunyuan-80B-A13B | `tencent/Hunyuan-A13B-Instruct`, `tencent/Hunyuan-A13B-Pretrain`, `tencent/Hunyuan-A13B-Instruct-FP8`, etc. | ✅︎ | | ✅︎ |
-| `HCXVisionForCausalLM` | HyperCLOVAX-SEED-Vision-Instruct-3B | `naver-hyperclovax/HyperCLOVAX-SEED-Vision-Instruct-3B` | | | ✅︎ |
 | `InternLMForCausalLM` | InternLM | `internlm/internlm-7b`, `internlm/internlm-chat-7b`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `InternLM2ForCausalLM` | InternLM2 | `internlm/internlm2-7b`, `internlm/internlm2-chat-7b`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `InternLM3ForCausalLM` | InternLM3 | `internlm/internlm3-8b-instruct`, etc. | ✅︎ | ✅︎ | ✅︎ |
@@ -389,7 +391,7 @@ th {
 | `PhiMoEForCausalLM` | Phi-3.5-MoE | `microsoft/Phi-3.5-MoE-instruct`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `Phi4FlashForCausalLM` | Phi-4-mini-flash-reasoning | `microsoft/microsoft/Phi-4-mini-instruct`, etc. | | | |
 | `PersimmonForCausalLM` | Persimmon | `adept/persimmon-8b-base`, `adept/persimmon-8b-chat`, etc. | | ✅︎ | ✅︎ |
-| `Plamo2ForCausalLM` | PLaMo2 | `pfnet/plamo-2-1b`, `pfnet/plamo-2-8b`, etc. | | ✅︎ | |
+| `Plamo2ForCausalLM` | PLaMo2 | `pfnet/plamo-2-1b`, `pfnet/plamo-2-8b`, etc. | | | |
 | `QWenLMHeadModel` | Qwen | `Qwen/Qwen-7B`, `Qwen/Qwen-7B-Chat`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `Qwen2ForCausalLM` | QwQ, Qwen2 | `Qwen/QwQ-32B-Preview`, `Qwen/Qwen2-7B-Instruct`, `Qwen/Qwen2-7B`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `Qwen2MoeForCausalLM` | Qwen2MoE | `Qwen/Qwen1.5-MoE-A2.7B`, `Qwen/Qwen1.5-MoE-A2.7B-Chat`, etc. | ✅︎ | ✅︎ | ✅︎ |
@@ -417,27 +419,25 @@ See [this page](./pooling_models.md) for more information on how to use pooling
 
 !!! important
     Since some model architectures support both generative and pooling tasks,
-    you should explicitly specify `--runner pooling` to ensure that the model is used in pooling mode instead of generative mode.
+    you should explicitly specify the task type to ensure that the model is used in pooling mode instead of generative mode.
 
 #### Text Embedding
 
+Specified using `--task embed`.
+
 | Architecture | Models | Example HF Models | [LoRA](../features/lora.md) | [PP](../serving/distributed_serving.md) | [V1](gh-issue:8779) |
 |--------------|--------|-------------------|----------------------|---------------------------|---------------------|
-| `BertModel`<sup>C</sup> | BERT-based | `BAAI/bge-base-en-v1.5`, `Snowflake/snowflake-arctic-embed-xs`, etc. | | | |
-| `Gemma2Model`<sup>C</sup> | Gemma 2-based | `BAAI/bge-multilingual-gemma2`, etc. | ✅︎ | | ✅︎ |
+| `BertModel` | BERT-based | `BAAI/bge-base-en-v1.5`, `Snowflake/snowflake-arctic-embed-xs`, etc. | | | |
+| `Gemma2Model` | Gemma 2-based | `BAAI/bge-multilingual-gemma2`, etc. | ✅︎ | | ✅︎ |
 | `GritLM` | GritLM | `parasail-ai/GritLM-7B-vllm`. | ✅︎ | ✅︎ | |
-| `GteModel`<sup>C</sup> | Arctic-Embed-2.0-M | `Snowflake/snowflake-arctic-embed-m-v2.0`. |  |  |  |
-| `GteNewModel`<sup>C</sup> | mGTE-TRM (see note) | `Alibaba-NLP/gte-multilingual-base`, etc. |  |  |  |
-| `ModernBertModel`<sup>C</sup> | ModernBERT-based | `Alibaba-NLP/gte-modernbert-base`, etc. |  |  |  |
-| `NomicBertModel`<sup>C</sup> | Nomic BERT | `nomic-ai/nomic-embed-text-v1`, `nomic-ai/nomic-embed-text-v2-moe`, `Snowflake/snowflake-arctic-embed-m-long`, etc. |  |  |  |
-| `LlamaModel`<sup>C</sup>, `LlamaForCausalLM`<sup>C</sup>, `MistralModel`<sup>C</sup>, etc. | Llama-based | `intfloat/e5-mistral-7b-instruct`, etc. | ✅︎ | ✅︎ | ✅︎ |
-| `Qwen2Model`<sup>C</sup>, `Qwen2ForCausalLM`<sup>C</sup> | Qwen2-based | `ssmits/Qwen2-7B-Instruct-embed-base` (see note), `Alibaba-NLP/gte-Qwen2-7B-instruct` (see note), etc. | ✅︎ | ✅︎ | ✅︎ |
-| `Qwen3Model`<sup>C</sup>, `Qwen3ForCausalLM`<sup>C</sup> | Qwen3-based | `Qwen/Qwen3-Embedding-0.6B`, etc. | ✅︎ | ✅︎ | ✅︎ |
+| `GteModel` | Arctic-Embed-2.0-M | `Snowflake/snowflake-arctic-embed-m-v2.0`. |  |  |  |
+| `GteNewModel` | mGTE-TRM (see note) | `Alibaba-NLP/gte-multilingual-base`, etc. |  |  |  |
+| `ModernBertModel` | ModernBERT-based | `Alibaba-NLP/gte-modernbert-base`, etc. |  |  |  |
+| `NomicBertModel` | Nomic BERT | `nomic-ai/nomic-embed-text-v1`, `nomic-ai/nomic-embed-text-v2-moe`, `Snowflake/snowflake-arctic-embed-m-long`, etc. |  |  |  |
+| `LlamaModel`, `LlamaForCausalLM`, `MistralModel`, etc. | Llama-based | `intfloat/e5-mistral-7b-instruct`, etc. | ✅︎ | ✅︎ | ✅︎ |
+| `Qwen2Model`, `Qwen2ForCausalLM` | Qwen2-based | `ssmits/Qwen2-7B-Instruct-embed-base` (see note), `Alibaba-NLP/gte-Qwen2-7B-instruct` (see note), etc. | ✅︎ | ✅︎ | ✅︎ |
+| `Qwen3Model`, `Qwen3ForCausalLM` | Qwen3-based | `Qwen/Qwen3-Embedding-0.6B`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `RobertaModel`, `RobertaForMaskedLM` | RoBERTa-based | `sentence-transformers/all-roberta-large-v1`, etc. | | | |
-| `*Model`<sup>C</sup>, `*ForCausalLM`<sup>C</sup>, etc. | Generative models | N/A | \* | \* | \* |
-
-<sup>C</sup> Automatically converted into an embedding model via `--convert embed`. ([details](./pooling_models.md#model-conversion))  
-\* Feature support is the same as that of the original model.
 
 !!! note
     `ssmits/Qwen2-7B-Instruct-embed-base` has an improperly defined Sentence Transformers config.
@@ -459,16 +459,14 @@ of the whole prompt are extracted from the normalized hidden state corresponding
 
 #### Reward Modeling
 
+Specified using `--task reward`.
+
 | Architecture | Models | Example HF Models | [LoRA](../features/lora.md) | [PP](../serving/distributed_serving.md) | [V1](gh-issue:8779) |
 |--------------|--------|-------------------|----------------------|---------------------------|---------------------|
 | `InternLM2ForRewardModel` | InternLM2-based | `internlm/internlm2-1_8b-reward`, `internlm/internlm2-7b-reward`, etc. | ✅︎ | ✅︎ | ✅︎ |
-| `LlamaForCausalLM`<sup>C</sup> | Llama-based | `peiyi9979/math-shepherd-mistral-7b-prm`, etc. | ✅︎ | ✅︎ | ✅︎ |
+| `LlamaForCausalLM` | Llama-based | `peiyi9979/math-shepherd-mistral-7b-prm`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `Qwen2ForRewardModel` | Qwen2-based | `Qwen/Qwen2.5-Math-RM-72B`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `Qwen2ForProcessRewardModel` | Qwen2-based | `Qwen/Qwen2.5-Math-PRM-7B`, etc. | ✅︎ | ✅︎ | ✅︎ |
-| `*Model`<sup>C</sup>, `*ForCausalLM`<sup>C</sup>, etc. | Generative models | N/A | \* | \* | \* |
-
-<sup>C</sup> Automatically converted into a reward model via `--convert reward`. ([details](./pooling_models.md#model-conversion))  
-\* Feature support is the same as that of the original model.
 
 If your model is not in the above list, we will try to automatically convert the model using
 [as_reward_model][vllm.model_executor.models.adapters.as_reward_model]. By default, we return the hidden states of each token directly.
@@ -479,31 +477,28 @@ If your model is not in the above list, we will try to automatically convert the
 
 #### Classification
 
+Specified using `--task classify`.
+
 | Architecture | Models | Example HF Models | [LoRA](../features/lora.md) | [PP](../serving/distributed_serving.md) | [V1](gh-issue:8779) |
 |--------------|--------|-------------------|----------------------|---------------------------|---------------------|
 | `JambaForSequenceClassification` | Jamba | `ai21labs/Jamba-tiny-reward-dev`, etc. | ✅︎ | ✅︎ | |
 | `GPT2ForSequenceClassification` | GPT2 | `nie3e/sentiment-polish-gpt2-small` | | | ✅︎ |
-| `*Model`<sup>C</sup>, `*ForCausalLM`<sup>C</sup>, etc. | Generative models | N/A | \* | \* | \* |
-
-<sup>C</sup> Automatically converted into a classification model via `--convert classify`. ([details](./pooling_models.md#model-conversion))  
-\* Feature support is the same as that of the original model.
 
 If your model is not in the above list, we will try to automatically convert the model using
 [as_seq_cls_model][vllm.model_executor.models.adapters.as_seq_cls_model]. By default, the class probabilities are extracted from the softmaxed hidden state corresponding to the last token.
 
 #### Sentence Pair Scoring
 
-| Architecture | Models | Example HF Models | [LoRA](../features/lora.md) | [PP](../serving/distributed_serving.md) | [V1](gh-issue:8779) |
-|--------------|--------|-------------------|----------------------|---------------------------|---------------------|
-| `BertForSequenceClassification` | BERT-based | `cross-encoder/ms-marco-MiniLM-L-6-v2`, etc. | | | |
-| `GemmaForSequenceClassification` | Gemma-based | `BAAI/bge-reranker-v2-gemma` (see note), etc. | ✅︎ | ✅︎ | ✅︎ |
-| `Qwen2ForSequenceClassification` | Qwen2-based | `mixedbread-ai/mxbai-rerank-base-v2` (see note), etc. | ✅︎ | ✅︎ | ✅︎ |
-| `Qwen3ForSequenceClassification` | Qwen3-based | `tomaarsen/Qwen3-Reranker-0.6B-seq-cls`, `Qwen/Qwen3-Reranker-0.6B` (see note), etc. | ✅︎ | ✅︎ | ✅︎ |
-| `RobertaForSequenceClassification` | RoBERTa-based | `cross-encoder/quora-roberta-base`, etc. | | | |
-| `XLMRobertaForSequenceClassification` | XLM-RoBERTa-based | `BAAI/bge-reranker-v2-m3`, etc. | | | |
+Specified using `--task score`.
 
-<sup>C</sup> Automatically converted into a classification model via `--convert classify`. ([details](./pooling_models.md#model-conversion))  
-\* Feature support is the same as that of the original model.
+| Architecture | Models | Example HF Models | [V1](gh-issue:8779) |
+|--------------|--------|-------------------|---------------------|
+| `BertForSequenceClassification` | BERT-based | `cross-encoder/ms-marco-MiniLM-L-6-v2`, etc. | |
+| `GemmaForSequenceClassification` | Gemma-based | `BAAI/bge-reranker-v2-gemma` (see note), etc. | |
+| `Qwen2ForSequenceClassification` | Qwen2-based | `mixedbread-ai/mxbai-rerank-base-v2` (see note), etc. | ✅︎ |
+| `Qwen3ForSequenceClassification` | Qwen3-based | `tomaarsen/Qwen3-Reranker-0.6B-seq-cls`, `Qwen/Qwen3-Reranker-0.6B` (see note), etc. | ✅︎ |
+| `RobertaForSequenceClassification` | RoBERTa-based | `cross-encoder/quora-roberta-base`, etc. | |
+| `XLMRobertaForSequenceClassification` | XLM-RoBERTa-based | `BAAI/bge-reranker-v2-m3`, etc. | |
 
 !!! note
     Load the official original `BAAI/bge-reranker-v2-gemma` by using the following command.
@@ -579,6 +574,8 @@ See [this page](generative_models.md) for more information on how to use generat
 
 #### Text Generation
 
+Specified using `--task generate`.
+
 | Architecture | Models | Inputs | Example HF Models | [LoRA](../features/lora.md) | [PP](../serving/distributed_serving.md) | [V1](gh-issue:8779) |
 |--------------|--------|--------|-------------------|----------------------|---------------------------|---------------------|
 | `AriaForConditionalGeneration` | Aria | T + I<sup>+</sup> | `rhymes-ai/Aria` | | | ✅︎ |
@@ -595,7 +592,6 @@ See [this page](generative_models.md) for more information on how to use generat
 | `GraniteSpeechForConditionalGeneration` | Granite Speech | T + A | `ibm-granite/granite-speech-3.3-8b` | ✅︎ | ✅︎ | ✅︎ |
 | `H2OVLChatModel` | H2OVL | T + I<sup>E+</sup> | `h2oai/h2ovl-mississippi-800m`, `h2oai/h2ovl-mississippi-2b`, etc. | | ✅︎ | ✅︎ |
 | `Idefics3ForConditionalGeneration` | Idefics3 | T + I | `HuggingFaceM4/Idefics3-8B-Llama3`, etc. | ✅︎ | | ✅︎ |
-| `InternS1ForConditionalGeneration` | Intern-S1 | T + I<sup>E+</sup> + V<sup>E+</sup> | `internlm/Intern-S1`, etc. | | ✅︎ | ✅︎ |
 | `InternVLChatModel` | InternVL 3.0, InternVideo 2.5, InternVL 2.5, Mono-InternVL, InternVL 2.0 | T + I<sup>E+</sup> + (V<sup>E+</sup>) | `OpenGVLab/InternVL3-9B`, `OpenGVLab/InternVideo2_5_Chat_8B`, `OpenGVLab/InternVL2_5-4B`, `OpenGVLab/Mono-InternVL-2B`, `OpenGVLab/InternVL2-4B`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `KeyeForConditionalGeneration` | Keye-VL-8B-Preview | T + I<sup>E+</sup> + V<sup>E+</sup> | `Kwai-Keye/Keye-VL-8B-Preview` | | | ✅︎ |
 | `KimiVLForConditionalGeneration` | Kimi-VL-A3B-Instruct, Kimi-VL-A3B-Thinking | T + I<sup>+</sup> | `moonshotai/Kimi-VL-A3B-Instruct`, `moonshotai/Kimi-VL-A3B-Thinking` | | | ✅︎ |
@@ -616,7 +612,6 @@ See [this page](generative_models.md) for more information on how to use generat
 | `PaliGemmaForConditionalGeneration` | PaliGemma, PaliGemma 2 | T + I<sup>E</sup> | `google/paligemma-3b-pt-224`, `google/paligemma-3b-mix-224`, `google/paligemma2-3b-ft-docci-448`, etc. | | ✅︎ | ⚠️ |
 | `Phi3VForCausalLM` | Phi-3-Vision, Phi-3.5-Vision | T + I<sup>E+</sup> | `microsoft/Phi-3-vision-128k-instruct`, `microsoft/Phi-3.5-vision-instruct`, etc. | | ✅︎ | ✅︎ |
 | `Phi4MMForCausalLM` | Phi-4-multimodal | T + I<sup>+</sup> / T + A<sup>+</sup> / I<sup>+</sup> + A<sup>+</sup> | `microsoft/Phi-4-multimodal-instruct`, etc. | ✅︎ | ✅︎ | ✅︎ |
-| `Phi4MultimodalForCausalLM` | Phi-4-multimodal (HF Transformers) | T + I<sup>+</sup> / T + A<sup>+</sup> / I<sup>+</sup> + A<sup>+</sup> | `microsoft/Phi-4-multimodal-instruct` (with revision `refs/pr/70`), etc. | ✅︎ | ✅︎ | ✅︎ |
 | `PixtralForConditionalGeneration` | Mistral 3 (Mistral format), Pixtral (Mistral format) | T + I<sup>+</sup> | `mistralai/Mistral-Small-3.1-24B-Instruct-2503`, `mistralai/Pixtral-12B-2409`, etc. | | ✅︎ | ✅︎ |
 | `QwenVLForConditionalGeneration`<sup>^</sup> | Qwen-VL | T + I<sup>E+</sup> | `Qwen/Qwen-VL`, `Qwen/Qwen-VL-Chat`, etc. | ✅︎ | ✅︎ | ✅︎ |
 | `Qwen2AudioForConditionalGeneration` | Qwen2-Audio | T + A<sup>+</sup> | `Qwen/Qwen2-Audio-7B-Instruct` | | ✅︎ | ✅︎ |
@@ -628,16 +623,10 @@ See [this page](generative_models.md) for more information on how to use generat
 | `TarsierForConditionalGeneration` | Tarsier | T + I<sup>E+</sup> | `omni-search/Tarsier-7b`, `omni-search/Tarsier-34b` | | ✅︎ | ✅︎ |
 | `Tarsier2ForConditionalGeneration`<sup>^</sup> | Tarsier2 | T + I<sup>E+</sup> + V<sup>E+</sup> | `omni-research/Tarsier2-Recap-7b`, `omni-research/Tarsier2-7b-0115` | | ✅︎ | ✅︎ |
 
-Some models are supported only via the [Transformers backend](#transformers). The purpose of the table below is to acknowledge models which we officially support in this way. The logs will say that the Transformers backend is being used, and you will see no warning that this is fallback behaviour. This means that, if you have issues with any of the models listed below, please [make an issue](https://github.com/vllm-project/vllm/issues/new/choose) and we'll do our best to fix it!
-
-| Architecture | Models | Inputs | Example HF Models | [LoRA](../features/lora.md) | [PP](../serving/distributed_serving.md) | [V1](gh-issue:8779) |
-|--------------|--------|--------|-------------------|-----------------------------|-----------------------------------------|---------------------|
-| `Emu3ForConditionalGeneration` | Emu3 | T + I | `BAAI/Emu3-Chat-hf` | ✅︎ | ✅︎ | ✅︎ |
-
-<sup>^</sup> You need to set the architecture name via `--hf-overrides` to match the one in vLLM.
-&nbsp;&nbsp;&nbsp;&nbsp;• For example, to use DeepSeek-VL2 series models:
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;`--hf-overrides '{"architectures": ["DeepseekVLV2ForCausalLM"]}'`
-<sup>E</sup> Pre-computed embeddings can be inputted for this modality.
+<sup>^</sup> You need to set the architecture name via `--hf-overrides` to match the one in vLLM.  
+&nbsp;&nbsp;&nbsp;&nbsp;• For example, to use DeepSeek-VL2 series models:  
+&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;`--hf-overrides '{"architectures": ["DeepseekVLV2ForCausalLM"]}'`  
+<sup>E</sup> Pre-computed embeddings can be inputted for this modality.  
 <sup>+</sup> Multiple items can be inputted per text prompt for this modality.
 
 !!! warning
@@ -707,6 +696,8 @@ Some models are supported only via the [Transformers backend](#transformers). Th
 
 #### Transcription
 
+Specified using `--task transcription`.
+
 Speech2Text models trained specifically for Automatic Speech Recognition.
 
 | Architecture | Models | Example HF Models | [LoRA](../features/lora.md) | [PP](../serving/distributed_serving.md) | [V1](gh-issue:8779) |
@@ -719,10 +710,14 @@ See [this page](./pooling_models.md) for more information on how to use pooling
 
 !!! important
     Since some model architectures support both generative and pooling tasks,
-    you should explicitly specify `--runner pooling` to ensure that the model is used in pooling mode instead of generative mode.
+    you should explicitly specify the task type to ensure that the model is used in pooling mode instead of generative mode.
 
 #### Text Embedding
 
+Specified using `--task embed`.
+
+Any text generation model can be converted into an embedding model by passing `--task embed`.
+
 !!! note
     To get the best results, you should use pooling models that are specifically trained as such.
 
@@ -730,24 +725,19 @@ The following table lists those that are tested in vLLM.
 
 | Architecture | Models | Inputs | Example HF Models | [LoRA](../features/lora.md) | [PP](../serving/distributed_serving.md) | [V1](gh-issue:8779) |
 |--------------|--------|--------|-------------------|----------------------|---------------------------|---------------------|
-| `LlavaNextForConditionalGeneration`<sup>C</sup> | LLaVA-NeXT-based | T / I | `royokong/e5-v` | | | |
-| `Phi3VForCausalLM`<sup>C</sup> | Phi-3-Vision-based | T + I | `TIGER-Lab/VLM2Vec-Full` | 🚧 | ✅︎ | |
-| `*ForConditionalGeneration`<sup>C</sup>, `*ForCausalLM`<sup>C</sup>, etc. | Generative models | \* | N/A | \* | \* | \* |
-
-<sup>C</sup> Automatically converted into an embedding model via `--convert embed`. ([details](./pooling_models.md#model-conversion))  
-\* Feature support is the same as that of the original model.
+| `LlavaNextForConditionalGeneration` | LLaVA-NeXT-based | T / I | `royokong/e5-v` | | | |
+| `Phi3VForCausalLM` | Phi-3-Vision-based | T + I | `TIGER-Lab/VLM2Vec-Full` | 🚧 | ✅︎ | |
 
 ---
 
 #### Scoring
 
+Specified using `--task score`.
+
 | Architecture                        | Models             | Inputs   | Example HF Models        | [LoRA][lora-adapter]   | [PP][distributed-serving]   | [V1](gh-issue:8779)   |
 |-------------------------------------|--------------------|----------|--------------------------|------------------------|-----------------------------|-----------------------|
 | `JinaVLForSequenceClassification` | JinaVL-based | T + I<sup>E+</sup> | `jinaai/jina-reranker-m0`, etc. | | | ✅︎ |
 
-<sup>C</sup> Automatically converted into a classification model via `--convert classify`. ([details](./pooling_models.md#model-conversion))  
-\* Feature support is the same as that of the original model.
-
 ## Model Support Policy
 
 At vLLM, we are committed to facilitating the integration and support of third-party models within our ecosystem. Our approach is designed to balance the need for robustness and the practical limitations of supporting a wide range of models. Here’s how we manage third-party model support:

docs/serving/distributed_serving.md

@@ -1,38 +1,31 @@
-# Distributed inference and serving
+# Distributed Inference and Serving
 
-## Distributed inference strategies for a single-model replica
+## How to decide the distributed inference strategy?
 
-To choose a distributed inference strategy for a single-model replica, use the following guidelines:
+Before going into the details of distributed inference and serving, let's first make it clear when to use distributed inference and what are the strategies available. The common practice is:
 
-- **Single GPU (no distributed inference):** if the model fits on a single GPU, distributed inference is probably unnecessary. Run inference on that GPU.
-- **Single-node multi-GPU using tensor parallel inference:** if the model is too large for a single GPU but fits on a single node with multiple GPUs, use *tensor parallelism*. For example, set `tensor_parallel_size=4` when using a node with 4 GPUs.
-- **Multi-node multi-GPU using tensor parallel and pipeline parallel inference:** if the model is too large for a single node, combine *tensor parallelism* with *pipeline parallelism*. Set `tensor_parallel_size` to the number of GPUs per node and `pipeline_parallel_size` to the number of nodes. For example, set `tensor_parallel_size=8` and `pipeline_parallel_size=2` when using 2 nodes with 8 GPUs per node.
+- **Single GPU (no distributed inference)**: If your model fits in a single GPU, you probably don't need to use distributed inference. Just use the single GPU to run the inference.
+- **Single-Node Multi-GPU (tensor parallel inference)**: If your model is too large to fit in a single GPU, but it can fit in a single node with multiple GPUs, you can use tensor parallelism. The tensor parallel size is the number of GPUs you want to use. For example, if you have 4 GPUs in a single node, you can set the tensor parallel size to 4.
+- **Multi-Node Multi-GPU (tensor parallel plus pipeline parallel inference)**: If your model is too large to fit in a single node, you can use tensor parallel together with pipeline parallelism. The tensor parallel size is the number of GPUs you want to use in each node, and the pipeline parallel size is the number of nodes you want to use. For example, if you have 16 GPUs in 2 nodes (8 GPUs per node), you can set the tensor parallel size to 8 and the pipeline parallel size to 2.
 
-Increase the number of GPUs and nodes until there is enough GPU memory for the model. Set `tensor_parallel_size` to the number of GPUs per node and `pipeline_parallel_size` to the number of nodes.
+In short, you should increase the number of GPUs and the number of nodes until you have enough GPU memory to hold the model. The tensor parallel size should be the number of GPUs in each node, and the pipeline parallel size should be the number of nodes.
 
-After you provision sufficient resources to fit the model, run `vllm`. Look for log messages like:
+After adding enough GPUs and nodes to hold the model, you can run vLLM first, which will print some logs like `# GPU blocks: 790`. Multiply the number by `16` (the block size), and you can get roughly the maximum number of tokens that can be served on the current configuration. If this number is not satisfying, e.g. you want higher throughput, you can further increase the number of GPUs or nodes, until the number of blocks is enough.
 
-```text
-INFO 07-23 13:56:04 [kv_cache_utils.py:775] GPU KV cache size: 643,232 tokens
-INFO 07-23 13:56:04 [kv_cache_utils.py:779] Maximum concurrency for 40,960 tokens per request: 15.70x
-```
+!!! note
+    There is one edge case: if the model fits in a single node with multiple GPUs, but the number of GPUs cannot divide the model size evenly, you can use pipeline parallelism, which splits the model along layers and supports uneven splits. In this case, the tensor parallel size should be 1 and the pipeline parallel size should be the number of GPUs.
 
-The `GPU KV cache size` line reports the total number of tokens that can be stored in the GPU KV cache at once. The `Maximum concurrency` line provides an estimate of how many requests can be served concurrently if each request requires the specified number of tokens (40,960 in the example above). The tokens-per-request number is taken from the model configuration's maximum sequence length, `ModelConfig.max_model_len`. If these numbers are lower than your throughput requirements, add more GPUs or nodes to your cluster.
+### Distributed serving of MoE (Mixture of Experts) models
 
-!!! note "Edge case: uneven GPU splits"
-    If the model fits within a single node but the GPU count doesn't evenly divide the model size, enable pipeline parallelism, which splits the model along layers and supports uneven splits. In this scenario, set `tensor_parallel_size=1` and `pipeline_parallel_size` to the number of GPUs. Furthermore, if the GPUs on the node do not have NVLINK interconnect (e.g. L40S), leverage pipeline parallelism instead of tensor parallelism for higher throughput and lower communication overhead.
+It is often advantageous to exploit the inherent parallelism of experts by using a separate parallelism strategy for the expert layers. vLLM supports large-scale deployment combining Data Parallel attention with Expert or Tensor Parallel MoE layers. See the page on [Data Parallel Deployment](data_parallel_deployment.md) for more information.
 
-### Distributed serving of *Mixture of Experts* (*MoE*) models
+## Running vLLM on a single node
 
-It's often advantageous to exploit the inherent parallelism of experts by using a separate parallelism strategy for the expert layers. vLLM supports large-scale deployment combining Data Parallel attention with Expert or Tensor Parallel MoE layers. For more information, see [Data Parallel Deployment](data_parallel_deployment.md).
+vLLM supports distributed tensor-parallel and pipeline-parallel inference and serving. Currently, we support [Megatron-LM's tensor parallel algorithm](https://arxiv.org/pdf/1909.08053.pdf). We manage the distributed runtime with either [Ray](https://github.com/ray-project/ray) or python native multiprocessing. Multiprocessing can be used when deploying on a single node, multi-node inference currently requires Ray.
 
-## Single-node deployment
+Multiprocessing will be used by default when not running in a Ray placement group and if there are sufficient GPUs available on the same node for the configured `tensor_parallel_size`, otherwise Ray will be used. This default can be overridden via the `LLM` class `distributed_executor_backend` argument or `--distributed-executor-backend` API server argument. Set it to `mp` for multiprocessing or `ray` for Ray. It's not required for Ray to be installed for the multiprocessing case.
 
-vLLM supports distributed tensor-parallel and pipeline-parallel inference and serving. The implementation includes [Megatron-LM's tensor parallel algorithm](https://arxiv.org/pdf/1909.08053.pdf).
-
-The default distributed runtimes are [Ray](https://github.com/ray-project/ray) for multi-node inference and native Python `multiprocessing` for single-node inference. You can override the defaults by setting `distributed_executor_backend` in the `LLM` class or `--distributed-executor-backend` in the API server. Use `mp` for `multiprocessing` or `ray` for Ray.
-
-For multi-GPU inference, set `tensor_parallel_size` in the `LLM` class to the desired GPU count. For example, to run inference on 4 GPUs:
+To run multi-GPU inference with the `LLM` class, set the `tensor_parallel_size` argument to the number of GPUs you want to use. For example, to run inference on 4 GPUs:
 
 ```python
 from vllm import LLM
@@ -40,96 +33,84 @@ llm = LLM("facebook/opt-13b", tensor_parallel_size=4)
 output = llm.generate("San Francisco is a")
 ```
 
-For multi-GPU serving, include `--tensor-parallel-size` when starting the server. For example, to run the API server on 4 GPUs:
+To run multi-GPU serving, pass in the `--tensor-parallel-size` argument when starting the server. For example, to run API server on 4 GPUs:
 
 ```bash
 vllm serve facebook/opt-13b \
      --tensor-parallel-size 4
 ```
 
-To enable pipeline parallelism, add `--pipeline-parallel-size`. For example, to run the API server on 8 GPUs with pipeline parallelism and tensor parallelism:
+You can also additionally specify `--pipeline-parallel-size` to enable pipeline parallelism. For example, to run API server on 8 GPUs with pipeline parallelism and tensor parallelism:
 
 ```bash
-# Eight GPUs total
 vllm serve gpt2 \
      --tensor-parallel-size 4 \
      --pipeline-parallel-size 2
 ```
 
-## Multi-node deployment
+## Running vLLM on multiple nodes
 
-If a single node lacks sufficient GPUs to hold the model, deploy vLLM across multiple nodes. Multi-node deployments require Ray as the runtime engine. Ensure that every node provides an identical execution environment, including the model path and Python packages. Using container images is recommended because they provide a convenient way to keep environments consistent and to hide host heterogeneity.
+If a single node does not have enough GPUs to hold the model, you can run the model using multiple nodes. It is important to make sure the execution environment is the same on all nodes, including the model path, the Python environment. The recommended way is to use docker images to ensure the same environment, and hide the heterogeneity of the host machines via mapping them into the same docker configuration.
 
-### Ray cluster setup with containers
+The first step, is to start containers and organize them into a cluster. We have provided the helper script <gh-file:examples/online_serving/run_cluster.sh> to start the cluster. Please note, this script launches docker without administrative privileges that would be required to access GPU performance counters when running profiling and tracing tools. For that purpose, the script can have `CAP_SYS_ADMIN` to the docker container by using the `--cap-add` option in the docker run command.
 
-The helper script <gh-file:examples/online_serving/run_cluster.sh> starts containers across nodes and initializes Ray. By default, the script runs Docker without administrative privileges, which prevents access to the GPU performance counters when profiling or tracing. To enable admin privileges, add the `--cap-add=CAP_SYS_ADMIN` flag to the Docker command.
-
-Choose one node as the head node and run:
+Pick a node as the head node, and run the following command:
 
 ```bash
 bash run_cluster.sh \
                 vllm/vllm-openai \
-                <HEAD_NODE_IP> \
+                ip_of_head_node \
                 --head \
                 /path/to/the/huggingface/home/in/this/node \
-                -e VLLM_HOST_IP=<HEAD_NODE_IP>
+                -e VLLM_HOST_IP=ip_of_this_node
 ```
 
-On each worker node, run:
+On the rest of the worker nodes, run the following command:
 
 ```bash
 bash run_cluster.sh \
                 vllm/vllm-openai \
-                <HEAD_NODE_IP> \
+                ip_of_head_node \
                 --worker \
                 /path/to/the/huggingface/home/in/this/node \
-                -e VLLM_HOST_IP=<WORKER_NODE_IP>
+                -e VLLM_HOST_IP=ip_of_this_node
 ```
 
-Note that `VLLM_HOST_IP` is unique for each worker. Keep the shells running these commands open; closing any shell terminates the cluster. Ensure that all nodes can communicate with each other through their IP addresses.
+Then you get a ray cluster of **containers**. Note that you need to keep the shells running these commands alive to hold the cluster. Any shell disconnect will terminate the cluster. In addition, please note that the argument `ip_of_head_node` should be the IP address of the head node, which is accessible by all the worker nodes. The IP addresses of each worker node should be specified in the `VLLM_HOST_IP` environment variable, and should be different for each worker node. Please check the network configuration of your cluster to make sure the nodes can communicate with each other through the specified IP addresses.
 
-!!! warning "Network security"
-    For security, set `VLLM_HOST_IP` to an address on a private network segment. Traffic sent over this network is unencrypted, and the endpoints exchange data in a format that can be exploited to execute arbitrary code if an adversary gains network access. Ensure that untrusted parties cannot reach the network.
+!!! warning
+    It is considered best practice to set `VLLM_HOST_IP` to an address on a private network segment for the vLLM cluster. The traffic sent here is not encrypted. The endpoints are also exchanging data in a format that could be exploited to execute arbitrary code should a malicious party gain access to the network. Please ensure that this network is not reachable by any untrusted parties.
 
-From any node, enter a container and run `ray status` and `ray list nodes` to verify that Ray finds the expected number of nodes and GPUs.
+!!! warning
+    Since this is a ray cluster of **containers**, all the following commands should be executed in the **containers**, otherwise you are executing the commands on the host machine, which is not connected to the ray cluster. To enter the container, you can use `docker exec -it node /bin/bash`.
 
-!!! tip
-    Alternatively, set up the Ray cluster using KubeRay. For more information, see [KubeRay vLLM documentation](https://docs.ray.io/en/latest/cluster/kubernetes/examples/vllm-rayservice.html).
+Then, on any node, use `docker exec -it node /bin/bash` to enter the container, execute `ray status` and `ray list nodes` to check the status of the Ray cluster. You should see the right number of nodes and GPUs.
 
-### Running vLLM on a Ray cluster
-
-!!! tip
-     If Ray is running inside containers, run the commands in the remainder of this guide _inside the containers_, not on the host. To open a shell inside a container, connect to a node and use `docker exec -it <container_name> /bin/bash`.
-
-Once a Ray cluster is running, use vLLM as you would in a single-node setting. All resources across the Ray cluster are visible to vLLM, so a single `vllm` command on a single node is sufficient.
-
-The common practice is to set the tensor parallel size to the number of GPUs in each node, and the pipeline parallel size to the number of nodes. For example, if you have 16 GPUs across 2 nodes (8 GPUs per node), set the tensor parallel size to 8 and the pipeline parallel size to 2:
+After that, on any node, use `docker exec -it node /bin/bash` to enter the container again. **In the container**, you can use vLLM as usual, just as you have all the GPUs on one node: vLLM will be able to leverage GPU resources of all nodes in the Ray cluster, and therefore, only run the `vllm` command on this node but not other nodes. The common practice is to set the tensor parallel size to the number of GPUs in each node, and the pipeline parallel size to the number of nodes. For example, if you have 16 GPUs in 2 nodes (8 GPUs per node), you can set the tensor parallel size to 8 and the pipeline parallel size to 2:
 
 ```bash
-vllm serve /path/to/the/model/in/the/container \
-    --tensor-parallel-size 8 \
-    --pipeline-parallel-size 2
+ vllm serve /path/to/the/model/in/the/container \
+     --tensor-parallel-size 8 \
+     --pipeline-parallel-size 2
 ```
 
-Alternatively, you can set `tensor_parallel_size` to the total number of GPUs in the cluster:
+You can also use tensor parallel without pipeline parallel, just set the tensor parallel size to the number of GPUs in the cluster. For example, if you have 16 GPUs in 2 nodes (8 GPUs per node), you can set the tensor parallel size to 16:
 
 ```bash
 vllm serve /path/to/the/model/in/the/container \
      --tensor-parallel-size 16
 ```
 
-## Troubleshooting distributed deployments
+To make tensor parallel performant, you should make sure the communication between nodes is efficient, e.g. using high-speed network cards like InfiniBand. To correctly set up the cluster to use InfiniBand, append additional arguments like `--privileged -e NCCL_IB_HCA=mlx5` to the `run_cluster.sh` script. Please contact your system administrator for more information on how to set up the flags. One way to confirm if the InfiniBand is working is to run vLLM with `NCCL_DEBUG=TRACE` environment variable set, e.g. `NCCL_DEBUG=TRACE vllm serve ...` and check the logs for the NCCL version and the network used. If you find `[send] via NET/Socket` in the logs, it means NCCL uses raw TCP Socket, which is not efficient for cross-node tensor parallel. If you find `[send] via NET/IB/GDRDMA` in the logs, it means NCCL uses InfiniBand with GPUDirect RDMA, which is efficient.
 
-To make tensor parallelism performant, ensure that communication between nodes is efficient, for example, by using high-speed network cards such as InfiniBand. To set up the cluster to use InfiniBand, append additional arguments like `--privileged -e NCCL_IB_HCA=mlx5` to the `run_cluster.sh` script. Contact your system administrator for more information about the required flags. One way to confirm if InfiniBand is working is to run `vllm` with the `NCCL_DEBUG=TRACE` environment variable set, for example `NCCL_DEBUG=TRACE vllm serve ...`, and check the logs for the NCCL version and the network used. If you find `[send] via NET/Socket` in the logs, NCCL uses a raw TCP socket, which is not efficient for cross-node tensor parallelism. If you find `[send] via NET/IB/GDRDMA` in the logs, NCCL uses InfiniBand with GPUDirect RDMA, which is efficient.
+### GPUDirect RDMA
 
-## Enabling GPUDirect RDMA
+To enable GPUDirect RDMA with vLLM, specific configuration tweaks are needed. This setup ensures:
 
-To enable GPUDirect RDMA with vLLM, configure the following settings:
+- `IPC_LOCK` Security Context: Add the `IPC_LOCK` capability to the container’s security context to lock memory pages and prevent swapping to disk.
+- Shared Memory with `/dev/shm`: Mount `/dev/shm` in the pod spec to provide shared memory for IPC.
 
-- `IPC_LOCK` security context: add the `IPC_LOCK` capability to the container's security context to lock memory pages and prevent swapping to disk.
-- Shared memory with `/dev/shm`: mount `/dev/shm` in the pod spec to provide shared memory for interprocess communication (IPC).
-
-If you use Docker, set up the container as follows:
+When using Docker, you can set up the container as follows:
 
 ```bash
 docker run --gpus all \
@@ -139,7 +120,7 @@ docker run --gpus all \
     vllm/vllm-openai
 ```
 
-If you use Kubernetes, set up the pod spec as follows:
+When using Kubernetes, you can set up the pod spec as follows:
 
 ```yaml
 ...
@@ -165,21 +146,13 @@ spec:
 ...
 ```
 
-Efficient tensor parallelism requires fast inter-node communication, preferably through high-speed network adapters such as InfiniBand. To enable InfiniBand, append flags such as `--privileged -e NCCL_IB_HCA=mlx5` to `run_cluster.sh`. For cluster-specific settings, consult your system administrator.
+!!! warning
+    After you start the Ray cluster, you'd better also check the GPU-GPU communication between nodes. It can be non-trivial to set up. Please refer to the [sanity check script][troubleshooting-incorrect-hardware-driver] for more information. If you need to set some environment variables for the communication configuration, you can append them to the `run_cluster.sh` script, e.g. `-e NCCL_SOCKET_IFNAME=eth0`. Note that setting environment variables in the shell (e.g. `NCCL_SOCKET_IFNAME=eth0 vllm serve ...`) only works for the processes in the same node, not for the processes in the other nodes. Setting environment variables when you create the cluster is the recommended way. See <gh-issue:6803> for more information.
 
-To confirm InfiniBand operation, enable detailed NCCL logs:
+!!! warning
+    Please make sure you downloaded the model to all the nodes (with the same path), or the model is downloaded to some distributed file system that is accessible by all nodes.
 
-```bash
-NCCL_DEBUG=TRACE vllm serve ...
-```
+    When you use huggingface repo id to refer to the model, you should append your huggingface token to the `run_cluster.sh` script, e.g. `-e HF_TOKEN=`. The recommended way is to download the model first, and then use the path to refer to the model.
 
-Search the logs for the transport method. Entries containing `[send] via NET/Socket` indicate raw TCP sockets, which perform poorly for cross-node tensor parallelism. Entries containing `[send] via NET/IB/GDRDMA` indicate InfiniBand with GPUDirect RDMA, which provides high performance.
-
-!!! tip "Verify inter-node GPU communication"
-    After you start the Ray cluster, verify GPU-to-GPU communication across nodes. Proper configuration can be non-trivial. For more information, see [troubleshooting script][troubleshooting-incorrect-hardware-driver]. If you need additional environment variables for communication configuration, append them to `run_cluster.sh`, for example `-e NCCL_SOCKET_IFNAME=eth0`. Setting environment variables during cluster creation is recommended because the variables propagate to all nodes. In contrast, setting environment variables in the shell affects only the local node. For more information, see <gh-issue:6803>.
-
-!!! tip "Pre-download Hugging Face models"
-    If you use Hugging Face models, downloading the model before starting vLLM is recommended. Download the model on every node to the same path, or store the model on a distributed file system accessible by all nodes. Then pass the path to the model in place of the repository ID. Otherwise, supply a Hugging Face token by appending `-e HF_TOKEN=<TOKEN>` to `run_cluster.sh`.
-
-!!! tip
-    The error message `Error: No available node types can fulfill resource request` can appear even when the cluster has enough GPUs. The issue often occurs when nodes have multiple IP addresses and vLLM can't select the correct one. Ensure that vLLM and Ray use the same IP address by setting `VLLM_HOST_IP` in `run_cluster.sh` (with a different value on each node). Use `ray status` and `ray list nodes` to verify the chosen IP address. For more information, see <gh-issue:7815>.
+!!! warning
+    If you keep receiving the error message `Error: No available node types can fulfill resource request` but you have enough GPUs in the cluster, chances are your nodes have multiple IP addresses and vLLM cannot find the right one, especially when you are using multi-node inference. Please make sure vLLM and ray use the same IP address. You can set the `VLLM_HOST_IP` environment variable to the right IP address in the `run_cluster.sh` script (different for each node!), and check `ray status` and `ray list nodes` to see the IP address used by Ray. See <gh-issue:7815> for more information.

docs/serving/expert_parallel_deployment.md

@@ -1,244 +0,0 @@
-# Expert Parallel Deployment
-
-vLLM supports Expert Parallelism (EP), which allows experts in Mixture-of-Experts (MoE) models to be deployed on separate GPUs, increasing locality, efficiency, and throughput overall.
-
-EP is typically coupled with Data Parallelism (DP). While DP can be used independently of EP, EP is more efficient when used in conjunction with DP. You can read more about data parallelism [here](data_parallel_deployment.md).
-
-## Prerequisites
-
-Before using EP, you need to install the necessary dependencies. We are actively working on making this easier in the future:
-
-1. **Install DeepEP and pplx-kernels**: Set up host environment following vLLM's guide for EP kernels [here](gh-file:tools/ep_kernels).
-2. **Install DeepGEMM library**: Follow the [official instructions](https://github.com/deepseek-ai/DeepGEMM#installation).
-3. **For disaggregated serving**: Install UCX and NIXL following the [script](gh-file:tools/install_nixl.sh).
-
-### Backend Selection Guide
-
-vLLM provides three communication backends for EP:
-
-| Backend | Use Case | Features | Best For |
-|---------|----------|----------|----------|
-| `pplx` | Single node | Chunked prefill support | Development, best for intra-node deployments |
-| `deepep_high_throughput` | Multi-node prefill | Grouped GEMM with continuous layout | High-throughput scenarios, prefill-dominated workloads |
-| `deepep_low_latency` | Multi-node decode | CUDA graph support, masked layout | Low-latency scenarios, decode-dominated workloads |
-
-## Single Node Deployment
-
-!!! warning
-    EP is an experimental feature. Argument names and default values may change in the future.
-
-### Configuration
-
-Enable EP by setting the `--enable-expert-parallel` flag. The EP size is automatically calculated as:
-
-```
-EP_SIZE = TP_SIZE × DP_SIZE
-```
-
-Where:
-- `TP_SIZE`: Tensor parallel size (always 1 for now)
-- `DP_SIZE`: Data parallel size
-- `EP_SIZE`: Expert parallel size (computed automatically)
-
-### Example Command
-
-The following command serves a `DeepSeek-V3-0324` model with 1-way tensor parallel, 8-way (attention) data parallel, and 8-way expert parallel. The attention weights are replicated across all GPUs, while the expert weights are split across GPUs. It will work on a H200 (or H20) node with 8 GPUs. For H100, you can try to serve a smaller model or refer to the multi-node deployment section.
-
-```bash
-# Single node EP deployment with pplx backend
-VLLM_ALL2ALL_BACKEND=pplx VLLM_USE_DEEP_GEMM=1 \
-    vllm serve deepseek-ai/DeepSeek-V3-0324 \
-    --tensor-parallel-size 1 \      # Tensor parallelism across 1 GPU
-    --data-parallel-size 8 \         # Data parallelism across 8 processes
-    --enable-expert-parallel         # Enable expert parallelism
-```
-
-## Multi-Node Deployment
-
-For multi-node deployment, use the DeepEP communication kernel with one of two modes (see [Backend Selection Guide](#backend-selection-guide) above).
-
-### Deployment Steps
-
-1. **Run one command per node** - Each node requires its own launch command
-2. **Configure networking** - Ensure proper IP addresses and port configurations
-3. **Set node roles** - First node handles requests, additional nodes run in headless mode
-
-### Example: 2-Node Deployment
-
-The following example deploys `DeepSeek-V3-0324` across 2 nodes using `deepep_low_latency` mode:
-
-```bash
-# Node 1 (Primary - handles incoming requests)
-VLLM_ALL2ALL_BACKEND=deepep_low_latency VLLM_USE_DEEP_GEMM=1 \
-    vllm serve deepseek-ai/DeepSeek-V3-0324 \
-    --tensor-parallel-size 1 \               # TP size per node
-    --enable-expert-parallel \               # Enable EP
-    --data-parallel-size 16 \                # Total DP size across all nodes
-    --data-parallel-size-local 8 \           # Local DP size on this node (8 GPUs per node)
-    --data-parallel-address 192.168.1.100 \  # Replace with actual IP of Node 1
-    --data-parallel-rpc-port 13345 \         # RPC communication port, can be any port as long as reachable by all nodes
-    --api-server-count=8                     # Number of API servers for load handling (scaling this out to total ranks are recommended)
-
-# Node 2 (Secondary - headless mode, no API server)
-VLLM_ALL2ALL_BACKEND=deepep_low_latency VLLM_USE_DEEP_GEMM=1 \
-    vllm serve deepseek-ai/DeepSeek-V3-0324 \
-    --tensor-parallel-size 1 \               # TP size per node
-    --enable-expert-parallel \               # Enable EP
-    --data-parallel-size 16 \                # Total DP size across all nodes
-    --data-parallel-size-local 8 \           # Local DP size on this node
-    --data-parallel-start-rank 8 \           # Starting rank offset for this node
-    --data-parallel-address 192.168.1.100 \  # IP of primary node (Node 1)
-    --data-parallel-rpc-port 13345 \         # Same RPC port as primary
-    --headless                               # No API server, worker only
-```
-
-### Key Configuration Notes
-
-- **Headless mode**: Secondary nodes run with `--headless` flag, meaning all client requests are handled by the primary node
-- **Rank calculation**: `--data-parallel-start-rank` should equal the cumulative local DP size of previous nodes
-- **Load scaling**: Adjust `--api-server-count` on the primary node to handle higher request loads
-
-### Network Configuration
-
-!!! important "InfiniBand Clusters"
-    On InfiniBand networked clusters, set this environment variable to prevent initialization hangs:
-    ```bash
-    export GLOO_SOCKET_IFNAME=eth0
-    ```
-    This ensures torch distributed group discovery uses Ethernet instead of InfiniBand for initial setup.
-
-## Expert Parallel Load Balancer (EPLB)
-
-While MoE models are typically trained so that each expert receives a similar number of tokens, in practice the distribution of tokens across experts can be highly skewed. vLLM provides an Expert Parallel Load Balancer (EPLB) to redistribute expert mappings across EP ranks, evening the load across experts.
-
-### Configuration
-
-Enable EPLB with the `--enable-eplb` flag.
-
-!!! note "Model Support"
-    Currently only DeepSeek V3 architecture is supported.
-
-When enabled, vLLM collects load statistics with every forward pass and periodically rebalances expert distribution.
-
-### EPLB Parameters
-
-| Parameter | Description | Default |
-|-----------|-------------|---------|
-| `--eplb-window-size` | Number of engine steps to track for rebalancing decisions | - |
-| `--eplb-step-interval` | Frequency of rebalancing (every N engine steps) | - |
-| `--eplb-log-balancedness` | Log balancedness metrics (avg tokens per expert ÷ max tokens per expert) | `false` |
-| `--num-redundant-experts` | Additional global experts per EP rank beyond equal distribution | `0` |
-
-### Expert Distribution Formula
-
-- **Default**: Each EP rank has `NUM_TOTAL_EXPERTS ÷ NUM_EP_RANKS` experts
-- **With redundancy**: Each EP rank has `(NUM_TOTAL_EXPERTS + NUM_REDUNDANT_EXPERTS) ÷ NUM_EP_RANKS` experts
-
-### Example Command
-
-Single node deployment with EPLB enabled:
-
-```bash
-# Single node with EPLB load balancing
-VLLM_ALL2ALL_BACKEND=pplx VLLM_USE_DEEP_GEMM=1 vllm serve deepseek-ai/DeepSeek-V3-0324 \
-    --tensor-parallel-size 1 \     # Tensor parallelism
-    --data-parallel-size 8 \        # Data parallelism  
-    --enable-expert-parallel \      # Enable EP
-    --enable-eplb \                 # Enable load balancer
-    --eplb-log-balancedness \       # Log balancing metrics
-    --eplb-window-size 1000 \       # Track last 1000 engine steps
-    --eplb-step-interval 3000       # Rebalance every 3000 steps
-```
-
-For multi-node deployment, add these EPLB flags to each node's command. We recommend setting `--num-redundant-experts` to 32 in large scale use cases so the most popular experts are always available.
-
-## Disaggregated Serving (Prefill/Decode Split)
-
-For production deployments requiring strict SLA guarantees for time-to-first-token and inter-token latency, disaggregated serving allows independent scaling of prefill and decode operations.
-
-### Architecture Overview
-
-- **Prefill Instance**: Uses `deepep_high_throughput` backend for optimal prefill performance
-- **Decode Instance**: Uses `deepep_low_latency` backend for minimal decode latency  
-- **KV Cache Transfer**: Connects instances via NIXL or other KV connectors
-
-### Setup Steps
-
-1. **Install KV Connector**: Install NIXL using the [installation script](gh-file:tools/install_nixl.sh)
-
-2. **Configure Both Instances**: Add this flag to both prefill and decode instances `--kv-transfer-config '{"kv_connector":"NixlConnector","kv_role":"kv_both"}`
-
-3. **Client Orchestration**: Use the client-side script below to coordinate prefill/decode operations. We are actively working on routing solutions.
-
-### Client Orchestration Example
-
-```python
-from openai import OpenAI
-import uuid
-
-try:
-    # 1: Set up clients for prefill and decode instances
-    openai_api_key = "EMPTY"  # vLLM doesn't require a real API key
-    
-    # Replace these IP addresses with your actual instance addresses
-    prefill_client = OpenAI(
-        api_key=openai_api_key,
-        base_url="http://192.168.1.100:8000/v1",  # Prefill instance URL
-    )
-    decode_client = OpenAI(
-        api_key=openai_api_key,
-        base_url="http://192.168.1.101:8001/v1",  # Decode instance URL  
-    )
-    
-    # Get model name from prefill instance
-    models = prefill_client.models.list()
-    model = models.data[0].id
-    print(f"Using model: {model}")
-
-    # 2: Prefill Phase
-    # Generate unique request ID to link prefill and decode operations
-    request_id = str(uuid.uuid4())
-    print(f"Request ID: {request_id}")
-    
-    prefill_response = prefill_client.completions.create(
-        model=model,
-        # Prompt must exceed vLLM's block size (16 tokens) for PD to work
-        prompt="Write a detailed explanation of Paged Attention for Transformers works including the management of KV cache for multi-turn conversations",
-        max_tokens=1,  # Force prefill-only operation
-        extra_body={
-            "kv_transfer_params": {
-                "do_remote_decode": True,     # Enable remote decode
-                "do_remote_prefill": False,   # This is the prefill instance
-                "remote_engine_id": None,     # Will be populated by vLLM
-                "remote_block_ids": None,     # Will be populated by vLLM
-                "remote_host": None,          # Will be populated by vLLM
-                "remote_port": None           # Will be populated by vLLM
-            }
-        },
-        extra_headers={"X-Request-Id": request_id}
-    )
-    
-    print("-" * 50)
-    print("✓ Prefill completed successfully")
-    print(f"Prefill response: {prefill_response.choices[0].text}")
-    
-    # 3: Decode Phase
-    # Transfer KV cache parameters from prefill to decode instance
-    decode_response = decode_client.completions.create(
-        model=model,
-        prompt="This prompt is ignored during decode",  # Original prompt not needed
-        max_tokens=150,  # Generate up to 150 tokens
-        extra_body={
-            "kv_transfer_params": prefill_response.kv_transfer_params  # Pass KV cache info
-        },
-        extra_headers={"X-Request-Id": request_id}  # Same request ID
-    )
-    
-    print("-" * 50)
-    print("✓ Decode completed successfully")
-    print(f"Final response: {decode_response.choices[0].text}")
-
-except Exception as e:
-    print(f"❌ Error during disaggregated serving: {e}")
-    print("Check that both prefill and decode instances are running and accessible")
-```

docs/serving/openai_compatible_server.md

@@ -45,17 +45,17 @@ To call the server, in your preferred text editor, create a script that uses an
 We currently support the following OpenAI APIs:
 
 - [Completions API][completions-api] (`/v1/completions`)
-    - Only applicable to [text generation models](../models/generative_models.md).
+    - Only applicable to [text generation models](../models/generative_models.md) (`--task generate`).
     - *Note: `suffix` parameter is not supported.*
 - [Chat Completions API][chat-api] (`/v1/chat/completions`)
-    - Only applicable to [text generation models](../models/generative_models.md) with a [chat template][chat-template].
+    - Only applicable to [text generation models](../models/generative_models.md) (`--task generate`) with a [chat template][chat-template].
     - *Note: `parallel_tool_calls` and `user` parameters are ignored.*
 - [Embeddings API][embeddings-api] (`/v1/embeddings`)
-    - Only applicable to [embedding models](../models/pooling_models.md).
+    - Only applicable to [embedding models](../models/pooling_models.md) (`--task embed`).
 - [Transcriptions API][transcriptions-api] (`/v1/audio/transcriptions`)
-    - Only applicable to [Automatic Speech Recognition (ASR) models](../models/supported_models.md#transcription).
+    - Only applicable to Automatic Speech Recognition (ASR) models (OpenAI Whisper) (`--task generate`).
 - [Translation API][translations-api] (`/v1/audio/translations`)
-    - Only applicable to [Automatic Speech Recognition (ASR) models](../models/supported_models.md#transcription).
+    - Only applicable to Automatic Speech Recognition (ASR) models (OpenAI Whisper) (`--task generate`).
 
 In addition, we have the following custom APIs:
 
@@ -64,14 +64,14 @@ In addition, we have the following custom APIs:
 - [Pooling API][pooling-api] (`/pooling`)
     - Applicable to all [pooling models](../models/pooling_models.md).
 - [Classification API][classification-api] (`/classify`)
-    - Only applicable to [classification models](../models/pooling_models.md).
+    - Only applicable to [classification models](../models/pooling_models.md) (`--task classify`).
 - [Score API][score-api] (`/score`)
-    - Applicable to [embedding models and cross-encoder models](../models/pooling_models.md).
+    - Applicable to embedding models and [cross-encoder models](../models/pooling_models.md) (`--task score`).
 - [Re-rank API][rerank-api] (`/rerank`, `/v1/rerank`, `/v2/rerank`)
     - Implements [Jina AI's v1 re-rank API](https://jina.ai/reranker/)
     - Also compatible with [Cohere's v1 & v2 re-rank APIs](https://docs.cohere.com/v2/reference/rerank)
     - Jina and Cohere's APIs are very similar; Jina's includes extra information in the rerank endpoint's response.
-    - Only applicable to [cross-encoder models](../models/pooling_models.md).
+    - Only applicable to [cross-encoder models](../models/pooling_models.md) (`--task score`).
 
 [](){ #chat-template }
 
@@ -250,14 +250,14 @@ and passing a list of `messages` in the request. Refer to the examples below for
     To serve the model:
 
     ```bash
-    vllm serve TIGER-Lab/VLM2Vec-Full --runner pooling \
+    vllm serve TIGER-Lab/VLM2Vec-Full --task embed \
       --trust-remote-code \
       --max-model-len 4096 \
       --chat-template examples/template_vlm2vec.jinja
     ```
 
     !!! important
-        Since VLM2Vec has the same model architecture as Phi-3.5-Vision, we have to explicitly pass `--runner pooling`
+        Since VLM2Vec has the same model architecture as Phi-3.5-Vision, we have to explicitly pass `--task embed`
         to run this model in embedding mode instead of text generation mode.
 
         The custom chat template is completely different from the original one for this model,
@@ -296,14 +296,14 @@ and passing a list of `messages` in the request. Refer to the examples below for
     To serve the model:
 
     ```bash
-    vllm serve MrLight/dse-qwen2-2b-mrl-v1 --runner pooling \
+    vllm serve MrLight/dse-qwen2-2b-mrl-v1 --task embed \
       --trust-remote-code \
       --max-model-len 8192 \
       --chat-template examples/template_dse_qwen2_vl.jinja
     ```
 
     !!! important
-        Like with VLM2Vec, we have to explicitly pass `--runner pooling`.
+        Like with VLM2Vec, we have to explicitly pass `--task embed`.
 
         Additionally, `MrLight/dse-qwen2-2b-mrl-v1` requires an EOS token for embeddings, which is handled
         by a custom chat template: <gh-file:examples/template_dse_qwen2_vl.jinja>
@@ -351,11 +351,6 @@ you can use the [official OpenAI Python client](https://github.com/openai/openai
 Code example: <gh-file:examples/online_serving/openai_transcription_client.py>
 <!-- TODO: api enforced limits + uploading audios -->
 
-#### API Enforced Limits
-
-Set the maximum audio file size (in MB) that VLLM will accept, via the
-`VLLM_MAX_AUDIO_CLIP_FILESIZE_MB` environment variable. Default is 25 MB.
-
 #### Extra Parameters
 
 The following [sampling parameters][sampling-params] are supported.

docs/training/rlhf.md

@@ -2,14 +2,10 @@
 
 Reinforcement Learning from Human Feedback (RLHF) is a technique that fine-tunes language models using human-generated preference data to align model outputs with desired behaviors.
 
-vLLM can be used to generate the completions for RLHF. Some ways to do this include using libraries like [TRL](https://github.com/huggingface/trl), [OpenRLHF](https://github.com/OpenRLHF/OpenRLHF), [verl](https://github.com/volcengine/verl) and [unsloth](https://github.com/unslothai/unsloth).
+vLLM can be used to generate the completions for RLHF. The best way to do this is with libraries like [TRL](https://github.com/huggingface/trl), [OpenRLHF](https://github.com/OpenRLHF/OpenRLHF) and [verl](https://github.com/volcengine/verl).
 
 See the following basic examples to get started if you don't want to use an existing library:
 
 - [Training and inference processes are located on separate GPUs (inspired by OpenRLHF)](../examples/offline_inference/rlhf.md)
 - [Training and inference processes are colocated on the same GPUs using Ray](../examples/offline_inference/rlhf_colocate.md)
 - [Utilities for performing RLHF with vLLM](../examples/offline_inference/rlhf_utils.md)
-
-See the following notebooks showing how to use vLLM for GRPO:
-
-- [Qwen-3 4B GRPO using Unsloth + vLLM](https://colab.research.google.com/github/unslothai/notebooks/blob/main/nb/Qwen3_(4B)-GRPO.ipynb)

examples/offline_inference/audio_language.py

@@ -190,37 +190,6 @@ def run_phi4mm(question: str, audio_count: int) -> ModelRequestData:
     )
 
 
-def run_phi4_multimodal(question: str, audio_count: int) -> ModelRequestData:
-    """
-    Phi-4-multimodal-instruct supports both image and audio inputs. Here, we
-    show how to process audio inputs.
-    """
-    model_path = snapshot_download(
-        "microsoft/Phi-4-multimodal-instruct", revision="refs/pr/70"
-    )
-    # Since the vision-lora and speech-lora co-exist with the base model,
-    # we have to manually specify the path of the lora weights.
-    speech_lora_path = os.path.join(model_path, "speech-lora")
-    placeholders = "<|audio|>" * audio_count
-
-    prompts = f"<|user|>{placeholders}{question}<|end|><|assistant|>"
-
-    engine_args = EngineArgs(
-        model=model_path,
-        max_model_len=12800,
-        max_num_seqs=2,
-        enable_lora=True,
-        max_lora_rank=320,
-        limit_mm_per_prompt={"audio": audio_count},
-    )
-
-    return ModelRequestData(
-        engine_args=engine_args,
-        prompt=prompts,
-        lora_requests=[LoRARequest("speech", 1, speech_lora_path)],
-    )
-
-
 # Qwen2-Audio
 def run_qwen2_audio(question: str, audio_count: int) -> ModelRequestData:
     model_name = "Qwen/Qwen2-Audio-7B-Instruct"
@@ -334,7 +303,6 @@ model_example_map = {
     "granite_speech": run_granite_speech,
     "minicpmo": run_minicpmo,
     "phi4_mm": run_phi4mm,
-    "phi4_multimodal": run_phi4_multimodal,
     "qwen2_audio": run_qwen2_audio,
     "qwen2_5_omni": run_qwen2_5_omni,
     "ultravox": run_ultravox,

examples/offline_inference/basic/classify.py

@@ -12,9 +12,7 @@ def parse_args():
     parser = EngineArgs.add_cli_args(parser)
     # Set example specific arguments
     parser.set_defaults(
-        model="jason9693/Qwen2.5-1.5B-apeach",
-        runner="pooling",
-        enforce_eager=True,
+        model="jason9693/Qwen2.5-1.5B-apeach", task="classify", enforce_eager=True
     )
     return parser.parse_args()
 
@@ -29,7 +27,7 @@ def main(args: Namespace):
     ]
 
     # Create an LLM.
-    # You should pass runner="pooling" for classification models
+    # You should pass task="classify" for classification models
     llm = LLM(**vars(args))
 
     # Generate logits. The output is a list of ClassificationRequestOutputs.

examples/offline_inference/basic/embed.py

@@ -13,7 +13,7 @@ def parse_args():
     # Set example specific arguments
     parser.set_defaults(
         model="intfloat/e5-mistral-7b-instruct",
-        runner="pooling",
+        task="embed",
         enforce_eager=True,
         max_model_len=1024,
     )
@@ -30,7 +30,7 @@ def main(args: Namespace):
     ]
 
     # Create an LLM.
-    # You should pass runner="pooling" for embedding models
+    # You should pass task="embed" for embedding models
     llm = LLM(**vars(args))
 
     # Generate embedding. The output is a list of EmbeddingRequestOutputs.

examples/offline_inference/basic/score.py

@@ -12,9 +12,7 @@ def parse_args():
     parser = EngineArgs.add_cli_args(parser)
     # Set example specific arguments
     parser.set_defaults(
-        model="BAAI/bge-reranker-v2-m3",
-        runner="pooling",
-        enforce_eager=True,
+        model="BAAI/bge-reranker-v2-m3", task="score", enforce_eager=True
     )
     return parser.parse_args()
 
@@ -28,7 +26,7 @@ def main(args: Namespace):
     ]
 
     # Create an LLM.
-    # You should pass runner="pooling" for cross-encoder models
+    # You should pass task="score" for cross-encoder models
     llm = LLM(**vars(args))
 
     # Generate scores. The output is a list of ScoringRequestOutputs.

examples/offline_inference/embed_jina_embeddings_v3.py

@@ -12,9 +12,7 @@ def parse_args():
     parser = EngineArgs.add_cli_args(parser)
     # Set example specific arguments
     parser.set_defaults(
-        model="jinaai/jina-embeddings-v3",
-        runner="pooling",
-        trust_remote_code=True,
+        model="jinaai/jina-embeddings-v3", task="embed", trust_remote_code=True
     )
     return parser.parse_args()
 
@@ -31,7 +29,7 @@ def main(args: Namespace):
     ]
 
     # Create an LLM.
-    # You should pass runner="pooling" for embedding models
+    # You should pass task="embed" for embedding models
     llm = LLM(**vars(args))
 
     # Generate embedding. The output is a list of EmbeddingRequestOutputs.

examples/offline_inference/embed_matryoshka_fy.py

@@ -12,9 +12,7 @@ def parse_args():
     parser = EngineArgs.add_cli_args(parser)
     # Set example specific arguments
     parser.set_defaults(
-        model="jinaai/jina-embeddings-v3",
-        runner="pooling",
-        trust_remote_code=True,
+        model="jinaai/jina-embeddings-v3", task="embed", trust_remote_code=True
     )
     return parser.parse_args()
 
@@ -31,7 +29,7 @@ def main(args: Namespace):
     ]
 
     # Create an LLM.
-    # You should pass runner="pooling" for embedding models
+    # You should pass task="embed" for embedding models
     llm = LLM(**vars(args))
 
     # Generate embedding. The output is a list of EmbeddingRequestOutputs.

examples/offline_inference/prithvi_geospatial_mae.py

@@ -1,5 +1,24 @@
 # SPDX-License-Identifier: Apache-2.0
 # SPDX-FileCopyrightText: Copyright contributors to the vLLM project
+"""
+This is a demo script showing how to use the
+PrithviGeospatialMAE model with vLLM
+This script is based on: https://huggingface.co/ibm-nasa-geospatial/Prithvi-EO-2.0-300M-TL-Sen1Floods11/blob/main/inference.py # noqa
+
+Target model weights: https://huggingface.co/ibm-nasa-geospatial/Prithvi-EO-2.0-300M-TL-Sen1Floods11/resolve/main/Prithvi-EO-V2-300M-TL-Sen1Floods11.pt # noqa
+
+The requirements for running this script are:
+- Installing [terratorch, albumentations, rasterio] in your python environment
+- downloading the model weights in a 'model' folder local to the script
+  (temporary measure until the proper config.json file is uploaded to HF)
+- download an input example image (India_900498_S2Hand.tif) and place it in
+  the same folder with the script (or specify with the --data_file argument)
+
+Run the example:
+python prithvi_geospatial_mae.py
+
+"""  # noqa: E501
+
 import argparse
 import datetime
 import os
@@ -15,13 +34,89 @@ from terratorch.datamodules import Sen1Floods11NonGeoDataModule
 
 from vllm import LLM
 
-torch.set_default_dtype(torch.float16)
-
 NO_DATA = -9999
 NO_DATA_FLOAT = 0.0001
 OFFSET = 0
 PERCENTILE = 99
 
+model_config = """{
+  "architectures": ["PrithviGeoSpatialMAE"],
+  "num_classes": 0,
+  "pretrained_cfg": {
+    "task_args": {
+      "task": "SemanticSegmentationTask",
+      "model_factory": "EncoderDecoderFactory",
+      "loss": "ce",
+      "ignore_index": -1,
+      "lr": 0.001,
+      "freeze_backbone": false,
+      "freeze_decoder": false,
+      "plot_on_val": 10,
+      "optimizer": "AdamW",
+      "scheduler": "CosineAnnealingLR"
+    },
+    "model_args": {
+      "backbone_pretrained": false,
+      "backbone": "prithvi_eo_v2_300_tl",
+      "decoder": "UperNetDecoder",
+      "decoder_channels": 256,
+      "decoder_scale_modules": true,
+      "num_classes": 2,
+      "rescale": true,
+      "backbone_bands": [
+        "BLUE",
+        "GREEN",
+        "RED",
+        "NIR_NARROW",
+        "SWIR_1",
+        "SWIR_2"
+      ],
+      "head_dropout": 0.1,
+      "necks": [
+        {
+          "name": "SelectIndices",
+          "indices": [
+            5,
+            11,
+            17,
+            23
+          ]
+        },
+        {
+          "name": "ReshapeTokensToImage"
+        }
+      ]
+    },
+    "optimizer_params" : {
+      "lr": 5.0e-05,
+      "betas": [0.9, 0.999],
+      "eps": [1.0e-08],
+      "weight_decay": 0.05,
+      "amsgrad": false,
+      "maximize": false,
+      "capturable": false,
+      "differentiable": false
+    },
+    "scheduler_params" : {
+        "T_max": 50,
+        "eta_min": 0,
+        "last_epoch": -1,
+        "verbose": "deprecated"
+    }
+  },
+
+
+  "torch_dtype": "float32"
+}
+"""
+
+# Temporarily creating the "config.json" for the model.
+# This is going to disappear once the correct config.json is available on HF
+with open(
+    os.path.join(os.path.dirname(__file__), "./model/config.json"), "w"
+) as config_file:
+    config_file.write(model_config)
+
 datamodule_config = {
     "bands": ["BLUE", "GREEN", "RED", "NIR_NARROW", "SWIR_1", "SWIR_2"],
     "batch_size": 16,
@@ -43,24 +138,28 @@ datamodule_config = {
 
 
 class PrithviMAE:
-    def __init__(self, model):
-        self.model = LLM(
-            model=model, skip_tokenizer_init=True, dtype="float16", enforce_eager=True
+    def __init__(self):
+        print("Initializing PrithviMAE model")
+        self.llm = LLM(
+            model=os.path.join(os.path.dirname(__file__), "./model"),
+            skip_tokenizer_init=True,
+            dtype="float32",
         )
 
     def run(self, input_data, location_coords):
+        print("################ Running inference on vLLM ##############")
         # merge the inputs into one data structure
-        if input_data is not None and input_data.dtype == torch.float32:
-            input_data = input_data.to(torch.float16)
-            input_data = input_data[0]
-
         mm_data = {
-            "pixel_values": input_data,
-            "location_coords": location_coords,
+            "pixel_values": torch.empty(0) if input_data is None else input_data,
+            "location_coords": torch.empty(0)
+            if location_coords is None
+            else location_coords,
         }
 
         prompt = {"prompt_token_ids": [1], "multi_modal_data": mm_data}
-        outputs = self.model.encode(prompt, use_tqdm=False)
+
+        outputs = self.llm.encode(prompt, use_tqdm=False)
+        print("################ Inference done (it took seconds)  ##############")
 
         return outputs[0].outputs.data
 
@@ -82,12 +181,11 @@ def process_channel_group(orig_img, channels):
     """
     Args:
         orig_img: torch.Tensor representing original image (reference)
-        with shape = (bands, H, W).
+                  with shape = (bands, H, W).
         channels: list of indices representing RGB channels.
 
     Returns:
-        torch.Tensor with shape (num_channels, height, width)
-        for original image
+        torch.Tensor with shape (num_channels, height, width) for original image
     """
 
     orig_img = orig_img[channels, ...]
@@ -162,10 +260,10 @@ def load_example(
 
     Args:
         file_paths: list of file paths .
-        mean: list containing mean values for each band in the
-              images in *file_paths*.
-        std: list containing std values for each band in the
-             images in *file_paths*.
+        mean: list containing mean values for each band in the images
+              in *file_paths*.
+        std: list containing std values for each band in the images
+             in *file_paths*.
 
     Returns:
         np.array containing created example
@@ -210,7 +308,7 @@ def load_example(
             print(f"Could not extract timestamp for {file} ({e})")
 
     imgs = np.stack(imgs, axis=0)  # num_frames, H, W, C
-    imgs = np.moveaxis(imgs, -1, 0).astype("float32")  # C, num_frames, H, W
+    imgs = np.moveaxis(imgs, -1, 0).astype("float32")
     imgs = np.expand_dims(imgs, axis=0)  # add batch di
 
     return imgs, temporal_coords, location_coords, metas
@@ -234,10 +332,8 @@ def run_model(
     )
 
     # Build sliding window
-
     batch_size = 1
-    # batch = torch.tensor(input_data, device="cpu")
-    batch = torch.tensor(input_data)
+    batch = torch.tensor(input_data, device="cpu")
     windows = batch.unfold(3, img_size, img_size).unfold(4, img_size, img_size)
     h1, w1 = windows.shape[3:5]
     windows = rearrange(
@@ -248,16 +344,18 @@ def run_model(
     num_batches = windows.shape[0] // batch_size if windows.shape[0] > batch_size else 1
     windows = torch.tensor_split(windows, num_batches, dim=0)
 
+    device = torch.device("cuda") if torch.cuda.is_available() else torch.device("cpu")
+
     if temporal_coords:
-        temporal_coords = torch.tensor(temporal_coords).unsqueeze(0)
+        temporal_coords = torch.tensor(temporal_coords, device=device).unsqueeze(0)
     else:
         temporal_coords = None
     if location_coords:
-        location_coords = torch.tensor(location_coords[0]).unsqueeze(0)
+        location_coords = torch.tensor(location_coords[0], device=device).unsqueeze(0)
     else:
         location_coords = None
 
-    # Run Prithvi-EO-V2-300M-TL-Sen1Floods11
+    # Run model
     pred_imgs = []
     for x in windows:
         # Apply standardization
@@ -265,7 +363,15 @@ def run_model(
         x = datamodule.aug(x)["image"]
 
         with torch.no_grad():
+            x = x.to(device)
             pred = model.run(x, location_coords=location_coords)
+            if lightning_model:
+                pred_lightning = lightning_model(
+                    x, temporal_coords=temporal_coords, location_coords=location_coords
+                )
+                pred_lightning = pred_lightning.output.detach().cpu()
+                if not torch.equal(pred, pred_lightning):
+                    print("Inference output is not equal")
         y_hat = pred.argmax(dim=1)
 
         y_hat = torch.nn.functional.interpolate(
@@ -297,18 +403,52 @@ def run_model(
     return pred_imgs
 
 
+def parse_args():
+    parser = argparse.ArgumentParser("MAE run inference", add_help=False)
+
+    parser.add_argument(
+        "--data_file",
+        type=str,
+        default="./India_900498_S2Hand.tif",
+        help="Path to the file.",
+    )
+    parser.add_argument(
+        "--output_dir",
+        type=str,
+        default="output",
+        help="Path to the directory where to save outputs.",
+    )
+    parser.add_argument(
+        "--input_indices",
+        default=[1, 2, 3, 8, 11, 12],
+        type=int,
+        nargs="+",
+        help="0-based indices of the six Prithvi channels to be selected from the  "
+        "input. By default selects [1,2,3,8,11,12] for S2L1C data.",
+    )
+    parser.add_argument(
+        "--rgb_outputs",
+        action="store_true",
+        help="If present, output files will only contain RGB channels. "
+        "Otherwise, all bands will be saved.",
+    )
+
+
 def main(
     data_file: str,
-    model: str,
     output_dir: str,
     rgb_outputs: bool,
     input_indices: list[int] = None,
 ):
     os.makedirs(output_dir, exist_ok=True)
 
-    model_obj = PrithviMAE(model=model)
+    # Load model ---------------------------------------------------------------
+
+    model_obj = PrithviMAE()
     datamodule = generate_datamodule()
-    img_size = 512  # Size of Sen1Floods11
+    img_size = 256  # Size of Sen1Floods11
+
+    # Loading data -------------------------------------------------------------
 
     input_data, temporal_coords, location_coords, meta_data = load_example(
         file_paths=[data_file],
@@ -320,6 +460,8 @@ def main(
     if input_data.mean() > 1:
         input_data = input_data / 10000  # Convert to range 0-1
 
+    # Running model ------------------------------------------------------------
+
     channels = [
         datamodule_config["bands"].index(b) for b in ["RED", "GREEN", "BLUE"]
     ]  # BGR -> RGB
@@ -327,6 +469,7 @@ def main(
     pred = run_model(
         input_data, temporal_coords, location_coords, model_obj, datamodule, img_size
     )
+
     # Save pred
     meta_data.update(count=1, dtype="uint8", compress="lzw", nodata=0)
     pred_file = os.path.join(
@@ -344,7 +487,6 @@ def main(
         orig_img=torch.Tensor(input_data[0, :, 0, ...]),
         channels=channels,
     )
-    rgb_orig = rgb_orig.to(torch.float32)
 
     pred[pred == 0.0] = np.nan
     img_pred = rgb_orig * 0.7 + pred * 0.3
@@ -361,10 +503,9 @@ def main(
 
     # Save image rgb
     if rgb_outputs:
-        name_suffix = os.path.splitext(os.path.basename(data_file))[0]
         rgb_file = os.path.join(
             output_dir,
-            f"original_rgb_{name_suffix}.tiff",
+            f"original_rgb_{os.path.splitext(os.path.basename(data_file))[0]}.tiff",
         )
         save_geotiff(
             image=_convert_np_uint8(rgb_orig),
@@ -374,42 +515,6 @@ def main(
 
 
 if __name__ == "__main__":
-    parser = argparse.ArgumentParser("MAE run inference", add_help=False)
-
-    parser.add_argument(
-        "--data_file",
-        type=str,
-        default="./India_900498_S2Hand.tif",
-        help="Path to the file.",
-    )
-    parser.add_argument(
-        "--model",
-        type=str,
-        default="christian-pinto/Prithvi-EO-2.0-300M-TL-VLLM",
-        help="Path to a checkpoint file to load from.",
-    )
-    parser.add_argument(
-        "--output_dir",
-        type=str,
-        default="output",
-        help="Path to the directory where to save outputs.",
-    )
-    parser.add_argument(
-        "--input_indices",
-        default=[1, 2, 3, 8, 11, 12],
-        type=int,
-        nargs="+",
-        help="""
-        0-based indices of the six Prithvi channels to be selected from the input.
-        By default selects [1,2,3,8,11,12] for S2L1C data.
-        """,
-    )
-    parser.add_argument(
-        "--rgb_outputs",
-        action="store_true",
-        help="If present, output files will only contain RGB channels. "
-        "Otherwise, all bands will be saved.",
-    )
-    args = parser.parse_args()
+    args = parse_args()
 
     main(**vars(args))

examples/offline_inference/qwen3_reranker.py

@@ -17,7 +17,7 @@ model_name = "Qwen/Qwen3-Reranker-0.6B"
 # Models converted offline using this method can not only be more efficient
 # and support the vllm score API, but also make the init parameters more
 # concise, for example.
-# llm = LLM(model="tomaarsen/Qwen3-Reranker-0.6B-seq-cls", runner="pooling")
+# llm = LLM(model="tomaarsen/Qwen3-Reranker-0.6B-seq-cls", task="score")
 
 # If you want to load the official original version, the init parameters are
 # as follows.
@@ -27,7 +27,7 @@ def get_llm() -> LLM:
     """Initializes and returns the LLM model for Qwen3-Reranker."""
     return LLM(
         model=model_name,
-        runner="pooling",
+        task="score",
         hf_overrides={
             "architectures": ["Qwen3ForSequenceClassification"],
             "classifier_from_token": ["no", "yes"],

examples/offline_inference/save_sharded_state.py

@@ -29,7 +29,6 @@ import shutil
 from pathlib import Path
 
 from vllm import LLM, EngineArgs
-from vllm.model_executor.model_loader import ShardedStateLoader
 from vllm.utils import FlexibleArgumentParser
 
 
@@ -40,14 +39,11 @@ def parse_args():
         "--output", "-o", required=True, type=str, help="path to output checkpoint"
     )
     parser.add_argument(
-        "--file-pattern",
-        type=str,
-        default=ShardedStateLoader.DEFAULT_PATTERN,
-        help="string pattern of saved filenames",
+        "--file-pattern", type=str, help="string pattern of saved filenames"
     )
     parser.add_argument(
         "--max-file-size",
-        type=int,
+        type=str,
         default=5 * 1024**3,
         help="max size (in bytes) of each safetensors file",
     )

examples/offline_inference/vision_language.py

@@ -316,85 +316,6 @@ def run_h2ovl(questions: list[str], modality: str) -> ModelRequestData:
     )
 
 
-# naver-hyperclovax/HyperCLOVAX-SEED-Vision-Instruct-3B
-def run_hyperclovax_seed_vision(
-    questions: list[str], modality: str
-) -> ModelRequestData:
-    model_name = "naver-hyperclovax/HyperCLOVAX-SEED-Vision-Instruct-3B"
-    tokenizer = AutoTokenizer.from_pretrained(model_name, trust_remote_code=True)
-
-    engine_args = EngineArgs(
-        model=model_name,
-        trust_remote_code=True,
-        max_model_len=8192 if modality == "image" else 16384,
-        limit_mm_per_prompt={modality: 1},
-    )
-
-    messages = list()
-    for question in questions:
-        if modality == "image":
-            """
-            ocr: List the words in the image in raster order. 
-                Even if the word order feels unnatural for reading, 
-                the model will handle it as long as it follows raster order.
-                e.g. "Naver, CLOVA, bigshane"
-            lens_keywords: List the entity names in the image.
-                e.g. "iPhone"
-            lens_local_keywords: List the entity names with quads in the image.
-                e.g. "[0.07, 0.21, 0.92, 0.90] iPhone"
-            """
-            messages.append(
-                [
-                    {
-                        "role": "user",
-                        "content": [
-                            {
-                                "type": "image",
-                                "ocr": "",
-                                "lens_keywords": "",
-                                "lens_local_keywords": "",
-                            },
-                            {
-                                "type": "text",
-                                "text": question,
-                            },
-                        ],
-                    }
-                ]
-            )
-        elif modality == "video":
-            messages.append(
-                [
-                    {
-                        "role": "user",
-                        "content": [
-                            {
-                                "type": "video",
-                            },
-                            {
-                                "type": "text",
-                                "text": question,
-                            },
-                        ],
-                    }
-                ]
-            )
-        else:
-            raise ValueError(f"Unsupported modality: {modality}")
-
-    prompts = tokenizer.apply_chat_template(
-        messages,
-        tokenize=False,
-        add_generation_prompt=True,
-    )
-
-    return ModelRequestData(
-        engine_args=engine_args,
-        prompts=prompts,
-        stop_token_ids=None,
-    )
-
-
 # Idefics3-8B-Llama3
 def run_idefics3(questions: list[str], modality: str) -> ModelRequestData:
     assert modality == "image"
@@ -468,39 +389,6 @@ def run_tarsier(questions: list[str], modality: str) -> ModelRequestData:
     )
 
 
-# Intern-S1
-def run_interns1(questions: list[str], modality: str) -> ModelRequestData:
-    model_name = "internlm/Intern-S1"
-
-    engine_args = EngineArgs(
-        model=model_name,
-        trust_remote_code=True,
-        max_model_len=8192,
-        max_num_seqs=2,
-        limit_mm_per_prompt={modality: 1},
-        enforce_eager=True,
-    )
-
-    if modality == "image":
-        placeholder = "<IMG_CONTEXT>"
-    elif modality == "video":
-        placeholder = "<video>"
-
-    tokenizer = AutoTokenizer.from_pretrained(model_name, trust_remote_code=True)
-    messages = [
-        [{"role": "user", "content": f"{placeholder}\n{question}"}]
-        for question in questions
-    ]
-    prompts = tokenizer.apply_chat_template(
-        messages, tokenize=False, add_generation_prompt=True
-    )
-
-    return ModelRequestData(
-        engine_args=engine_args,
-        prompts=prompts,
-    )
-
-
 # InternVL
 def run_internvl(questions: list[str], modality: str) -> ModelRequestData:
     model_name = "OpenGVLab/InternVL3-2B"
@@ -1099,41 +987,6 @@ def run_phi4mm(questions: list[str], modality: str) -> ModelRequestData:
     )
 
 
-# HF format Phi-4-multimodal-instruct
-def run_phi4_multimodal(questions: list[str], modality: str) -> ModelRequestData:
-    """
-    Phi-4-multimodal-instruct supports both image and audio inputs. Here, we
-    show how to process image inputs.
-    """
-    assert modality == "image"
-    model_path = snapshot_download(
-        "microsoft/Phi-4-multimodal-instruct", revision="refs/pr/70"
-    )
-    # Since the vision-lora and speech-lora co-exist with the base model,
-    # we have to manually specify the path of the lora weights.
-    vision_lora_path = os.path.join(model_path, "vision-lora")
-    prompts = [
-        f"<|user|><|image|>{question}<|end|><|assistant|>" for question in questions
-    ]
-    engine_args = EngineArgs(
-        model=model_path,
-        max_model_len=5120,
-        max_num_seqs=2,
-        max_num_batched_tokens=12800,
-        enable_lora=True,
-        max_lora_rank=320,
-        # Note - mm_processor_kwargs can also be passed to generate/chat calls
-        mm_processor_kwargs={"dynamic_hd": 16},
-        limit_mm_per_prompt={"image": 1},
-    )
-
-    return ModelRequestData(
-        engine_args=engine_args,
-        prompts=prompts,
-        lora_requests=[LoRARequest("vision", 1, vision_lora_path)],
-    )
-
-
 # Pixtral HF-format
 def run_pixtral_hf(questions: list[str], modality: str) -> ModelRequestData:
     assert modality == "image"
@@ -1369,9 +1222,7 @@ model_example_map = {
     "glm4v": run_glm4v,
     "glm4_1v": run_glm4_1v,
     "h2ovl_chat": run_h2ovl,
-    "hyperclovax_seed_vision": run_hyperclovax_seed_vision,
     "idefics3": run_idefics3,
-    "interns1": run_interns1,
     "internvl_chat": run_internvl,
     "nemotron_vl": run_nemotron_vl,
     "keye_vl": run_keye_vl,
@@ -1393,7 +1244,6 @@ model_example_map = {
     "paligemma2": run_paligemma2,
     "phi3_v": run_phi3v,
     "phi4_mm": run_phi4mm,
-    "phi4_multimodal": run_phi4_multimodal,
     "pixtral_hf": run_pixtral_hf,
     "qwen_vl": run_qwen_vl,
     "qwen2_vl": run_qwen2_vl,

examples/offline_inference/vision_language_multi_image.py

@@ -253,33 +253,6 @@ def load_smolvlm(question: str, image_urls: list[str]) -> ModelRequestData:
     )
 
 
-def load_interns1(question: str, image_urls: list[str]) -> ModelRequestData:
-    model_name = "internlm/Intern-S1"
-
-    engine_args = EngineArgs(
-        model=model_name,
-        trust_remote_code=True,
-        max_model_len=4096,
-        limit_mm_per_prompt={"image": len(image_urls)},
-    )
-
-    placeholders = "\n".join(
-        f"Image-{i}: <IMG_CONTEXT>\n" for i, _ in enumerate(image_urls, start=1)
-    )
-    messages = [{"role": "user", "content": f"{placeholders}\n{question}"}]
-
-    tokenizer = AutoTokenizer.from_pretrained(model_name, trust_remote_code=True)
-    prompt = tokenizer.apply_chat_template(
-        messages, tokenize=False, add_generation_prompt=True
-    )
-
-    return ModelRequestData(
-        engine_args=engine_args,
-        prompt=prompt,
-        image_data=[fetch_image(url) for url in image_urls],
-    )
-
-
 def load_internvl(question: str, image_urls: list[str]) -> ModelRequestData:
     model_name = "OpenGVLab/InternVL2-2B"
 
@@ -316,53 +289,6 @@ def load_internvl(question: str, image_urls: list[str]) -> ModelRequestData:
     )
 
 
-def load_hyperclovax_seed_vision(
-    question: str, image_urls: list[str]
-) -> ModelRequestData:
-    model_name = "naver-hyperclovax/HyperCLOVAX-SEED-Vision-Instruct-3B"
-    tokenizer = AutoTokenizer.from_pretrained(model_name, trust_remote_code=True)
-
-    engine_args = EngineArgs(
-        model=model_name,
-        trust_remote_code=True,
-        max_model_len=16384,
-        limit_mm_per_prompt={"image": len(image_urls)},
-    )
-
-    message = {"role": "user", "content": list()}
-    for _image_url in image_urls:
-        message["content"].append(
-            {
-                "type": "image",
-                "image": _image_url,
-                "ocr": "",
-                "lens_keywords": "",
-                "lens_local_keywords": "",
-            }
-        )
-    message["content"].append(
-        {
-            "type": "text",
-            "text": question,
-        }
-    )
-
-    prompt = tokenizer.apply_chat_template(
-        [
-            message,
-        ],
-        tokenize=False,
-        add_generation_prompt=True,
-    )
-
-    return ModelRequestData(
-        engine_args=engine_args,
-        prompt=prompt,
-        stop_token_ids=None,
-        image_data=[fetch_image(url) for url in image_urls],
-    )
-
-
 def load_llava(question: str, image_urls: list[str]) -> ModelRequestData:
     # NOTE: CAUTION! Original Llava models wasn't really trained on multi-image inputs,
     # it will generate poor response for multi-image inputs!
@@ -760,40 +686,6 @@ def load_phi4mm(question: str, image_urls: list[str]) -> ModelRequestData:
     )
 
 
-def load_phi4_multimodal(question: str, image_urls: list[str]) -> ModelRequestData:
-    """
-    Phi-4-multimodal-instruct supports both image and audio inputs. Here, we
-    show how to process multi images inputs.
-    """
-
-    model_path = snapshot_download(
-        "microsoft/Phi-4-multimodal-instruct", revision="refs/pr/70"
-    )
-    # Since the vision-lora and speech-lora co-exist with the base model,
-    # we have to manually specify the path of the lora weights.
-    vision_lora_path = os.path.join(model_path, "vision-lora")
-    engine_args = EngineArgs(
-        model=model_path,
-        max_model_len=4096,
-        max_num_seqs=2,
-        limit_mm_per_prompt={"image": len(image_urls)},
-        enable_lora=True,
-        max_lora_rank=320,
-        # Note - mm_processor_kwargs can also be passed to generate/chat calls
-        mm_processor_kwargs={"dynamic_hd": 4},
-    )
-
-    placeholders = "<|image|>" * len(image_urls)
-    prompt = f"<|user|>{placeholders}{question}<|end|><|assistant|>"
-
-    return ModelRequestData(
-        engine_args=engine_args,
-        prompt=prompt,
-        image_data=[fetch_image(url) for url in image_urls],
-        lora_requests=[LoRARequest("vision", 1, vision_lora_path)],
-    )
-
-
 def load_qwen_vl_chat(question: str, image_urls: list[str]) -> ModelRequestData:
     model_name = "Qwen/Qwen-VL-Chat"
     engine_args = EngineArgs(
@@ -1007,9 +899,7 @@ model_example_map = {
     "gemma3": load_gemma3,
     "h2ovl_chat": load_h2ovl,
     "idefics3": load_idefics3,
-    "interns1": load_interns1,
     "internvl_chat": load_internvl,
-    "hyperclovax_seed_vision": load_hyperclovax_seed_vision,
     "keye_vl": load_keye_vl,
     "kimi_vl": load_kimi_vl,
     "llava": load_llava,
@@ -1022,7 +912,6 @@ model_example_map = {
     "ovis": load_ovis,
     "phi3_v": load_phi3v,
     "phi4_mm": load_phi4mm,
-    "phi4_multimodal": load_phi4_multimodal,
     "pixtral_hf": load_pixtral_hf,
     "qwen_vl_chat": load_qwen_vl_chat,
     "qwen2_vl": load_qwen2_vl,

examples/offline_inference/vision_language_pooling.py

@@ -70,7 +70,7 @@ def run_e5_v(query: Query) -> ModelRequestData:
 
     engine_args = EngineArgs(
         model="royokong/e5-v",
-        runner="pooling",
+        task="embed",
         max_model_len=4096,
         limit_mm_per_prompt={"image": 1},
     )
@@ -102,7 +102,7 @@ def run_vlm2vec(query: Query) -> ModelRequestData:
 
     engine_args = EngineArgs(
         model="TIGER-Lab/VLM2Vec-Full",
-        runner="pooling",
+        task="embed",
         max_model_len=4096,
         trust_remote_code=True,
         mm_processor_kwargs={"num_crops": 4},
@@ -122,7 +122,7 @@ def run_jinavl_reranker(query: Query) -> ModelRequestData:
 
     engine_args = EngineArgs(
         model="jinaai/jina-reranker-m0",
-        runner="pooling",
+        task="score",
         max_model_len=32768,
         trust_remote_code=True,
         mm_processor_kwargs={

examples/online_serving/disaggregated_serving_p2p_nccl_xpyd/disagg_example_p2p_nccl_xpyd.sh

@@ -29,7 +29,7 @@ PROXY_PORT=${PROXY_PORT:-30001}
 PREFILL_GPUS=${PREFILL_GPUS:-0}
 DECODE_GPUS=${DECODE_GPUS:-1,2,3}
 PREFILL_PORTS=${PREFILL_PORTS:-20003}
-DECODE_PORTS=${DECODE_PORTS:-20005,20007,20009}
+DECODE_PORTS=${DECODE_PORTS:-20005,20007,20009} 
 
 echo "Warning: P2P NCCL disaggregated prefill XpYd support for vLLM v1 is experimental and subject to change."
 echo ""
@@ -93,7 +93,6 @@ ensure_python_library_installed() {
 cleanup() {
     echo "Stopping everything…"
     trap - INT TERM        # prevent re-entrancy
-    pkill -9 -f "disagg_proxy_p2p_nccl_xpyd.py"
     kill -- -$$            # negative PID  ==  "this whole process-group"
     wait                   # reap children so we don't leave zombies
     exit 0
@@ -164,7 +163,7 @@ main() {
         local gpu_id=${PREFILL_GPU_ARRAY[$i]}
         local port=${PREFILL_PORT_ARRAY[$i]}
         local kv_port=$((21001 + i))
-
+        
         echo "  Prefill server $((i+1)): GPU $gpu_id, Port $port, KV Port $kv_port"
         CUDA_VISIBLE_DEVICES=$gpu_id VLLM_USE_V1=1 vllm serve $MODEL \
         --enforce-eager \
@@ -193,7 +192,7 @@ main() {
         local gpu_id=${DECODE_GPU_ARRAY[$i]}
         local port=${DECODE_PORT_ARRAY[$i]}
         local kv_port=$((22001 + i))
-
+        
         echo "  Decode server $((i+1)): GPU $gpu_id, Port $port, KV Port $kv_port"
         VLLM_USE_V1=1 CUDA_VISIBLE_DEVICES=$gpu_id vllm serve $MODEL \
         --enforce-eager \
@@ -233,7 +232,7 @@ main() {
     # Run Benchmark
     # =============================================================================
     cd ../../../benchmarks/
-    vllm bench serve --port 10001 --seed $(date +%s) \
+    python3 benchmark_serving.py --port 10001 --seed $(date +%s) \
         --model $MODEL \
         --dataset-name random --random-input-len 7500 --random-output-len 200 \
         --num-prompts 200 --burstiness 100 --request-rate 2 | tee benchmark.log
@@ -243,4 +242,4 @@ main() {
     cleanup
 }
 
-main
+main

examples/online_serving/disaggregated_serving_p2p_nccl_xpyd/disagg_proxy_p2p_nccl_xpyd.py

@@ -120,7 +120,6 @@ async def forward_request(url, data, request_id):
 
 
 @app.route("/v1/completions", methods=["POST"])
-@app.route("/v1/chat/completions", methods=["POST"])
 async def handle_request():
     try:
         original_request_data = await request.get_json()
@@ -158,13 +157,13 @@ async def handle_request():
 
         # finish prefill
         async for _ in forward_request(
-            f"http://{prefill_addr}{request.path}", prefill_request, request_id
+            f"http://{prefill_addr}/v1/completions", prefill_request, request_id
         ):
             continue
 
         # return decode
         generator = forward_request(
-            f"http://{decode_addr}{request.path}", original_request_data, request_id
+            f"http://{decode_addr}/v1/completions", original_request_data, request_id
         )
         response = await make_response(generator)
         response.timeout = None

examples/online_serving/openai_chat_completion_client_for_multimodal.py

@@ -9,7 +9,7 @@ Launch the vLLM server with the following command:
 vllm serve llava-hf/llava-1.5-7b-hf
 
 (multi-image inference with Phi-3.5-vision-instruct)
-vllm serve microsoft/Phi-3.5-vision-instruct --runner generate \
+vllm serve microsoft/Phi-3.5-vision-instruct --task generate \
     --trust-remote-code --max-model-len 4096 --limit-mm-per-prompt '{"image":2}'
 
 (audio inference with Ultravox)

examples/online_serving/openai_chat_embedding_client_for_multimodal.py

@@ -92,7 +92,7 @@ def dse_qwen2_vl(inp: dict):
 def parse_args():
     parser = argparse.ArgumentParser(
         "Script to call a specified VLM through the API. Make sure to serve "
-        "the model with `--runner pooling` before running this."
+        "the model with --task embed before running this."
     )
     parser.add_argument(
         "--model",

examples/online_serving/openai_cross_encoder_score.py

@@ -3,7 +3,7 @@
 """
 Example online usage of Score API.
 
-Run `vllm serve <model> --runner pooling` to start up the server in vLLM.
+Run `vllm serve <model> --task score` to start up the server in vLLM.
 """
 
 import argparse

examples/online_serving/openai_cross_encoder_score_for_multimodal.py

@@ -3,7 +3,7 @@
 """
 Example online usage of Score API.
 
-Run `vllm serve <model> --runner pooling` to start up the server in vLLM.
+Run `vllm serve <model> --task score` to start up the server in vLLM.
 """
 
 import argparse

examples/online_serving/openai_pooling_client.py

@@ -3,7 +3,7 @@
 """
 Example online usage of Pooling API.
 
-Run `vllm serve <model> --runner pooling`
+Run `vllm serve <model> --task <embed|classify|reward|score>`
 to start up the server in vLLM.
 """
 

examples/online_serving/prometheus_grafana/README.md

@@ -28,7 +28,7 @@ Submit some sample requests to the server:
 ```bash
 wget https://huggingface.co/datasets/anon8231489123/ShareGPT_Vicuna_unfiltered/resolve/main/ShareGPT_V3_unfiltered_cleaned_split.json
 
-vllm bench serve \
+python3 ../../../benchmarks/benchmark_serving.py \
     --model mistralai/Mistral-7B-v0.1 \
     --tokenizer mistralai/Mistral-7B-v0.1 \
     --endpoint /v1/completions \

examples/online_serving/prompt_embed_inference_with_openai_client.py

@@ -10,7 +10,7 @@ This script demonstrates how to:
 
 Run the vLLM server first:
 vllm serve meta-llama/Llama-3.2-1B-Instruct \
-  --runner generate \
+  --task generate \
   --max-model-len 4096 \
   --enable-prompt-embeds
 

examples/others/lmcache/disagg_prefill_lmcache_v1/disagg_example_nixl.sh

@@ -122,7 +122,7 @@ main() {
 
     # begin benchmark
     cd ../../../../benchmarks/
-    vllm bench serve --port 9000 --seed $(date +%s) \
+    python3 benchmark_serving.py --port 9000 --seed $(date +%s) \
         --model meta-llama/Llama-3.1-8B-Instruct \
         --dataset-name random --random-input-len 7500 --random-output-len 200 \
         --num-prompts 200 --burstiness 100 --request-rate 3.6 | tee benchmark.log
@@ -133,4 +133,4 @@ main() {
 
 }
 
-main
+main

examples/others/tensorize_vllm_model.py

@@ -84,22 +84,18 @@ Or for deserializing:
 Once a model is serialized, tensorizer can be invoked with the `LLM` class 
 directly to load models:
 
-```python
-from vllm import LLM
-llm = LLM(
-    "s3://my-bucket/vllm/facebook/opt-125m/v1", 
-    load_format="tensorizer"
-)
-```
-
+    llm = LLM(model="facebook/opt-125m",
+              load_format="tensorizer",
+              model_loader_extra_config=TensorizerConfig(
+                    tensorizer_uri = path_to_tensors,
+                    num_readers=3,
+                    )
+              )
             
 A serialized model can be used during model loading for the vLLM OpenAI
-inference server:
-
-```
-vllm serve s3://my-bucket/vllm/facebook/opt-125m/v1 \
-    --load-format tensorizer
-```
+inference server. `model_loader_extra_config` is exposed as the CLI arg
+`--model-loader-extra-config`, and accepts a JSON string literal of the
+TensorizerConfig arguments desired.
 
 In order to see all of the available arguments usable to configure 
 loading with tensorizer that are given to `TensorizerConfig`, run:
@@ -120,9 +116,10 @@ the LoRA artifacts are in your model artifacts directory and specifying
 `--enable-lora`. For instance:
 
 ```
-vllm serve s3://my-bucket/vllm/facebook/opt-125m/v1 \
+vllm serve <model_path> \
     --load-format tensorizer \
-    --enable-lora 
+    --model-loader-extra-config '{"tensorizer_uri": "<model_path>.tensors"}' \
+    --enable-lora
 ```
 """
 

mkdocs.yaml

@@ -1,5 +1,5 @@
 site_name: vLLM
-site_url: !ENV READTHEDOCS_CANONICAL_URL
+site_url: https://docs.vllm.ai
 repo_url: https://github.com/vllm-project/vllm
 edit_uri: edit/main/docs/
 exclude_docs: |

pyproject.toml

@@ -72,6 +72,7 @@ line-length = 80
 "vllm/core/**/*.py" = ["UP006", "UP035"]
 "vllm/engine/**/*.py" = ["UP006", "UP035"]
 "vllm/executor/**/*.py" = ["UP006", "UP035"]
+"vllm/prompt_adapter/**/*.py" = ["UP006", "UP035"]
 "vllm/worker/**/*.py" = ["UP006", "UP035"]
 # Python 3.8 typing - skip utils for ROCm
 "vllm/utils/__init__.py" = ["UP006", "UP035"]

requirements/common.txt

@@ -33,7 +33,7 @@ pyzmq >= 25.0.0
 msgspec
 gguf >= 0.13.0
 importlib_metadata; python_version < '3.10'
-mistral_common[image,audio] >= 1.8.2
+mistral_common[opencv] >= 1.8.0
 opencv-python-headless >= 4.11.0    # required for video IO
 pyyaml
 six>=1.16.0; python_version > '3.11' # transitive dependency of pandas that needs to be the latest version for python 3.12
@@ -48,4 +48,3 @@ scipy # Required for phi-4-multimodal-instruct
 ninja # Required for xgrammar, rocm, tpu, xpu
 pybase64 # fast base64 implementation
 cbor2 # Required for cross-language serialization of hashable objects
-setproctitle # Used to set process names for better debugging and monitoring

requirements/cpu.txt

@@ -10,8 +10,7 @@ setuptools>=77.0.3,<80.0.0
 --extra-index-url https://download.pytorch.org/whl/cpu
 torch==2.6.0+cpu; platform_machine == "x86_64" # torch>2.6.0+cpu has performance regression on x86 platform, see https://github.com/pytorch/pytorch/pull/151218
 torch==2.7.0; platform_system == "Darwin"
-torch==2.7.0; platform_machine == "ppc64le"
-torch==2.6.0; platform_machine == "aarch64" # for arm64 CPUs, torch 2.7.0 has a issue: https://github.com/vllm-project/vllm/issues/17960
+torch==2.7.0; platform_machine == "ppc64le" or platform_machine == "aarch64"
 
 # required for the image processor of minicpm-o-2_6, this must be updated alongside torch
 torchaudio; platform_machine != "ppc64le" and platform_machine != "s390x"
@@ -26,6 +25,3 @@ datasets # for benchmark scripts
 intel-openmp==2024.2.1; platform_machine == "x86_64"
 intel_extension_for_pytorch==2.6.0; platform_machine == "x86_64" # torch>2.6.0+cpu has performance regression on x86 platform, see https://github.com/pytorch/pytorch/pull/151218
 triton==3.2.0; platform_machine == "x86_64" # Triton is required for torch 2.6+cpu, as it is imported in torch.compile.
-
-# Use this to gather CPU info and optimize based on ARM Neoverse cores
-py-cpuinfo; platform_machine == "aarch64"